# 1
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
My sister and I love this bike rack! It's so easy to use and adjust for different sized bikes. When we're not using it we simply slide it out from the hitch assembly and fold it up and put it in the trunk of the car. So happy we bought it!!
Excellent product! No need for an additional piece to accommodate my ladies bike. I can easily open my hatchback without removing the rack.
# 2
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
This was a present for my daughters Mazda 3. We like how easy it is to mount the bikes and that you don't have to take the frame bag off the bike to use it. It is a good option for someone looking for an affordable entry level rack for occasional use.
I bought this rack and a hitch from Etrailer to carry bikes on the back of a 2015 Mazda 3 hatchback. The Etrailer website was GREAT in helping to pick the products. The rack arrived on time as promised. I opted for the XC2 over the slightly more expensive XTC2 because I didn't like the XTC2's plastic straps (in my limited experience, similar plastic straps end up stiffening and breaking over time). As long as the 'hooks' are pushed firmly down on the bikes, the bikes are held very steady. I like that the 'hooks' are held down by a ratchet mechanism rather than the tightening knobs that many competing racks use. The hatch door can just barely be opened when the tower and wheel racks are in the upright (folded up) position. Of course, with bikes on the rack, the hatch cannot be opened. It rides very well on smooth roads. It seems to wobble quite a bit when I jiggle it by hand, which makes me wonder how it would do on rough roads, but the construction seems strong so I won't worry about it. I think any hitch mount will wobble just as much. So far, I've made one 100 mile trip and I'm completely pleased. One more note: the tire racks have hand knobs to tighten the racks into place. At first they were really hard to tighten and didn't seem to hold well. Then I discovered I had put the tire racks on upside down, hence the knobs were on backwards. For some reason it makes a BIG difference! Once on correctly, the knobs worked perfectly. Read the instructions :-)
# 3
Swagman Trailhead Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
Great bike rack. Sturdy support for up to two bikes. Can rotate the support arms down when you aren't hauling a bike to minimize the obstruction of the back window.
Easy to install, saved quite a bit compared to the big brand name products. The big name products have some easier mechanisms to fold up and down but considering how much I saved, I don't have any complaints.
# 4
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
The good: I like the way the bikes are held in and the ability to add the upright adapters to the bike frame holders. The straps are quality too. For a jeep with a spare tire, this is the perfect length to clear it. This rack is 5 stars from the bike holders to the base of it. The bad: the 2"receiver adapter and bolt are insufficient. I wish they made this in a solid 2" hitch. The entire setup is held into the receiver by a very short bolt. It only goes about half way into the receiver tube. So your hitch is only "secured" on one side. A hitch pin or bolt should go through the receiver tube completely imo so it can be secured on the other end with a retaining clip or nut. Because this only goes in the one side, the entire weight of the rack plus bikes are held tight to one side of the receiver by the undersized bolt and washer. A few bumps down the road and that bolt loosens. Now instead of distibuting the weight of the rack and bikes on the receiver and post, it's completely up to the bolt to keep you from losing the rack. The bolt threads get damaged too. I took this down a dirt road and nearly lost everything. I had to buy my own bolt with hd fender washers and lock washers to correct this. Thule should've provided this from the start. The current short bolt design where only one side of the receiver secures the rack is unacceptable. This rack is 1 star at best for the connection to the receiver.
Hitch pin broke before I got it. Looks like a poor design for the locking pin, they might want to consider a different design. I got a 3/8 shear pin from Home Depot to replace and it works great. Bike rack is great!
# 5
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Very study and enjoy the locking systems included. However I was a bit disappointing in a few parts of this hauler. The wheel housings being make of plastic vs metal like everything else has me a bit concerned on the lifespan since when you set it down the rack typically rests on the housings. Also one of the bolts holding the cross bar is the absolute minimum possible, so with a slight out of tolerance in the bend angle of the center housing, it was a significant effort to install the nut (I had to bend the lock-washer to be much closer to flat to get access to a couple threads on the bolt). Lastly I wish the locks between the locking hitch pin and the locking vertical hooks were on the same key. Despite the disappointments, it fits virtually all sizes of bikes, securely, and includes excellent features for the price point.
