# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
The rack is much bigger than my previous one. I was disappointed that it was made in China instead of the USA. It assembled very easily and the light kit works very well. The only draw back is I can no longer open my tailgate with the rack installed due to the spare tire hitting the raised rack.
Purchased in March 2023. I really like the size, it holds a lot. The carrier is very sturdy, well made and assembled very easily. I purchased the light kit but found wiring could have been a little longer to dress the cables neatly down toward the hitch.
# 2
19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs
Purchased this 1 year ago. Worked awesome for a 9.000 mile cross country trip with three off road adventures at geology tour road Joshua tree, west side road Death Valley, and kingman wash lake mead. No rattle, always secure, great clearance. Would purchase again.
It works, but I only put two electric bikes on it. The mesh seems to bend pretty easy.
# 3
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
We just installed our carrier. We love that this is going to free up a lot of space for our vacation traveling. Very heavy duty and bigger than i was thinking it would be.The pin that holds the carrier in the hitch was not included. It would have been an added bonus if it was.
This cargo carrier fits perfectly behind my 2023 CR-V. I use it for hauling bags of grass to the yard waste. It is almost a two person job inserting it into the receiver though. Seems well made and well finished.
# 4
Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
I can't say I'm entirely happy with my purchase. The instructions were more confusing than helpful. Note in "instruction.jpg" photo of STEP 1 that the text says to put the 8 small bolts in from the inside first, but the drawing clearly shows them as going in from the outside. The last step says to place the ramp onto the receiver as shown.... glad I didn't throw away the box because there is no drawing that shows ramp installation. Actually, the photo on the box was more helpful than any of the instructions. Also, I need to make a trip to the hardware store to buy longer medium bolts because the ones that came with the carrier were not long enough to fully engage the self locking feature of the nylon lock nuts. At a minimum a couple of threads should protrude beyond the nylon. See photo "nut.jpg". The bolt threads don't reach the end of the nylon, so the self locking feature is not fully engaged. I did tighten the nut, but that was as far as it would go. I think once I get back from the hardware store with the new medium bolts and after I reverse the 8 small bolts (I followed the drawing and not the text of the instructions), I'll be OK with the carrier.
"Instantly Get Rid of Wobble and Upgrade With Lights" This is not a 5 because ramp should be longer & there should be some type stabilizer to temporary hold bike while strapping down, I'd pay more for those upgrades. The wobble can instantly be solved by hooking Tie-Straps closest to vehicle directly to the receiver where you hook your chains, rather than hooking them to the provided holes on carrier itself. You of course use the provided strap holes ones on the opposite side. When strapped down as stated, the carrier now becomes one with the vehicle & @ 80mph there is no wobble. (*TIP: Put ramp back in its place before strapping down or else it won't fit with the strap hooks in the way.) I upgraded mine with lights for both safety reasons & not needing the Police any reason to pull me over. It was very simple and cost me nothing but time & maybe $50. I recommend this product whole heartedly.
# 5
23x59 Stromberg Carlson Cargo Carrier for 2" Hitches - Steel - 500 lbs
Carrier and box will be moved to hitch on 209 Solitude Rv to provide extra cargo carrying ability
A good size and very strong. I like the fact that it has a grated bottom, as opposed to a few bars like many of its competitors. There are many holes and notches present for any customization desired. Also makes for a great chair to relax. I also ordered the anti-rattle pin so as to fasten this tightly to the hitch. IMO that should be included with any of these trailer-hitch-Mount accessories.
# 6
24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs
I bought this to carry a Westinghouse igen4500 on the rear of my 5th wheel. So far it's been perfect for the job. The quality is very good. The carrier is sturdy and is highly adjustable. I searched for a long time for the smallest carrier that would fit my generator with the greatest weight capacity. The TorkLift, while a bit expensive, fit the needs perfectly. I had extra reinforcements welded from my trailer frame to the hitch point, added an anti-rattle receiver lock and we now have the perfect generator carrier solution. Hope this review can save others time in their search for the same kind of solution.
The Carrier is perfect, we had one previously. It perfectly fits and clears our spare tire. The Firman 4000/3200 Generator fits perfectly. We did add some damping pads under the wheels and the feet of the Generator to prevent vibration. Great security mechanism. Highly recommend this tray and other Torklift Products. Note: we rarely use the gas furnace, the exhaust is right there, heat shield blank to deflect heat if needed.
# 7
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
I received the package in a pretty rough exterior condition but everything was fine inside. The previous comments about having to cut away the expanded metal flooring in order to install the carriage bolts wasn't true in my case. Apparently, this quality control issue has been addressed by the manufacturer. Assembly went well and wasn't complicated. A different carriage bolt with a longer square shoulder should be used. The shoulder doesn't grip too well to the square cutout in the frame and even while pressing firmly on the head of the bolt, it wanted to turn as I was tightening the nut. All in all, it seems to be a solid product and I look forward to using it.
