bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 0 Inch
  6. Rise - 1 Inch
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs

lowest price pledge
Retail:$48.40
Our Price: $25.46
You Save: 47%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
Quantity: 
Draw-Tite Steel Shank - Gloss Black Trailer Hitch Ball Mount - 3590
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection. Lowest Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs part number 3590 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1703)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 0 Inch
  • Rise - 1 Inch
  • No Ball
  • Class I
  • 2000 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class I and Class II compatible
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Length: 6-5/8" from center of hitch pin hole to center of ball hole
  • Rise: 5/8" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

3590 Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs

Item # 3590




California residents: click here



Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs - 3590

Average Customer Rating:  4.8 out of 5 stars   (1702 Customer Reviews)

Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.

- 3590
by:

It fit great with my Draw-Tite receiver hitch.



- 3590
by:

The hitch was well made and relatively easy to install. I installed it on a 2016 Golf Sportwagen LE. I can confirm that as others have stated that I did NOT need to trim the bumper fascia (as the instructions said I would need to). I separated the black, lower part of the fascia from the top part before reinstalling the main fascia. I was then able to snap the lower part on after fitting it around the hitch chain loops. A couple of other notes: the LE has the rear cross traffic alert. The sensors are bolted on each side of the bumper. I thought with the additional thickness of the sensors that the bolts might not be long enough but they fit fine. As has been mentioned in other reviews, the torx screws in the wheel wells have very little clearance. I highly recommend getting a torx racquet set. I bought one at a hardware store for about $20 (Kobalt 24-Piece Standard (SAE) and Metric Mechanic's Tool Set with Hard Case). This makes the removal of those screws straight-forward.



- 3590
by:

Service was outstanding, everything fit exact, and delivery on time. Most outstanding were the videos on how to install, spot on. Hitch took thirty minutes, wire harness forty-five This was on a Prius V. This will be used to pull a small boat , boat and trailer 600lb. Thanks for your outstanding help.



- 3590
by:

Joints are soldiered and have to wonder when under load, that is within specs if the pressure of pulling a small trailer( 3x5) loaded with about 500 lbs. over todays poorly maintained roads will hold up under the stress? There is a bit of a wobble when that mount is inserted into the sleeve of the hitch and I am a bit concerned that the loose fitting may also impacted on this mount to function properly!



- 3590
by:

Heavy duty should work great towing my small utility trailer. Installs on my receiver hitch in seconds.



- 3590
by:

Good solid product. Performs as expected. I would recommend to others.



- 3590
by:

Good piece of steel



- 3590
by:

Product was as described, but, more importantly, there was a very small issue and it was promptly handled very professionally. etrailer is very refreshing in an old style sort of way and only old guys can truly appreciate them. They do business as if I was the only customer they have! Very prompt, professional, and first class in all things!



- 3590
by:

The Draw bar and Ball arrived today with no problems. The sales rep, John, was very helpful when I called to order these products. I am very happy with the hitch that I ordered previously and the Draw Bar and Ball that I ordered this time. Thanks



- 3590
by:

The trailer hitch for my 2001 CRV was a perfect fit. In my case, the product arrived the next day. In my dealings with etrailer, I found them to be courteous, knowledgeable and very helpful.



- 3590
by:

Well-built, but it's not obvious which end is up! My mechanic installed the hitch ball on the wrong side.



- 3590
by:

Everything was as described and the team at etrailer did a fantastic job of keeping me up to date on my order. I recieved updates while the product was in route and a follow up email to confirm everything was OK. Job well done!



- 3590
by:

I am Extremily Happy with the Trailor Sport Hitch Package that I recived in 5 days in very good condition from ETRAILER CORPORATION, Thank You. I will be back



- 3590
by:

Quality product; very sturdy. Included pin has a groove on one end rather than a hole to hold the cotter pin. Seems secure but I haven't really tested it on a long trip.



- 3590
by:

Looks like it will work. Seems solid and well built. Ball was installed easily enough and the holes seems to line correctly.


Comments
Glad I bought with hitch. Works well and perfect for my needs.
Matthew - 09/17/2020


- 3590
by:

Was a match for the hitch I purchased and worked great



- 3590
by:

The product was as described and shipped quickly. It is of high quality and strength and fits perfectly for our utility trailer.



- 3590
by:

Excellent transaction, fast shipping, product works with the hitch , very satisfied customer :)



- 3590
by:

Product was as indicated. Fit was good. Everything went well with installation.



