# 1
Pollak 7 Pole to 4 Way Connector Adapter
I purchased the 7-way cord and the adapter to extend the connection from the bumper to my extended hitch connection. The ready made molded cord made it easy to assemble the extension cord. Works as advertised.
# 2
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End
Heavy duty spring lock will keep the cord where it belongs. Easy install.
Great service, shipment made timely
# 3
Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
Can be a little tricky to get the wires clamped in the back of the plug but once installed on the wire, works as it should, and good quality
on time delivery
# 4
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket - Metal - Vehicle End
Always a good product at Etrailer.com and informative write up and videos
Just what I needed. ETRAILER Rocks !!!!!
# 5
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
Easy to wire up and I prefer a metal case versus’ any plastic type. I also have the metal receptacle on my Jeep Wrangler.
Great service, shipment made timely
# 6
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!
# 7
Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
Installed: 9/12/2013 Jeep Wrangler Unlimited Installation of the plug was a quick and easy. The existing Warrior hitch has a tab on the side for a trailer wiring socket. Drill a new hole on the installation bracket (comes with the trailer connector) so the bracket on the hitch matches bracket on the trailer connector. Done deal. This is the only trailer connector I found which has the 7, 5 and 4 connector options. Flexibility is always a good idea when you are borrowing someone else trailer or renting.
the perfect plug for mt Wrangler tj
# 8
RoadMaster 6-Wire Trailer Connector - Vehicle End
Great product and thanks to etrailer.com for the excellent videos detailing how to install the Demco Stay-In-Play Duo braking system. As a result of watching all of the available videos, I learned that there where a couple of different ways to install the system in our Jeep Wranglers. The first installation I did was in our 2019 Wrangler and that was super easy following the one video on your website. The second installation of the system was not as easy because our 2021 Wrangler has a manual transmission and required having to drill a hole in the firewall/floor board to run the wiring and vacuum tube from the passenger compartment to the engine area. If etrailer.com ever has an installation on a Jeep Wrangler with a manual transmission to perform, hopefully they will video tape that installation to guide customers with Jeeps with manual transmissions. I think etrailer.com's idea of mounting the control box on the fuse box is by far the cleanest and easiest way to install the Demco braking system. I also followed etrailer.com's videos for installing the brake light system and the base plate on both our Wranglers and could not be happier with them. Thanks etrailer for all you offer.
Worked great on my 2019 wrangler JL , very easy to install
# 9
Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
Well I wasn't able to use this as there was no good place to install on my car without it practically dragging. Not a product problem at all. I tried to return and customer service was fast and super helpful... unfortunately return shipping would eat up any refund. So.. I get to keep it. good quality and product. Very happy with it and wish I could use it. Will keep it for sometime in the future when of course I will need it.
I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.
# 10
Pollak Heavy-Duty, 4-Pole, Round Pin Socket, Concealed Terminals - Chrome - Vehicle End
Product arrived on time and as described. I used this for setting up our 2014 Wrangler Unlimited Sahara for a flat tow. Mounting hole spacing @ 2" o/c didn't match our Blue Ox 1126 draw bar so I fabricated my own intermediate bracket, polished it to aircraft tooling standards, then lacquered it before final assembly. I think the finished product came out nice.
Wiring harness and flat tow bracket to be able to tow our new Wrangler behind our motorhome. Product arrived on time and everyone was most pleasent to deal with. had the bracket installed by the dealre we bought the Wrangler from as part of that deal and then did the wiring ourselves. Pretty weasy thanks to the excellent video provided by etrailer and it took us rookies about 3 hours to complete. we are very happy with the service and product. Thanks to all. Regards,
# 11
Adapter 7 Pole to 4 Pole with Tester and Cover
Love the test option on this
# 12
Adapter 7-Pole to 6-Pole - Universal
We had been having trouble with our other adapters, no brakes or intermittent brakes. This adapter fits better than any of the others ever have, great connection and is holding tight. I will be picking up some more of these. The only downside to me was they came on the value shipping which is rather delayed for us and I would rather pay to get it here more quickly. I was needing it and it was several days getting here. We ship a lot and I know shipping directly with USPS goes faster than that and is not expensive.
