# 1
Curt E16 5th Wheel Trailer Hitch w/ R16 Roller - Slide Bar Jaw - 16,000 lbs
Etrailer sent me a one year follow-up email. Since purchasing this I've used it to tow our 11k lb camper about 5k miles. The hitch and slider have worked exactly as they should and I have no complaints.
Well, I haven't towed with it yet but we'll see how that goes. I purchased this hitch because I needed to drop the height as much as 6 inches. My previous hitch was dropped to the lowest setting and still 17 inches high! This E16 goes down to 14 inches... Assembly was straight forward and all pieces were present ( even 4 big washers which were not illustrated anywhere in the instructions as to where they went) The hitch seems well built but the welder needs to be more thorough in cleaning his Slag (got my finger good when I picked up the top plate) Stickers were falling off everywhere (my heat gun fixed those) But a couple notable design flaws... The top cradle for the 5th wheel plate is a triangular shaped arch and the top plate has an axle which is perfectly round. So when the 5th wheel assembly is down in the cradle, there are only two little points of contact instead of the cradle fitting uniformly around the axle rods...we'll see what kind of wear this causes. Next, the green ring on the indicator rod looked like a 3 year old toddler wiped lipstick on it. (Green paint is supposed to be in the little groove cut in the rod but instead, is smeared all over the end of the rod) Lastly... The side plates have a two rows of holes for height adjustment...I have installed the bolts to position the overall height at the lowest possible setting. However, there are two more holes in the tie plate but the casting prevents the sideplates from dropping down even lower. Definitely confused as to what the extra holes are for and disappointed that I can't drop this even lower... Definitely seems heavy duty, but again, I haven't towed yet, so hopefully the play in the base rails doesn't translate into obnoxious clanking and rattling.... If so, I will definitely be doing another review
# 2
Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000 lbs
So far it works great. Only pulled in a short distance and backed it up into my driveway. Make sure you have help lifting this. Very Very heavy. Directions were average but got the job done. Love the extra turning radius on my short bed F250. Make sure all the parts are there. The handle to release the king pin off the hitch was not in the packaging. The box that the hitch and slide came in were all in tacked and looked good. Emailed etrailer and within a few hours they sent were processing the order for the handle. Arrived in 2 days. That's great customer service.
Looks like a received a returned hitch. All my hardware is missing. And still waiting on one box. The sliding rails. Starting off to a bad start.
# 3
Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs
After ordering rails for a fifth wheel that I had in an older truck, I was told the rails I ordered would work with my fifth wheel, however after installing the front rail, the fifth wheel would not work with the rails ordered. I ended up ordering a new fifth wheel plate. That was easier than removing the frame brackets I had already installed. It appears that there was a mis communication between the person I talked to with etrailer. Instead of a 1/2 day install it took a day and a half plus wait time for the fifth wheel to get to my address. However once installed it appears to be good.
The hitch worked great. Reason for the 2 stars is the package got delayed twice in transit and I had to reschedule the pickup of my fifth wheel. When I also received the package the main crossmember bar was bent at the mounting point. Luckily I was able to bend it back but UPS needs to get there act together.
# 4
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 13,000 lbs
Wow, where to begin. I can't imagine towing a 5th wheel trailer in a shorter bed truck without an autoslide setup. After the initial install I noted on the 2nd(?) trip a clunking noise during acceleration after a stop - a couple emails back and forth with Demco support, as well as a quick phone call, and it was all sorted out (user error) with no further issues - Thank you Demco! I tow a short & light Jayco 5th wheel with a 1/2 ton shortbed and having the ability to drive, turn, and park the camper without having to get out of the truck to manually engage or disengage a slide on the hitch has made for much more relaxing weekends away. The Hijacker autoslide gives PLENTY of space between the camper and cab and I've never had to worry, but I did my homework and ran the numbers well before I purchased my hitch so I wasn't surprised. I would say the only downside for me would be the weight and bulkiness of the hitch. Not having the means to easily remove and store it between trips, the hitch is forced to live in the bed of the truck right now, but I did know about the weight going into the purchase. All in all, for the peace of mind the Demco autoslide gives me, I'd spend the money all over again.
