# 1
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
This item was exactly as described and, as usual, etrailer got it to me quickly.
the raised ball is needed because the car sets so low.
# 2
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs
Well constructed solid draw bar! Very happy with it. I am using the draw bar on a 2012 Jeep Patriot to pull a small trailer. Clears the rear body nicely giving plenty of clearance, but not too much to make it look funny.....just right. This is my second buy through etrailer. They are outstanding in customer service. Very nice and helpful people. I highly recommend them!
This item was exactly as described and, as usual, etrailer got it to me quickly.
# 3
Draw-Tite Drawbar for 1-1/4" Hitches - 4-3/4" Drop - 7-1/2" Long - 3,500 lbs
Exactly what I needed. I bought this Mercury Mariner used and it had factory installed hitch with a 1 1/4 receiver. I needed a drawbar with a substantial drop to tow my utility trailer somewhat level. Local shops had lots of 2 inch drawbars with drops but no 1 1/4 and I was even told that they weren't made and I would have to use a 1 1/4-2 inch receiver adapter do get what I wanted. You folks had what I needed and it arrived quickly. I should have looked here first.
I have a 2012 Outback. The car has more ground clearance than my previous Outback so the 2 1/2" drop on my old drawbar resulted in the rails on my motorcycle trailer tilting backwards slightly. This made loading the motorcycle a bit tricky because it wanted to roll backwards when loaded, until strapped down. I looked all over town for a drawbar with more drop but was unable to find one. Finally found this drawbar and it worked perfectly with enough drop to level the rails on the trailer. I also like the fact that it is a bit shorter than other drawbars and doesn't stick out as far.
# 4
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Well constructed solid draw bar! Very happy with it. I am using the draw bar on a 2012 Jeep Patriot to pull a small trailer. Clears the rear body nicely giving plenty of clearance, but not too much to make it look funny.....just right. This is my second buy through etrailer. They are outstanding in customer service. Very nice and helpful people. I highly recommend them!
This item was exactly as described and, as usual, etrailer got it to me quickly.
# 6
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Great ball mount for the price fits like a charm. made in america.
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Bought this for my 2012 Jeep Patriot and it is the perfect rise for what I need it for. The 2-3/4" rise is just what you need for the Draw-Tite setup on a Patriot.
This product has arrived in excellent condition, but has not been installed yet. Thank you for such great customer service, and sending it in such a timely manner.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
Great ball mount for the price fits like a charm. made in america.
Product is awesome. Shipping container was destroyed when it arrived. Product was not hurt.
# 9
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 10
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.
great quality product
# 11
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs
Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.
great quality product
# 12
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
Heavy Duty Drop Down Hitch no problem pulling a 10,000# trailer
It fits perfect on my f350 diesel, super heavy duty. I'll be using it for towing my car tilt bed trailer.
# 13
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Love it ! Great product for the price
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
# 14
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.
great quality product
# 15
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .
Works perfectly. Fast shipping. Very Satisfied.
# 16
Curt Vertical 2" to Fixed Ball Mount - 12-3/8" Long, 2-1/4" Rise
Purchased for a Dodge Journey with vertical mount hitch. Waited 5 months to get one from Chrysler and finally gave up found this one online. Sturdy design and does what I need it to. My only complaint is there is no recessed slot for the hitch ball to screw in tightly.
Tried to get this from the Dodge who put on the hitch. After six weeks of waiting I called you and got it in two days. Thanks.
# 17
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Bought this for my 2012 Jeep Patriot and it is the perfect rise for what I need it for. The 2-3/4" rise is just what you need for the Draw-Tite setup on a Patriot.
This product has arrived in excellent condition, but has not been installed yet. Thank you for such great customer service, and sending it in such a timely manner.
# 18
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Very good product fit perfect on a 2012 jeep patriot Thanks etrailer!
Fits the Hitch perfectly.
# 19
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
great quality product
Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.
# 20
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Needed better drawbar for my hitch as my old one was not long enough for my new vehicle and had trailer right at the bumper which I didn't like this new one is long enough that it sticks out past my bumper on my 14 Jeep Patriot.
great quality product
What our customers are saying:
"This site is top notch: Great prices, great service. Highly recommended."