Best 2013 Jeep Patriot Trailer Hitch Ball Mounts

Very good product fit perfect on a 2012 jeep patriot Thanks etrailer!

Fits the Hitch perfectly.

Bought this for my 2012 Jeep Patriot and it is the perfect rise for what I need it for. The 2-3/4" rise is just what you need for the Draw-Tite setup on a Patriot.

This product has arrived in excellent condition, but has not been installed yet. Thank you for such great customer service, and sending it in such a timely manner.

Bought this for my 2012 Jeep Patriot and it is the perfect rise for what I need it for. The 2-3/4" rise is just what you need for the Draw-Tite setup on a Patriot.

This product has arrived in excellent condition, but has not been installed yet. Thank you for such great customer service, and sending it in such a timely manner.

I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.

Click to Enlarge

Easy install, took around 30 minutes by my self to install. Hardest part of install was torquing the bolts ! Installed 13322 Class III Hitch - Gm 1500/2500 Pickup and Curt Class III Ballmount -2ball-2 Drop

Click to Enlarge

Click to Enlarge

This item was exactly as described and, as usual, etrailer got it to me quickly.

the raised ball is needed because the car sets so low.

great quality product

Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.

With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.

great quality product

Cool to follow up on your product. The multi-ball works as it should. I bought it since I didn't know if the trailer I would get would be 2" or 2 1/4. I tow a 4,000 # trailer/race car with it. It's a heavy piece to carry around, but I feel that it will last a good many years. I did make a spacer to cram into the receiver, so the hitch doesn't rattle as much. Otherwise it's great. Tim E.

the packaging showed up as a mess, need to see if its damaged when I open it

Click to Enlarge

Works perfectly. Fast shipping. Very Satisfied.

Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .

Click to Enlarge

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.

Love it ! Great product for the price

There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Exactly what I needed. I bought this Mercury Mariner used and it had factory installed hitch with a 1 1/4 receiver. I needed a drawbar with a substantial drop to tow my utility trailer somewhat level. Local shops had lots of 2 inch drawbars with drops but no 1 1/4 and I was even told that they weren't made and I would have to use a 1 1/4-2 inch receiver adapter do get what I wanted. You folks had what I needed and it arrived quickly. I should have looked here first.

I have a 2012 Outback. The car has more ground clearance than my previous Outback so the 2 1/2" drop on my old drawbar resulted in the rails on my motorcycle trailer tilting backwards slightly. This made loading the motorcycle a bit tricky because it wanted to roll backwards when loaded, until strapped down. I looked all over town for a drawbar with more drop but was unable to find one. Finally found this drawbar and it worked perfectly with enough drop to level the rails on the trailer. I also like the fact that it is a bit shorter than other drawbars and doesn't stick out as far.

Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.

This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.

Great ball mount for the price fits like a charm. made in america.

Product is awesome. Shipping container was destroyed when it arrived. Product was not hurt.

Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.

great quality product

Well constructed solid draw bar! Very happy with it. I am using the draw bar on a 2012 Jeep Patriot to pull a small trailer. Clears the rear body nicely giving plenty of clearance, but not too much to make it look funny.....just right. This is my second buy through etrailer. They are outstanding in customer service. Very nice and helpful people. I highly recommend them!

This item was exactly as described and, as usual, etrailer got it to me quickly.

Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.

great quality product

As advertised and quick delivery, I am an Etrailer fan!

Strong and works perfectly!

Purchased for a Dodge Journey with vertical mount hitch. Waited 5 months to get one from Chrysler and finally gave up found this one online. Sturdy design and does what I need it to. My only complaint is there is no recessed slot for the hitch ball to screw in tightly.

Tried to get this from the Dodge who put on the hitch. After six weeks of waiting I called you and got it in two days. Thanks.