- 3590
by:

I received my order fast, and all components acounted for. Constructed with thick steel, welds are clean, and even has a great paint job. Thank you for a great product!



- 3590
by:

Great drawbar and extra heavy duty bar.should work fine



- 3590
by:

:-)



- 3590
by:

works with my Passat


Comments
Great! Ive used it a bunch of times and it is always a perfect solution. I would purchase it again in a minute.
Stevein228 - 01/05/2015



- 3590
by:

It's a heavy welder metal bar with holes in the right places. :) Had a paint ding on mine, but I can't imagine that could stop this from working fine for decades.



- 3590
by:

VERY PLEASED WITH THE ITEM I PURCHASED. EXACTLY AS IT WAS INTENDED AND EVERYTHING FITS GREAT, THOMAS F.


25
1722
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch Ball Mount



  • Can a Trailer Hitch be Made to Fit a 1968 Ford Thunderbird
    A custom fit trailer hitch is not available for your 1968 Ford T-Bird. But you may be able to have a hitch custom made using some of the hitch fabrication parts that we carry. I have included a link to them for you. A professional welder or fabricator could make a hitch that will fit.
    view full answer...
  • Availability of Flat Ball Mount for Use in a 2-inch x 5/8-inch Shadow-Mount Hitch
    Thank you for providing a photo of your 2-inch x 5/8-inch shadow-mount hitch. This type of hitch is now obsolete and we offer no ball mounts for it.
    view full answer...
    Image 1 for
  • Comparing Class I and Class II Ball Mounts for Differences When They Appear Identical
    The Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs # 3590 will fit both Class I and Class II trailer hitch receiver. The # 36051 as you stated is only a fit for Class II trailer hitches. The reason for this is the rated towing capacity. Class I hitches are only rated for up to 2,000 lbs and there is often a welded stop in the shank to ensure only Class I rated accessories can be used so you don't have an issue with your 1-1/4 inch receiver for tongue weight...
    view full answer...
  • Is there a Way to Adapt Flat Bar Receiver to Regular Square Receiver on a 2000 Dodge Grand Caravan
    The only way to convert your hitch to a standard receiver would be to have one welded on. But the much safer option is to install a different hitch. I recommend Draw-Tite hitch # 36296 for the 2000 Dodge Grand Caravan because with it the receiver will be the only part visible and the receiver is tight against the bumper from better ground clearance. I have linked a video showing an example installation of this hitch for you.
    view full answer...
    Image 1 for
  • What is the Correct Ball Mount for a 2003 Toyota RAV4 with a Class I Draw-Tite Trailer Hitch
    On a Class I trailer hitch, you must use the ball mount recommended by the trailer hitch manufacturer or it will void the hitch warranty. this is because that specific hitch has been tested with and rated for use with a specific ball mount and has been determined to be the best option. This information can be found near the bottom of the hitch instructions, linked for reference. They state that ball mount # 3593 is correct for this hitch and vehicle. The instructions all state that it...
    view full answer...
  • Correct Ballmount for a 2008 Subaru Outback
    Both Class I and Class II trailer hitches are tested and rated with the specific ball mount for that hitch, therefore the ballmount used must be the one that is recommended by the trailer hitch receiver manufacturer. If your vehicle is equipped with a factory Class I, or Class II I can make the following recommendations based on the manufacturer. Class I or Class II hitch that is manufactured by Curt I recommend the # C45519 ball mount. Class II hitch that is manufactured by Draw-Tite,...
    view full answer...
  • Ball Mount Recommendation For Polaris Sportsman With 1-1/4 Inch Receiver
    The ball mount I recommend for your Polaris with the 1-1/4 inch receiver opening is the Sportframe Drawbar, part # 3590. This ball mount has a 5/8 inch rise, and measures 6-5/8 inches from the center of the hitch pin hole to the center of the ball mount hole. This is the closest we offer to the 4 inches you asked about.This ball mount uses hitch balls with a 3/4 inch shank. This ball mount comes with a pin and clip included. For a 1-7/8 inch hitch ball I recommend part # 19256, and...
    view full answer...
  • Parts Needed to Tow Small Trailer with 2012 Chevy Sonic Hatchback