Superior fit and quality of materials. Packaging was thoughtful, easy to follow instructions.
# 6
Kuat Beta Bike Rack for 2 Bikes - 1-1/4" Trailer Hitches - Tilting
I was looking for a light weight bike rack for my 2015 Honda Accord. Your videos stated that the Kuat Beta was light and easy to install. You were right. I opened the box, read the instructions, and had it installed in about 10 minutes. I don't use a rack lock. It is so easy to pop on and off the hitch that I keep the rack in my car trunk.
We've been using this bike rack with a 1.25" Draw-Tite receiver hitch (also purchased from etrailer) on a 2012 Prius C for a month with no problems. As shown on the pictures, it fits two bikes very well, even one with a baby carrier. I chose this model based on recommendations from etrailer that it can be easily detached from the car without tools. True to their word, it is very easily detachable from the hitch and folds up nicely to fit in your garage/closet/storage area. Basically, it uses a hand tightened ball bearing mechanism to secure itself into the hitch receiver, and then uses a 3/8" hand locked pin as a safety device. You can install and de-install this rack in just a few minutes. During driving, there is little noticeable vibration from this rack, even on rougher roads or speed bumps. The only downside is that the holes on the receiver hitch do not align perfectly with the holes on the bike rack (see picture). I believe a few other reviewers also noted this issue. There is enough room to fit the safety pin, but not quite enough to fit a 1/2" hitch lock. I called Kuat to ask them about this and the rep told me that not all hitches will line up with this rack. Kuat, coincidentally(?), sells a hitch lock that is also 3/8" (same size as the safety pin) and still fits.
# 7
Swagman Upright Bike Rack for 1 Bike - Roof Rack Crossbars - Frame Mount
Planning on bringing bikes while camping. I mounted 2 of the Swagman bike racks to my new Sportrack on my pop-up camper. The bikes fit perfectly. The racks seem sturdy enough. Not heavy duty, but for my needs they should be fine. Assembly was relatively fast and easy.
We have used the Swagman Roof Rack a number of times when we have needed the additional bike carrying capacity. It took a couple attempts to get the initial spacing of the bike rack properly balanced on the van’s roof rack as recommended by the instructions. But it was easy to do and once set was very easy and quick to put on and take off. The rack works great, the bike is easy to put into place and secure. The bike and rack are very stable and quiet and haven’t required any mid-trip adjustments. We always put the cheapest bike on the roof (lol) but do use a bit of duct tape to protect the finish just Incase. We are very satisfied with the rack and consider it quite a deal for the money.
# 8
Thule Passage 3 Bike Carrier - Trunk Mount
Product fit my Mazda3 perfectly. Instructions were clear and precise. Once assembled (about 5 minutes) it fit right on and is easily cinched down onto the back of the hatchback without damaging the spoiler. Comes off quickly and fits into the truck of the hatchback with no problem.
Nice Rack! Fits perfect and looks great on my Mazda3 hatch!
# 9
Swagman Trailhead Bike Rack for 3 Bikes - 1-1/4" and 2" Hitches - Tilting
Easy to install, saved quite a bit compared to the big brand name products. The big name products have some easier mechanisms to fold up and down but considering how much I saved, I don't have any complaints.
# 10
Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms
Well built product, priced right, and quick delivery. That's all one could ask for. Recommended!
Quality as expected, Delivery on Time, Customer Service Excellent, How to Video Excellent.
# 11
Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount
Overall I am happy with these bike carriers. They mount to the racks over the bed of my Tundra TRD Pro. Installation is simple. I think they could be just a bit sturdier because there is just a bit of wobbling when driving on bumpy roads but I'm not too worried about them coming dislodged. Take note that although they come with a cable lock to attach the bike to the carrier, the key is sold separately.