# 5
Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
I purchased both the Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - C16120, and Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4 - RP58093 for my F350 SD 4X4 Crew Cab Long Bed. I'm pulling a 30' Retro 5th. Wheel and at times I pull my tandem axle UTV Trailer (Double Trailers) . I already had the rails installed in my truck, this fit right in and I used the new Pins and Lock Plates for securing to truck. I have pulled all over from South Dakota and the Northwest. The Hitch has performed Flawlessly. No bucking, nor clunking. Very quiet and smooth ride. I would recommend this set up to anyone for convenience of Hook up and Disconnect, Excellent towing, quiet, and the security of the lock pins. I use Disc locks to prevent access for bolt cutters.
I was fully expecting a hitch in excess of 100 pounds to show up in a destroyed box. This did not. They had taken the Time and effort to cover the box with an additional layer of cardboard and it must have had a million staples in it. It was almost comical, you will need a crowbar or large screwdriver to get it open. However, when I did finally get the package open I found a perfectly un scratched hitch with no missing parts. I have not pulled with the hitch yet but , it does look like it is going to perform great. I'm using this in a 2006 ram 2500 4x4 short bed pulling a 2015 forest river Salem and it allows 91 degrees of turning due to the clipped corners on the front cap of the trailer. I will be curious to see how long the rubber isolators last before needing replaced and if they are readily available. Also the curt sticker on the hitch was peeling off when I took it out of the box, would be nice to get that replaced.
# 6
Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs
We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.
After receiving the kit i saw another one on the shelf at a local store. I noticed the one on the shelf had a steel ball cup mounted to it. Mine did not have that part. I called andersen and asked if the ball cup was available for purchase seperately. They told me no need to purchase bevause they will ship me one for free! Later on, i towed my trailer to a camp site and upon arrival i could not get the release pin to open to drop the trailer while we stayed in it. I called andersen and described the problem i had, they shipped a whole new block and cable assembly for free!! I am ver pleased with the product and also impressed with the level of customer service!
# 7
B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
From the start,the folks at etrailer were very courteous and helpful. I called many times during the decision making process and everyone was always right there to help. When I finally decided to purchase the B&W 18K Patriot w/slider Bailey was there to help with the order. She explained the free freight shipping and it was a done deal. It arrived 1 day earlier than stated, as soon as I opened the cartons it was in fact the good ol' American made quality I was accustomed to growing up. I proceeded to install on the B&W rails I purchased and installed locally on my 2022 F250 Lariat/ Tremor.I had a small hick- up with the install and etrailer gave me B&W's # as they like to handle issues themselves. Stephanie at B&W was just as courteous. Overall a very pleasant experience. The Patriot was basically plug and play. I then connected my 2021 Grand Design 303RLS Reflection and rolled down yhe road. What a smooth and quiet ride, loved it! I would definitely recommend etrailer and their products. Thank you all that helped.
So far so good. Hitch appears to be good quality. It was easy to install after installing the mounting kit. I haven't used it yet so I can't comment on how it handles when pulling a camper.
# 8
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
Demco auto slide hitch works very well with my crew cab short bed Ram. Fits under my tonneau cover nicely. Trouble free thus far. Had to purchase a Demco plate for the camper to make the Rhino box hitch work. etrailer personnel were great in helping ensure I had the right products and kept me well informed of shipping dates.
My wife and I are full-time RVers, and have used this slider hitch from the get-go while traveling around seeing the country over the past year. We are happy with our purchase, which has proven to be both easy to hook up, adjust, and functions well, as advertised. The only matter I think you may want to address are the thick plastic removable maintenance access covers which tend to bow, and the areas around the attachment holes have melted, in the hot weather. Perhaps instead using a light metal for the covers would be better solution. We are very happy overall with this hitch, and plan to keep it . Thank you.
# 9
B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
Product is very well made. Glad I went with B and W Patriot Hitch. Once the bed rails were installed the rest was a breeze. Now it's time to get a 5th wheel and hit the open road. etrailer, my go-to website.
Great product and you have to appreciate made in America with American steel! It arrived in good shape in only three days. I ordered on Sunday and shipped the same night. etrailer is great company to do business with!