    We only have Class I hitches available for your vehicle which have the 2,000 lb total capacity and 200 lb tongue weight capacity. If you are sure your trailer is under that weight and your vehicle's owners manual also reflects at least the same capacities you would be good to go with a hitch like the # 24878 that you mentioned. For trailer wiring you'd then want the part # 118640 which is a confirmed fit as well. For a ball mount you'd need the part # 3590, and for a ball # 19256.
    view full answer...
  • Recommended Trailer Hitch And Wiring for 2015 Honda Crosstour
    The trailer hitches we offer for your 2015 Crosstour are all Class l hitches and have a 1-1/4 inch receiver opening. The hitch I recommend is the Hidden Hitch, part # 24852. The hitch can be used for some light towing if that is what you have in mind.For a ball mount I recommend part # 3590. For a 1-7/8 inch hitch ball you can use part # 19256, and for a 2 inch hitch ball you can use part # 19258. If you need a trailer connector on your Crosstour I recommend part # 118642. This is installed...
    view full answer...
  • Measurement From Draw-Tite Hitch Receiver To the Ground On 2018 Toyota Prius
    The Draw-Tite part # 24966 for the 2018 Toyota Prius has about 12 inches from the ground to the top of the receiver tube when installed on a 2018 Toyota Prius which I have attached the installation video for. Please keep in mind, variables like tire size may change that measurement slightly on your specific vehicle. To figure out how much rise or drop you need to tow level, measure from the bottom of the coupler on your trailer to the ground. The difference between 12 inches and your...
    view full answer...
  • Trailer Hitch Recommendation for a 2013 Chevy Sonic RS
    I checked with Draw-Tite and they do list trailer hitch # 24878 as a fit for all models of the 2013 Chevy Sonic hatchback so that would include an RS. I have included a link to the installation instructions for you to view. If you plan on doing some light towing first consult your owners manual. For a ball mount use # 3590. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 118640.
    view full answer...
  • Does Draw-Tite Trailer Hitch # 24790 Include Mounting Hardware for a 2000 Honda CR-V
    Yes, trailer hitch # 24790 does include the installation hardware for installation on your 2000 Honda CR-V. I have included a picture showing the hardware. I have also included a link to the installation instructions to the right for you. If you are planning on doing any towing with the hitch, first consult the vehicle owners manual for the CR-V towing capacities. For a ball mount use # 3590. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118336.
    view full answer...
    Image 1 for
  • Trailer Hitch Installation Difficulty on a 1997 Honda CR-V
    We rate hitch installation difficulty based on how long it would take the average do-it-yourselfer who had all the required tools and perhaps a helper. We have rated the Draw-Tite Trailer Hitch, # 24790, for the 1997 Honda CR-V, a 5 out of 10 meaning that it will take about 50 minutes or so to install the hitch. I have included a link to the installation details below. If you plan on doing some towing with this hitch, Draw-Tite recommends only using ball mount # 3590. You can use hitch...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2014 VW Passat 1.8L Turbro Wolfsburg Edition
    For your 2014 Volkswagen Passat 1.8L Turbo Wolfsburg, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24880. This is a bolt on installation hitch with a sturdy square tube design. The Draw-Tite Class I hitches do not require a stabilization strap like the Curt hitches do for accesories. If you will be doing light towing with this hitch or want a lighted accessory, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer...
    view full answer...
  • Is Stabilizer Strap Really Required when Using Trailer Hitch on 2014 Volkswagen Passat
    The stabilizer strap like part # 18050 is required by Curt on their lighter duty trailer hitches like the # C11234 you referenced when carrying a non-supported load like a bike rack. I attached a video that shows exactly how it is used typically. Since I personally wouldn't want to mess with using the strap I would recommend you go with the Draw Tite hitch part # 24880 instead as it does not have this requirement. These hitches are pretty simple to install. A DIYer like yourself would...
    view full answer...
  • Trailer Hitch and Wiring for a 2017 Volkswagen Golf SportWagen Alltrack
    The Alltrack is a version of the 2017 Volkswagen Golf SportWagen. Curt and Draw-Tite indicate that their hitches fit all models of the 2017 SportWagen. So I recommend Draw-Tite hitch # 24949 since it does not have special requirements for using a bike rack or cargo carrier like the Curt hitch does. The recommended ball mount for this hitch is # 3590. For a 1-7/8 inch ball use # 19257 and for a 2 inch use # 19258. The trailer wiring harness # 118730 is also listed as a fit for all models...
