Best 2009 Scion xB Trailer Hitch Ball Mounts

Just as advertised, with lightning-fast delivery!

Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.

I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.

What can you say about a good piece of hardware. As for service, it was prompt and accurate!

Just as advertised, with lightning-fast delivery!

The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.

I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.

Looks great, high quality all the way.

Look and quality of the mount is awesome. Beefy in size as well. If using on my particular application, removal of rear diffuser is necessary. If they had extended it another inch it woulda been perfect. 2015 Audi a3 tdi. Wouldn’t let me add a third pic but it’s a finger tip space between the ball and bumper with diffuser removed.

Click to Enlarge

Click to Enlarge

It's great, looks good on my 2006 Scion XB. Gives the trailer hitch tongue good ground clearance since my trailer hitch is lower than most regular small cars, I wish I had bought it earlier. It's cheap and of good quality and makes my car look professional and ready for work hauling whatever.

Perfect drawbar for my lowered Scion XB !!!!

Just as advertised, with lightning-fast delivery!

The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.

Just as advertised, with lightning-fast delivery!

Works great every time I use it

I used this on a 2014 Ford Fusion with a Reese receiver hitch made for my vehicle. Either the neck of the drop hitch is not long enough to get the ball a few inches away from the vehicle or the Reese receiver hitch sits too far under the vehicle.

Click to Enlarge

Untried as of yet but looks like a quality product. It's difficult to provide an accurate review of a product one just received, but I was very impressed at how quickly my order arrived (days before the expected arrival date), as well as the ease of ordering, the price, and the follow up.

Looks great, high quality all the way.

Perfect for my Honda Fit as it has a low carriage, the Euro shape gave me a few extra inches to tow a small trailer across the country from Oregon to North Carolina with no issues.

Just as advertised, with lightning-fast delivery!

The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.

Looks great, high quality all the way.

My order got messed up several times. From USPS lost in shipping, wrong part ordered, wrong amount ordered (my fault), wrong part number (printed on label from manufacturer) etc... In the end etrailer managed to make it right!

Just as advertised, with lightning-fast delivery!

The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.

I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.

What can you say about a good piece of hardware. As for service, it was prompt and accurate!

This drawbar is totally awesome. It saved my trip. The original drawbar was too short for my trailer to clear the chrome accessory on the bottom of the rear of my 2005 goldwing. This product is expensive but well worth the purchase price. It has the perfect angle, length, and clearance Thanks a million!!!

Click to Enlarge

Click to Enlarge

Works great. I used it make my own 2inch receiver because they didnt exist. But I have gotten a lot of use out of it with zero issues.

Click to Enlarge

Just as advertised, with lightning-fast delivery!

The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.

Just as advertised, with lightning-fast delivery!

The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.

Looks great, high quality all the way.

Very nice product! Appears like the European models. That is what I was looking to obtain. Will be used for show on my 1957 Triumph TR3.

Just as advertised, with lightning-fast delivery!

The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.

I purchased this to replace a Fastway Flash E Series Ball mount that I purchased and returned from another online seller that did not provide enough clearance from my rear bumper in the rise position. My vehicle really needed the extra 5/8ths of an inch of length on the shank of the Rapid Hitch. Clearance was not a problem in the drop position; but with a receiver that's 18-inches off the ground, I need to use the rise position more frequently than many. The other thing I noticed is that this ball mount is feels more substantial than the one from Fastway. In use, I prefer this to the Andersen EZ hitch I had been borrowing. It looks really cool. It has 5 adjustment positions rather than four and bit more adjustability in either direction. Plus, it still fits in easily in the storage area underneath the floor of my SUV. And did I say it looks really cool. I hated to put grease on the ball before I went to hook up the trailer. Also, I plan to get the lock set. It's looks great on my SUV and seems likely to disappear overnight and look great on someone else's vehicle.

Click to Enlarge

What do i like about this hitch…i tow trailers requiring both size balls andmits easy to flip this around and adjust tow height. Its lightweight and easy to take on and off when needed. The built in locks keep the hitch on my truck. I like it and recommend it.