Added the gooseneck trailer plug in bed and I wanted to be compatible with new and old style plugs. Adapor worked great.
# 13
RoadMaster 4-Wire Connector - Vehicle End
We just finished a makeover of our 1995 boat trailer. New bunks, sanded and painted but the best part of the project was the new LED lights from your company. They are so much brighter than the old incandescent bulbs that you really do feel safer driving down the road. We pulled the 20 year old wire out and replaced with new and used the 3M scotch loks to tie in. We were not sure the new style grommets would fit the old holes in the frame but they fit great. Your customer service was great, alerting me to a backordered reflector but recommended a replacement that worked fine. Patrick set up a Q&A page for me since I had questions about the best way to protect connections with dielectric grease, heat shrink and tape. Your website is one of the best with ease of navigation, complete pictures, great selection and thorough info, dimensions, etc. You guys really have your act together and also offer great value. I would not hesitate to purchase again and will recommend you when I can. I have attached a couple of pictures. Thanks for all your help. Wayne N.
Easy to install and works great.
# 14
Hopkins Endurance 6-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
This product was exactly what I needed to complete the wiring connections between the RV and Jeep Wrangler. Comes with easy instructions and mounting hardware.
appears to be of good quality. Will have a chance to install next week
# 15
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Exposed Terminals w/ Rubber Boot -Vehicle End
No surprises...It works.
Great quality
# 16
Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way
My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors. I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all. I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.
I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!
# 17
RoadMaster 6-Wire Connectors - Trailer and Vehicle Ends
This was easy to install looks great and works excellent. have had on issues with this product my trailer lights are always working and keeping me safe.
Installed a Blue Ox Base Plate kit on a 2015 Cadillac SRX. The base plate arrived promptly and was well packaged considering its weight. Watched the videos etrailer provides and used them as a step by step video guide. The videos were a big help. Installation is not too difficult if you're mechanically inclined. Had someone help with the installation but one person can perform the installation. I think the base plate is well engineered and everything fit as it should. Love the fact the installation is so well hidden. We have about 400 miles on the installation and have had no issues. Thanks to etrailer for a great price, great service, and great product support.
# 18
Pollak Heavy-Duty, 7-Pole, Round Pin Trailer Wiring Socket - Vehicle End
Not using on a trailer, but making disconnect harness for quick attach snowblower to loader arm. Connection cord is 7 pin tractor trailer tether, Worked well.
Product is high quality & works great! Can't beat etrailer
# 19
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Metal - Trailer End
Fits HD Pollak Connector where other brands do not.
Great place for any trailer needs. They alway gave what I want at a good price and fast shipping.
# 20
Hopkins Endurance Metal Trailer Connector - 7-Pole RV Style - Trailer End
I am enclosing 2 photos of trailer connector I purchased from etrailer. I have a 1995 Dutchman popup trailer. It had a 6 way round connector which would not fit my 2010 F150. By using your trailer connector diagrams, I was able to determine Dutchman was using white for the ground, blue for brakes, black for battery, brown for right turn/brake, red for left turn/brake, and green for tail lights. I replaced the 6 way with your 7 way connector.
Quality built product. This connector seems to take less effort to plug in to the 7-flat socket than others that I have installed. Metal housing provides great rigidity. I appreciate that they include the clip to stow the connector when not in use. If I could improve on it, I would prefer the manufacturer find a way to design the inside to be less obstructive to the 7 wires that have to pass through the middle. I use heavily insulated 7-wire harness, and had a difficult time squeezing everything in to the provided space. All said and done, very happy with the product and I do play on purchasing again next time I need another. I would recommend this to any professional installer. My application is 5 different trailers that include surge and electric brake assemblies in a fresh water marine environment on multiple types of vehicles. This produced is plugged and unplugged almost every day.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"