# 10
Demco Recon 5th Wheel Trailer Hitch - Single Jaw - Above Bed - 21,000 lbs
The truck that got the install is a 2002 Ford F350 Super Duty 7.3 L Diesel dually. The Demco Recon 5th wheel hitch (DM8550043) looks like a well made, heavy duty hitch. All the welds are precise and well done. I like the single wrap around jaw with the real thick bar that backs that up. The handle that pulls out to unlock the jaw moves with ease and locks in the out position when the jaw opens. When the king pin comes in contact with the back of jaw, the jaw wraps around the king pin, the handle closes, you put in the safety pin and your ready to go RVing. I chose the Husky Custom Rails and installation kit (HT31405-686) for my install. The reason I chose these rails over the ones that etrailer had matched up for the hitch is, I had previously installed a set of Airlift Airbags and I didn't want the rail install to interfere with the airbags. It was a good choice, there was no interference at all. If I had not had the bags, I would have chose the rails and install kit that require no drilling. Drilling the holes went very fast and easy, it was torking the rear bolts down that was very difficult. There was not enough room to get a wrench of any kind around the nut. I wound up using a set of vise grips on the nut while a friend of mine torked the bolt slowly from above. All and all I'm happy with the product and I'll give another review in a year.
Excellent product and customer service was outstanding. I just bought the product so I haven’t towed with it yet but after many many years of towing with other fifth wheel hitches, I can tell this is going to be an huge improvement!
# 11
Reese M5 5th Wheel Trailer Hitch - Single Jaw - 20,000 lbs
Tried to install this on a 2001 Chevy Silverado 3500, dual rear wheel, long bed, 4x4, diesel engine truck. The clamp style mounting simply does not work. The ONLY way I can see this working is by drilling added holes in the frame of the truck at the front end of the side plates. This is because of a bend in the frame at the clamp location. Also at this location the frame is boxed in and any bolt holes will be hidden. Bolts would have to fished in with bolt wires.
I am very pleased with my purchase of the Reese M5, a major improvement over my old receiver. Great service from etrailer as well.
# 12
Reese 5th Wheel Trailer Hitch w/ Round Tube Slider - Dual Jaw - 16,000 lbs
GREAT GREAT GREAT EXPERIENCE AND EVERYTHING THAT GOES WITH THIS WEB SITE.....PRODUCT TO PRICING TO SERVICE.....
Excellent quality products from Reese along with great service and pricing from e-trailer. I did run into some availability issues from the manufacturer with my initial order but Kelsey informed me quickly so we could modify my order. My order was shipped very promptly as promised. Thank you Kelsey for the amazing customer service!
# 13
B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 18,000 lbs
This 5th wheel has exceeded all my expectations. It’s worked flawlessly for thousands of miles and many different type of 5th wheels trailers. Not a peep, B&W FTW!!
So far this has been a great hitch. Takes up a lot less space than the massive auto slider hitch that I had previously, and have had no problem with any sharp turns so far. It is also much easier to handle by myself taking it out of the truck. The only thing I’ve had some problems with is getting the handle lock pin out once I’m ready to disconnect. To solve, I’ve started wedging the flat part of my crowbar under the head of the pin and tapping it with a rubber mallet from underneath.
# 14
Curt Q24 5th Wheel Trailer Hitch - Dual Jaw - 24,000 lbs
Truly happy with this product and can't wait to go to work! etrailer sent me everything I requested and the installer had no problems. Everything was packed well in shipping with no problems.
2005 Dodge Quad Cab Dully , Cedar Creek 36 ckts 16k very nice hitch , shipped relay fast 3 days to east coast, easy to install : had rails from old hitch, it did come a LITTLE scratched up from shipping . one thing i wish it had more height / it does sit lower than old hitch buy 1 inch. haven't tried pulling yet / will up date latter . hope it pulls as good as it looks. now no problem for bigger trailer, i hope! maybe a toy hauler?
# 15
Curt Q20 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
This product has worked perfect for me using with my 2012 Wildcat Sterling 5th wheel. Customer service is the best at etrailer.com. Just love doing business with them!