    view full answer...
  • 2015 Chevy Sonic Hatchback Trailer Hitch and Wiring Recommendation
    For your 2015 Chevy Sonic the Draw Tite Hitch part # 24878 has been confirmed as a fit and will work well for light towing as long as you stay under the hitch's towing capacity of 200 lbs tongue weight and 2,000 lbs total trailer weight and the towing capacities for the vehicle listed in the owners manual. I attached an install video for you to check out as well. For trailer wiring you would then want the part # 118640, for a ball mount # 3590, 1-7/8 inch ball # 19256, and 2 inch ball # 19258.
    view full answer...
  • Trailer Hitch and Wiring for a 2013 Chevy Sonic RS to Tow a Motorcycle
    In order to transport a motorcycle using your 2013 Chevy Sonic RS it will have to be towed on a trailer. The problem is that the bike is too heavy to carry it on a hitch mounted carrier. They do make small trailers designed for motorcycles so you won't need a huge trailer. For a trailer hitch I recommend Draw-Tite model # 24878. The recommended ball mount is # 3590. For a 1-7/8 inch ball I recommend # 19256 and for a 2 inch ball I recommend # 19258. For trailer wiring I recommend # 118640...
    view full answer...
  • Trailer Hitch Recommendation for 2015 Honda Crosstour
    Torklift manufactures hitches that are designed for heavy duty applications like full sized trucks. Their hitches would have capacities ranging from 15 to 30K, which would be well over the towing capacity of your Crosstour. The hitches available for your 2015 Honda Crosstour are all Class I, which would have a 2000 lbs towing/200 lb tongue weight capacity. This capacity would be limited by the capacity of the vehicle itself, which is 1000 to 1500 lbs, depending on how its equipped. I'd...
    view full answer...
  • Trailer Hitch Recommendation for 2020 Volkswagen Golf Alltrack
    For your 2020 Volkswagen Golf Alltrack we have the Draw Tite hitch part # 24949 that I recommend highly. When it is installed only the hitch opening hangs below the rear bumper which makes it mostly hidden as well as helps with ground clearance. For trailer wiring then we have the ZCI part # 119250KIT which installs without requiring any splicing as well. Then for a ball mount you'd want the part # 3590 and hitch ball part # 19256.
    view full answer...
  • How to Find Out if a 2016 Volkswagen Passat SE has a Towing Capacity and How Much It Is
    If your 2016 Volkswagen Passat SE has a towing capacity it would be listed in the vehicle owner's manual. Volkswagen used to provide access to the owner's manuals online but now in order to view the manual online you have to put in a valid VIN for that vehicle. But your owner's manual would be the place to check for towing information. If you decide to go with Draw-Tite trailer hitch # 24880 the recommended ball mount is # 3590. For a compatible ball you can use # 19256 for a 1-7/8 inch...
    view full answer...
  • Trailer Hitch and Wiring for a 2017 Volkswagen Golf Alltrack
    Trailer hitch # 24949 is a fit for the 2017 Volkswagen Golf Alltrack. It also is listed for all models of the 2017 Golf Sportwagen. I have included a link to the installation instructions for you. If you plan on doing some towing the recommended ball mount is # 3590. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118730 to add a 4-Way flat to the rear of the vehicle. If you want to use the hitch for an accessory such as a bike...
    view full answer...
  • Trailer Hitch Recommendation for a 2012 Chevy Sonic Hatchback
    For your 2012 Chevy Sonic hatchback you can use Draw-Tite trailer hitch # 24878. I have included a link to the installation instructions for you to view. The recommended ball mount is # 3590. If you plan to tow, first check the vehicle owners manual for information on towing. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118640.
    view full answer...
  • Recommended Trailer Hitch For 2013 Volkswagen Passat TDI To Tow Trailer For Motorcycle
    I recommend installing a trailer hitch like part # 24880 on your Passat, and using a motorcycle trailer to carry your bike. None of the trailer hitches we offer are capable of handling a 550 lb motorcycle in a carrier. The trailer hitches we offer are all Class l hitches and have a 1-1/4 inch receiver opening. The ball mount I recommend for your hitch is part # 3590. Then for a 1-7/8 inch trailer ball I recommend part # 19256. For a 2 inch trailer ball I recommend part # 19258. You would...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Brandon M
Installed by:
Brandon M
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.