I wish the load capacity was a bit higher, but overall I am satisfied with the cargo carrier. It is perfect for lugging my two dog crates behind my vehicle instead of inside the vehicle. Thank you for offering a dimensionally larger cargo carrier than most retailers.
# 8
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Installation: Easy Assembly: Easy Attached to: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # C13163 Use: Camping equipment. Cooler, Chairs, Sleeping bags, firewood, etc. Like: The fact that it folds is a huge positive. What I would change: perhaps adding a ring or two on the sides to allow for bungee cords or rope. Because the hitch is already a bit low on the 2017 Mitsubishi Outlander (stock wheels, tires, suspension) the back part of the basket can bottom out rather easily. It has nothing to do with the carrier itself though. I would definitely recommend this product! I'm going to use it again in a month for our next camping trip.
This carrier was super easy to assemble. It is a bit heavy but I was able to mount it onto my hitch alone. I’m using an anti-rattle lock and they work great together.
# 9
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
Super disappointed in this etrailer purchase. The product came in a large box that was fully intact and not damaged. The actual cargo basket was meticulously wrapped and appeared to be brand new as expected. The other components however, like the arm, were in boxes that were smashed, old, worn, and had multiple layers of old tape. The arm itself was scratched and banged up, even rusty in spots. Clearly it was used or had been a returned item. If I wanted a dented, gouged,and rusty Cargo Carrier I would have purchased one used, for half the price. This is not the quality I expect from etrailer.. I have purchased many racks and other items from this company and usually the quality is outstanding. This time they dropped the ball. I have since read other reviews and it is apparent that this is not an isolated incident. I'd have sent it back if it wasn't so damn heavy and awkward to lug around.
This carrier worked out great. The tilt down feature is helpful to have but I didn't really need it. However, the fold up feature was helpful when driving around, so I recommend that as a convenience. The only thing I had trouble with was the hitch bolt. I have a Thule bike rack that I've used with my truck hitch receiver and never had a problem, but this rack's hitch bolt was a real pain to get in at first. Don't be dismayed. With the rack off of the vehicle, I used some WD-40 and some lithium grease on the bolt and then used an adjustable wrench to screw it in and out a number of times. I noticed a bunch of either paint or metal shards gumming up the threads on the bolt each time I removed it. After about 5 times of screwing it in and out, wiping off the bolt with a towel, adding some more grease once in a while, it got to the point that I could screw it in and out by hand pretty easily. Problem solved. I'm really happy with this rack. It fit two big coolers of food and beer plus beach umbrellas and other stuff. It's really strong and sturdy. The biggest issue was not the weight on the rack, but whether the rear suspension on the Highlander could hold it with our other junk in the back plus passengers. :-)
# 10
Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers - 2" Hitches
Very interesting! I am pleased with this purchase. All of this equipment is well built and was designed with ease of use and security in mind. The hitch part is surprisingly pretty heavy, but once it is connected this weight gives the hitch a sturdy feel. The lockers are pretty big and the material though light weight feels like it will hold up to some rough miles and a few bruises. It is so nice to have this much dry secure and easy to access storage outside of our vehicle. Customer service was excellent and delivery times were surprisingly short.
Very easy to install. Total installation time (not counting taking photos and opening boxes) was approximately 15 minutes. The only issue I encountered was the left handle on the lower rack had a broken piece inside the locking pin assembly. Other than that, everything was quick and smooth for a single person job. This will greatly assist my business by allowing more room for passenger comfort on long trips to and from airports with a large party. Looking forward to putting this to use.
# 11
20x48 Reese Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
This is a sturdy carrier. Welds all seem good. Paint is just fine. Steel tubing is very strong. The weight is heavy but reasonable for one person to install and remove. I plan to remove it when not in use on our trip to avoid having to fold it up and lose ability to access the hatch on our van. It has a bit of play in both the receiver and on the folding hinge. I’m going to use construction shims taped in place to reduce the wiggle but even without those, it’s not bad. Even with a jumbo cooler, we can still see the plate. This will do the trick for vacation and camping gear without having to haul a massive 60” carrier. Love the size and build.
Product came in a single box in perfect shape. Great construction, easy to put together. I bought this to go on the front of my John Deere Gator 855D. Sometimes, there just isn't enough room to pack everything you need when going down the trail or you don't feel like slinging a Honda generator and a heavy cooler packed full of ice and your favorite beverages up in the back of the bed. This cargo carrier fit the bill perfectly. It took all of 5 minutes to put it together and slide into the front 2" receiver on my gator. With the fold up design, I have 22" of clearance between the ground and the bottom of the carrier when carrier is folded out horizontal. Being the carrier is 48" wide, it is narrower than the gator, so I don't have to worry about trying to squeeze through a tight space in the woods. If the gator will go through the space, so will the carrier rack. When I don't need the carrier, it is a snap to pull the pin, swing the carrier rack 90 degrees up and pop the pin back in. Even when folded into the upright position, you can easily see over the carrier rack. Thanks for making a great product.
