Best 2014 Chevrolet Equinox Trailer Wirings

Exactly what I expected it to be and it was delivered very promptly

I installed a trailer brake kit on my Ford Ranger over a year ago, finding the misc parts and install kit with the help of the etrailer Folks. My truck was rear ended recently, smashing the 7 pin connector, that came as one part number for multiple parts, mounted through the bumper. Calling the etrailer folks, they were able to single out the part I needed without buying the entire install kit again. One five minute phone call and I'm on my way again! Very pleased!

Perfect . My new Subaru hitch has a flat plate to which the dealership attaché the 4-flat. I used “2 L-brackets” to accommodate the 90 degree bend of the adapter bracket.

I recently had a receiver hitch installed on my 89 Silverado and the wiring was merely zip tied to the safety chain connection. Well that didn't sit well with me. I wanted a more permanent wiring connection point. So I purchased your 4 flat to 4 flat and 7 way plug and installed it. So far so good. The installation turned out perfect and it looks good. The test lights are a great thing as well. I couldn't be happier.

Arrived quick and is exactly what I ordered!

Love the built in tester

Love the built in tester

Useless- how many towed vehicles are within the three foot length of this cable? Do not order this with the wiring kit for your towed vehicle that lets you use the vehicles tail lights instead of the magnetic lights. The tow bar between your motorhome and the "toad" is around 4' long. I'm not sure what this can be used for.

Well made

Works great as an adapter. I used it to convert a truck camper electrical harness to a Lance camper receptacle.

Hooked up only 12 volt for charging the battery on my dump trailer. Works fine.

Product is exactly what I want, but should include a dust cover. Also, wire that leads from plug is too long, and the tail light wire is too short. Where they connect should be closer to the plug, because the way it is you can't really unplug it from underneath the vehicle.

Works great , eazy install.

Worked out well.

2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.

My trailer has a reverse lockout that requires the back-up light signal to disable its brakes when backing up. This adapter did the trick perfectly.

Simple and easy to use; just plug it in and connect it to the trailer harness. Works like a charm!

The plug is different from original cord. Doesn’t look as good but we’ll see how it works. 1st new cord

It's a bundle of wires with a plug. Hard to make this type of part special above other brands. Price is the big factor. Not quite sure why this one is 50% less cost than some others. But works as expected. Solved the dreaded taillights blinking while traveling on the road.

This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.

Decent enough plug. It was an easy install. I would have liked to have allen screws to get a good bite, but will check the connections after a use or two.

The person who helped me find the correct part went above and beyond just taking my order and helping me find the correct part. Now I know why my dad suggested that I try etrailer to find the part I needed.

Perfect replacement

It served its purpose to convert 4 connection to 7 connection to make it compatible with Toyota 7 connection set up diagram which is different than many American or other 7 point connection. Thank you E-Trailer . 5 stars and it's working just fine 1 year out from installing.

Used to make a test lead when trouble shooting new GM trailer brake controller and kept as spare.

Have yet to install on the vehicle - Product seems to be a quality item

Want I ordered

Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.

Very sturdy and secure attachment, much better than the cheaper plastic ones that I have had break before. However, the rubber boot doesn't stay around the wire attachments

This trailer plug has everything I wanted. I have a 5 way plug on my boat trailer, I can still use it with a 4 way plug and I will be able to use it with the travel trailer I am planning to buy. I have not yet installed it but I unpacked it and it looks very well made. I have purchased other products from eTrailer and I have not been disappointed with anything's price or quality. Bob

Love the compact size for both 7way and 5/4 way connections. Install was pretty easy. The wire instructions are for a traditional 7 way color code. Would be nice if they included a RV color code and heavy duty. But just a multi meter or cross reference with your wires manual is all that's needed. I did not give 5 stars because I did not like the 2 flimsy hook connection to attach the wire shield backing to the connector. I reinforced with some black tape because it was sperated. Also would have liked if the 5/4 way door was spring loaded just like the 7 way. I mounted my connection sideways to use gravity to help keep that flap close.

Very easy to install.

Working great

This is very heavy duty looking connector and wires. I needed one to replace the damaged one on my Demco car hauler which is built for rental market. This looks as heavy duty as the original. Which didn't break but someone let it drag on the ground and wore half the pins off.

I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer

I ordered and paid for a roadmaster 6 pin connector and was sent a made in China piece of junk. Etrailer has attempted to send the correct connector 2 additional times and have failed! Once sending the bracket I ordered and not the connector and then sending yet another China made piece of junk!!

For the installation the instructions were good, but watching some videos made it much easier to take apart a brand new car. All went well. Installed on a 2020 Chevy Equinox 2.0

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

Works for me??. Just needed a longer one for my utility trailer since I switched vehicles. Always easy and fast to work with etrailer. Thanks again