# 1
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
It has been over a year since I had rebuilt my trailers using parts purchased at etrailer. This is the first time that I have been able to put any real miles on the unit and with 800+ miles the lights and everything performed flawlessly. I will not think twice of making additional purchases from etrailer.
Parts arrived on time and suspension is working good. etrailer was cheaper than local sources on the suspension components.
# 2
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
Good quality, combining these with the bronze bushings made for a smooth, quiet, and durable ride on my early 80's equipment trailer.
Nice fit, Looks well built.
# 3
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
I chose this particular kit mainly for the 9/16" u-bolts. I could have easily used the 1/2" kit but it was a nice upgrade and not much difference in cost. These u-bolts and plates fit my car trailer perfectly without any modifications. Everything in product description was just what it said when I received them. Shipping was faster than I expected!
Looks like good quality. The U-bolts are bigger than what is on the trailer and that is good!
# 4
Dexter Trailer Springs Over-Under Conversion Kit
I have a 99 cummins with 35s and a 5 inch lift. My 5th wheel now sits level and I even raised the king pin up another hole. I'd definitely buy this again
Kit arrived missing all but 2 of the ubolt nuts. No biggie, had some on hand. Went to install ubolts and they were too short. Bought new ones. Went to use top plate and it was too narrow. Had to make new ones. Only thing I used was the axle perches... Which you can buy anywhere. Total waste of money. Make your own kit like I ended up doing.
# 5
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!
When I ordered my kit from etrailer to replace the double-eye leaf springs on my 1970 Shasta Trailer, I decided to save a few bucks and get the bolts at my local hardware store. Big mistake! You wouldn't think a simple 3 inch bolt would be hard to find in your local hardware store. But in fact, i checked five hardware stores and none of them had this particular bolt. What a waste of time! I should have learned my lesson by now, and just give all my parts business to etrailer.com. I have probably spent more than $1000 in the past several months refurbishing our 1970 Shasta. Totally satisfied with the selection at etrailer, and the service is second to none!
# 6
Dexter Trailer Springs Over-Under Conversion Kit
I ordered this kit to keep my 19' Coleman tent trailer from dragging the rear bumper on direveway approaches. Install was super simple, finished everything in about 40 minutes. I gained about 5 inches of added height. I chose to not tack weld the perches in case the next owner doesn't like the height. No problems with a few thousand miles of rough roads. Highly recommended.
It's not rocket science.... Very easy to install. I out these on a 20' big Tex trailer and did very small welds incase I decided to sell I can put it back to the original height. It raised the dovetail in the back 5 inches and couldn't be happier as we take a couple of rzrs in the mountains and it was tough getting this trailer in places without dragging it. I would recommend this kit
# 7
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
Perfect replacement. Definitely worth money.
# 8
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
Worked great, no issues.
# 9
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Parts arrived in a timely manner and were as advertised...Great service from this company.
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
# 10
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
I am very happy with the service and knowledge of the customer service. Everything has been shipped out promptly and arrived in great condition. I would recommend them to anyone looking for trailer parts. Thanks for the help.
# 11
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Good quality delivered quick
Parts are a 5, delivery options questionable.Can't delivery 10 pounds of metal in a paper mailer. Was tore open on the bottom. I run a mailing business and I can tell you its not that much more expensive to use a box.
# 12
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Well hello, I dont do many reviews but I will have to say that the people at etrailer are very nice and very easy to deal with and they know there business for sure , I havent installed my parts yet and they arrived dead on time and I knew every step the parts made along the way to me . So far I am very pleased and that is hard to do with me as 99 percent of the time nothing is ever the way suppliers say it going to be until now with etrailer , very nice job guys and thank you and I will be installing everything this weekend and will do another review and will have some pics along the way, And by the way thank ou for keeping the prices affordable for us out here in the field trying to keep our equipment rolling and safe , with your prices no reason to be able to do just that , again great job guys .
# 13
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
Installed these along with new springs on my 20ft car trailer and so far they've held up great to hauling 8000lb+ trucks and anything else I decide to throw on there.
Fit well with no adjustments
# 14
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
After a year and 20,000 miles, this was one of the best upgrades in towing and ride on my 42' fifth wheel. It took out a lot of the small bumps that would open cabinet's and knock things over in the shelves. Another great advantage is the bronze bushings are greasable and do not squeak like the OEM plastic, the OEM bushings had around 3000 miles and we're already worn through, the bronze if kept greased will probably last the life of the trailer.
You can tell a company that you want to do business with when something goes wrong. They did the right thing and upgraded the shipping so we can make our vacation spot on time when these slipped through shipping some how. Anyways they have me as a customer for life now! THANK YOU Jennifer and George. You are the reason I am now a happy camper!!!
# 15
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 16
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
Perfect replacement. Easy installation took about hr to install each side.
# 17
Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
Perfect placement. Grease fitting great. Definitely worth the money
# 18
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks
Great to get these high quality suspension parts to finish the axle modification on my travel trailer. The thick gauge of the metal makes it easy to weld the parts in place. I appreciate that they were available without having to buy a entire axle tube assembly!
# 19
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
During my yearly maintenance i found a issue with 1 of my spring equilizers and all of my bushings were worn out "got my moneys worth out of them" etrailer sent this kit and it only took me 2 hrs to install and get back on the road
The wet shackle kit was purchased for a Neo enclosed snowmobile trailer that worn out shackles and bolts in the suspension. Removal of the old hardware went fine and the clean up of the springs also. The assy of the new shackles and hardware was relatively easy. Initial greasing of the new wet shackle set up was difficult but ultimately I got all zerks to take grease except one of the pins in one of the shackle plates with two pins. A couple of 300 mile trips and all took grease easily except that one pin and it still will not take grease. Its almost as if there is not a hole for the grease to travel thru.
# 20
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
Bought a used car trailer in need of repair, sand blasted and painted the trailer. While working on it more and more things needed to be replaced. This hanger kit was a great match. Thank you etrailer.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"