# 1
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
The forged trailer ball mount was heavy duty good. It is very solid and wont worry about any overload issues with this. Thanks
good product
# 2
Curt Forged Ball Mount for 2-1/2" Hitches - 1/2" Rise - 2" Drop - 20,000 lbs
I've used etrailer on numerous times and generally avoid these reviews, but they are a very solid good helpful organization to deal with. This is a small order compared to 3 years of past orders. Save yourself some time and trouble and just buy from them. You'll be pleased at the service. Jack
I've used etrailer on numerous times and generally avoid these reviews, but they are a very solid good helpful organization to deal with. This is a small order compared to 3 years of past orders. Save yourself some time and trouble and just buy from them. You'll be pleased at the service.
# 3
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K
Great product from a wonderful supplier.
Top notch super heavy duty solid Class V 18000# 2 1/2" hitch with 5" drop. Has some weight, but easy to heft with recessed sides. Married this with a 2 5/16" Brophy raw hitch ball. This is overkill for a 7,000# GVWR trailer being pulled frequently by a 2014 Chevy Silverado 3500HD 4X4 Crew dually with 2.5" stock receiver. Has also occasionally pulled several 6,000# wagons to the elevator. Have no major complaints, but there is a slight variant in size of about 1/16" mounted in the 2.5" receiver so there is very light feel when pulling empty. The 5" drop seems to work the best. This is the second hitch purchased for quick change out. Couldn't be more satisfied.
# 4
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 3/4" Rise, 2" Drop - 18,000 lbs
product was great and delivered on time
well over the hitch is very well made. The hitch itself fit great all holes lined up fine.The only problem the flat round washers were to small for the bolts supplied and you should supply washers for the bracket that mounts under the bumper because the holes on the hitch are pretty big , its possible for the lock washer to seat crooked. A trip to the hardware store fixed the issues. Overall were very happy with the hitch.
# 5
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
excellent replacement for chevys rusted hitch
The forged trailer ball mount was heavy duty good. It is very solid and wont worry about any overload issues with this. Thanks
# 6
Reese Ball Mount - 3-1/2" Rise, 5" Drop - 10" Long - 18,000 lbs
Great product from a wonderful supplier.
Top notch super heavy duty solid Class V 18000# 2 1/2" hitch with 5" drop. Has some weight, but easy to heft with recessed sides. Married this with a 2 5/16" Brophy raw hitch ball. This is overkill for a 7,000# GVWR trailer being pulled frequently by a 2014 Chevy Silverado 3500HD 4X4 Crew dually with 2.5" stock receiver. Has also occasionally pulled several 6,000# wagons to the elevator. Have no major complaints, but there is a slight variant in size of about 1/16" mounted in the 2.5" receiver so there is very light feel when pulling empty. The 5" drop seems to work the best. This is the second hitch purchased for quick change out. Couldn't be more satisfied.
# 7
Curt Forged Ball Mount for 2-1/2" Hitches - 2-1/2" Rise - 4" Drop - 20,000 lbs
I've used etrailer on numerous times and generally avoid these reviews, but they are a very solid good helpful organization to deal with. This is a small order compared to 3 years of past orders. Save yourself some time and trouble and just buy from them. You'll be pleased at the service. Jack
I've used etrailer on numerous times and generally avoid these reviews, but they are a very solid good helpful organization to deal with. This is a small order compared to 3 years of past orders. Save yourself some time and trouble and just buy from them. You'll be pleased at the service.
# 8
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 3" Rise, 4" Drop - 18,000 lbs
well over the hitch is very well made. The hitch itself fit great all holes lined up fine.The only problem the flat round washers were to small for the bolts supplied and you should supply washers for the bracket that mounts under the bumper because the holes on the hitch are pretty big , its possible for the lock washer to seat crooked. A trip to the hardware store fixed the issues. Overall were very happy with the hitch.
Works great and very durable. I have a Silverado with a 6 inch lift on 35's and the 6 inch drop works perfect for my 28 foot boat on a triple axle extreme trailer and the 10 inch drop works perfectly for my dads double axle trailer. I had the aluminum 10 inch adjustable hitch if you guys are familiar with that and it works great but I bought The rock tamers mudflap system and the neck that goes into the receiver is too short. I had to buy new hitches for the rock tamers mudflaps system and I knew my drop size already and these ones are working perfectly.
# 9
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
20 lbs of receiver hitch probably not going to have a problem with it.
The forged trailer ball mount was heavy duty good. It is very solid and wont worry about any overload issues with this. Thanks
# 10
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
well over the hitch is very well made. The hitch itself fit great all holes lined up fine.The only problem the flat round washers were to small for the bolts supplied and you should supply washers for the bracket that mounts under the bumper because the holes on the hitch are pretty big , its possible for the lock washer to seat crooked. A trip to the hardware store fixed the issues. Overall were very happy with the hitch.
Works great and very durable. I have a Silverado with a 6 inch lift on 35's and the 6 inch drop works perfect for my 28 foot boat on a triple axle extreme trailer and the 10 inch drop works perfectly for my dads double axle trailer. I had the aluminum 10 inch adjustable hitch if you guys are familiar with that and it works great but I bought The rock tamers mudflap system and the neck that goes into the receiver is too short. I had to buy new hitches for the rock tamers mudflaps system and I knew my drop size already and these ones are working perfectly.
# 11
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
I've used etrailer on numerous times and generally avoid these reviews, but they are a very solid good helpful organization to deal with. This is a small order compared to 3 years of past orders. Save yourself some time and trouble and just buy from them. You'll be pleased at the service. Jack
I've used etrailer on numerous times and generally avoid these reviews, but they are a very solid good helpful organization to deal with. This is a small order compared to 3 years of past orders. Save yourself some time and trouble and just buy from them. You'll be pleased at the service.
# 12
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 4-3/4" Rise, 6" Drop - 18,000 lbs
well over the hitch is very well made. The hitch itself fit great all holes lined up fine.The only problem the flat round washers were to small for the bolts supplied and you should supply washers for the bracket that mounts under the bumper because the holes on the hitch are pretty big , its possible for the lock washer to seat crooked. A trip to the hardware store fixed the issues. Overall were very happy with the hitch.
Works great and very durable. I have a Silverado with a 6 inch lift on 35's and the 6 inch drop works perfect for my 28 foot boat on a triple axle extreme trailer and the 10 inch drop works perfectly for my dads double axle trailer. I had the aluminum 10 inch adjustable hitch if you guys are familiar with that and it works great but I bought The rock tamers mudflap system and the neck that goes into the receiver is too short. I had to buy new hitches for the rock tamers mudflaps system and I knew my drop size already and these ones are working perfectly.
What our customers are saying:
"You folks are fast. Thank you very much."