Very good product. It holds the bike securely on the roof without contacting the frame. It is easy to adjust from my road bike to my 29er mountain bike. Our drives are all relatively short, so I like that I do not need to remove the front wheel to lock in the bike. It's also nice that the SKS locking system allows me to use the same key for this rack that I use for my Yakima roof box and hitch rack. This is my first roof rack and I chose this route for a couple reasons. Some of the roads we travel to get to our trail heads are a bit rough and with a roof rack I don't have to worry about bottoming out a hitch rack hanging off the back of the vehicle. Also, it takes up less room in the garage. Our vehicle is a 2000 Jeep Grand Cherokee with an additional 4 inches of ground clearance. That makes it a bit of a reach for my 5'4" wife, so we take our two-step along to help her. This is my third time purchasing from etrailer, and each experience has been very good. They are a very customer service oriented company. I really appreciate all the additional information they provide on their products, especially all the videos they produce to aid in reviews, assembly, and use.
# 12
Hollywood Racks Express 3 Bike Carrier - Fixed Arms - Trunk Mount
Well made holds bike perfectly. Recommend it!
We have 2008 mazda 3 sedan and it fit perfect with 2 bikes. Great product!
Rhino Rack MountainTrail Roof Bike Racks Review - 2011 Mazda 3
Today on our 2011 Mazda 3, we're going to be test fitting the Rhino-Rack mountain trail bike carrier, part number RBC035. We got the bike in the rack installed on the Mazda's roof here to give you a nice idea of how everything looks installed. We can go ahead and dive into the details, but first, I'd just like to point out something that's often overlooked real fast, and that's the Mazda's trunk. There's plenty of clearance in between the rack and the bicycle, so it'll give you no issues there.Now, if you want to take a look at how the bicycle itself is secured to the rack, it's a very simple design. It's very easy to use. Simply the back tire is held on by this locking strap and the front is secured by this locking fork clamp.
Inno Roof Bike Racks Review - 2011 Mazda 3
Today on our 2011 Mazda 3, we're gonna be test fitting the Inno Fork Lock III bicycle rack, part number INA391. Now we got the rack and the bicycle installed on the Mazda's roof here to give you a nice idea of how everything would look. Then we can dive in and take a look at some of the details.First things first though, I'd like to show you that the trunk does have plenty of space to get in and out of, without interfering with the rack. That's something most people think past when looking into a bicycle rack. I'll go ahead and show you how the bike is secured to the rack. It's a very simple design, very easy to use.
RockyMounts TieRod Stretch Roof Bike Rack Review - 2011 Mazda 3
Today on our 2011 Mazda 3, we'll be test fitting the RockyMounts Tierod Stretch roof-mounted bike carrier, part number RKY1011. With the Thule roof rack system assembled onto our vehicle, we'll begin our test fit by placing our carrier directly onto our load bars. We'll remove the black plastic cover at the front and bring our rubber-coated straps around our load bar, fitting them back into the head of the carrier. We'll then use an Allen key to tighten the Allen bolt to tighten our straps around our load bar. Once we have that tight, we can then replace the black plastic cover. We'll move to the rear and bring our rear clamp around our rear bar, feed the bolt back through the clamp, and tighten down with an Allen tool.
Swagman Fork Down Roof Bike Rack Review - 2011 Mazda 3
Today on our 2011 Mazda3 well be test fitting the fork style roof mounted bike carrier from Swagman, part number s64710. With a Thule Aeroblade roof rack system assembled onto our vehicle, well begin our test fit by placing our bike rack directly onto our load bars. Well want to adjust it to go ahead and make sure that the holes that our bolts will go through arent going to interfere with the load bars. Here at the front, well take our u-bolts around the underside of our load bar feed them up through the platform and tighten it in place with the wing nuts. Well do this for both sides of the platform at the front of our carrier. Once we have that tight and secured, well move to the rear.
Thule Raceway Trunk Bike Rack Review - 2011 Mazda 3
Today on our 2011 Mazda 3 were going to be test fitting the Thule Raceway 2 Trunk Mount Bike Carrier, part number th9001. To fit the Raceway to our vehicle we need to make sure that the fit dial is set according to what we find in the instructions. Once weve done that, we can set the trunk mount rack on top of our vehicle. The upper arm of our carrier will rest on the trunk and the lower arm of our carrier should be positioned on the upper tier of our rear bumper. Well place the hooks on the top at the trunk gap right by the rear windshield. Then well take the other two hooks and hook them to the bottom of the trunk lid.
What our customers are saying:
"Great fast service. We are military living overseas and were pleasantly surprized by how fast we received our trailer hitch mounted bike rack."