I bought a new trailer recently that weighs 16k and I just didn't feel secure using my Reese pro series 16k to Haul with. So I started looking at various hitches. I've had 3 other fifth wheel hitches in the past. All of them have been 15 and 16k models. What I never liked was the latching system. I've even had a trailer come out of the hitch due to a poor latching hook up. There wasn't an good way to lock the hitch. Some of it was my fault and some was a poor design. When I saw the Curt Q20 had a latch on the handle and also was color coded I was hooked. This hitch satisfied my want list. It arrived 4 days after I ordered it and like other comments I've read it was full of heavy duty staples. It was double packaged. There had to be over 50 staples. It was defiantly packaged securely. After dimantaling the packing I finally got to the hitch. There were a few scratches on the hitch from all the staples but a bit of black touch up paint took care of that. After all the hitch is going to be used and get scrached by me anyways. Four bolts and it was together. It fit perfictly it my existing rails. By the way it's heavier than my other hitches. I wound be apprehensive to pull my new trailer. If your looking for a great hitch at a great price you can't go wrong.
# 16
Curt PowerRide 5th Wheel Trailer Hitch - Dual Jaw - 30,000 lbs
I would give this hitch 5 stars but it was damaged when I got it. The handle was apparently dented when it was shipped so I had the choice of either sending sending back a 125 pound hitch or banging out a dent in the handle and getting the damn thing installed.
# 17
Curt A20 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.
Hitch slid into existing rails after a very minor adjustment. Took my son and I about 25 minutes to assemble, torgue bolts and adjust rails in the bed of my truck. we have used it twice already and camper did not bang and pop like it did on old worn out receiver. The ordering process was also very smooth. Kelsey took the time to explain the differences in the hitches before I made my decision! I Would recommend both etrailer and this hitch if you are looking to change out!
# 18
Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs
Great Hitch, very happy with this unit. Have pulled the 18K lb fifth wheel over 25K miles (Florida to Idaho, back to Florida and now Alaska). We have covered many rough roads and challenging situations, without problems and have never had a bad couple. The hitch indicator on front of head gives a clear indication of latching condition, and the latch handle has a locking pin for added protection. This pin is the only issue I have had, which can be trapped under the slide plate if your truck is at an angle (beyond about 35 deg) from the rv. I make it a point to pull this pin prior to backing if I am the least bit concerned. This is a great hitch! Excellent quality and it's made here in America.
This is very well built and operates great. Once I got the first rail positioned and mounted, everything else was very easy. The R20 slider came in a single box and was very heavy. The packaging is not suitable for the weight. As others have also reported, the package was completely demolished when it arrived. Thankfully , all the part’s made it okay and nothing was damaged. I love the product.
# 19
Curt CrossWing Lightweight 5th Wheel Trailer Hitch - 20K
I am a new 5th wheel owner, who is also a 52yr old female, so I wanted/needed something that I could understand and easy to take out on my own. I just picked up my 5th wheel and my older 2005 dodge 2500 (8' bed) truck was a hard to find a good fit. I completely recommend this hitch. It has enough adjustments for my truck to tow my 5th wheel level and never once did I have to worry about the truck bed or my back window as this keeps everything up and away. To hook it up was just as easy as I could see everything just like the video shows. Very happy with this purchase.
I recently switched to the Crosswing from a Curt Q16 slider hitch. I loved the Q16 other than the weight of it. My loaded trailer weight is around 11,500 pounds. The Crosswing is a very stout hitch, and is extremely easy to hitch and unhitch, even at slight angles. While towing, I have noticed that it is quieter than the Q16 and chucking was nearly eliminated. I have to make a fairly tight turn in my Cul-de-sac, especially if there are cars parked on the street which I always slid the Q16 back while turning. I was worried about this but had no problem making the turn. The truck and trailer were close to a 90 degree angle and I still had over 6 inches between the cab and the front cap (2019 Silverado 2500HD short bed). I would definitely recommend this hitch.
# 20
Curt Q25 5th Wheel Trailer Hitch - Dual Jaw - 25,000 lbs
I have ran a cheap competitor hitch for several years. A manufacturing defect (welded pivot pin) caused the hitch to fail and resulted in 18000$ damage to my truck and trailer. I chose the Curt 25000# hitch after much research and found it to be very well made and clearly shows when it is properly coupled. It is quiet and operates with minimal klunking and chunking going down the road. Overall I am very pleased.
Mounted this hitch on my flatbed 3500 Ram and the hitch works flawlessly. Pull 44' tri-axle weighing in at 23,000# with ease. Very easy to use and understand, very easy to maintain.
What our customers are saying:
"These arrived yesterday and are EXACTLY what I was looking for. Thanks for the excellent service!"