# 12
GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out - 34 cu ft - 300 lbs - Dark Gray
We looked all over for a hardshell storage pod, one that would fit 300 pounds of embroidery hardware. This one from Gearspace fit the bill. Super easy checkout with etrailer.com, and they were the only ones to offer free shipping, and since this is a larger, heavier item, that means LTL Freight. Not [online vendor] and not the Mfg. The GearSpace 34 arrived earlier than promised, and it was an easy unload if you have room for a sixty foot tractor trailer. 190 lbs on a pallet, but it will load right into the back of a pickup real easy. Took about 30 minutes to install, and it went like a breeze. Light test, check... signals, check. Ready to roll on our next RV trip, with lots more room for goodies along the way. This item gets an A+, it works as advertised, and etrailer.com was GREAT. They communicate often and update on order status. even sent out an email to get customer feedback and review, along with some pictures. I'm sure after this stellar review they will send me a nice etrailer hat & Koozie Pictures show the Gearspace 34 loaded with about 200 lbs right now. It never moved an inch and is solid on the mounting hitch hardware. You will not be disappointed with this product, it's top of the line for RV rear storage.
The gear space was delivered assembled; it took m15 minutes to attach mount into receiver and secure. My wife and I were able to lift onto mount with no problems. Looks great on the back of our Renegafe Vienna. An excellent solution to additional storage for full time Rv.
Darby Extend-A-Truck Hitch Cargo Carrier Review - 2012 Ford F-150
Today on this 2012 Ford F-150, we're going to be test-fitting the Darby Extend-a-Truck hitch mounted load extender, part number DTA944. We already have it installed on our truck and we have it in the first position. This is going to be in the raised position. Now this can be adjusted for various heights to match up with either your camper shell or your roof rack on your truck, and you can use this to help tie down lumber loads, PVC pipe, or as in this case, roof accessories such as kayak carriers. To tie those down there's going to be two loops up at the top on either side and you can use a wide variety of straps to do so. With it in this position, I'm going to go ahead and give you some measurements now.
MaxxTow Hitch Cargo Carrier Review - 2012 Ford F-150
Today on our 2012 Ford F150 we've got the MaxxTow 21" x 48" Aluminum Cargo Carrier and we're test fitting it. Now, this cargo carrier is designed to carry up to 500lb and it's also for use with inches hitches. Part number on it is MT70422. This is a very light weight, easy to handle cargo carrier that's one of my favorite things about it. Mainly aluminum construction and the main steel shank running through middle here give us that great capacity. We've got an aluminum sladed for floors, so you can imagine that's going to allow for a lot of dirt and debris and stuff like that to fall down and out. If you plan on transporting really small items maybe not the best plan. As far as the raised edge around the outside it's going to be about two inches high, so that's going to give us plenty of room for stability.
Stromberg Carlson Hitch Cargo Carrier Review - 2012 Ford F-150
Today on our 2012 Ford F-150 we've got out the Stromberg Carlson 23x60 cargo carrier, we're going to test fit it. This carrier is designed to carry up to 500 pounds, and it's going to work great with two inch hitches. Part number on it is CC-100. One of the biggest standout features I think about the carrier is the size of the expanded steel floor. That's larger than what we typically see, so even if we've got larger, chunky mud and stuff it should fall down in through there without building up on top of our carrier. We've also got a small raised edge around the outside, you can see that's about two and three quarters of an inch high, offers this stability and also a lot of nice connection points all the way around so we can get our gear secured once we've got it loaded up. Now all told, got about six and a quarter inches of total thickness, so as we put that up against the wall in our garage if you can imagine, it's not going to take up a lot of room.
Curt Hitch Cargo Carrier Review - 2012 Ford F-150
Today, on our 2012 Ford F-150, we are testing the Curt 20x60 folding cargo carrier. This cargo carrier has been designed for use in two inch hitches. It offers a five hundred pound weight capacity. The part number on it is C18151. Now our carrier, as you can see, has a nice raised rail all the way around the outside. I really like that it gives a lot of load support.
Curt Hitch Cargo Carrier Review - 2012 Ford F-150 C18150
Today on our 2012 Ford F150 we've got out the Curt 20 X 60 cargo carrier and we're testing it. This carrier has been designed for use in 2" hitches and it has a capacity of 500 lbs. Part number on it is C18150. I really like the rail on this carrier. It's a nice high profile, it's going to give us good front to back and side to side stability for our gear. You can see there it measures about 5.5 inches high. The expanded steel that we've got on the floor here, it's going to be along the smaller side so it's going to give up great support for smaller diameter items or something we might be putting on there, but still plenty of room for the dirt and debris to wash down and out.
What our customers are saying:
"I am very pleased with the speed at which my order was put together. I ordered the cargo carrier product on Tuesday morning and it was on my doorstep by Thursday afternoon - and this was the free shipping method. Overall, the priduct is rigid, and appears to be able to do the job nicely."