# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Didn't realize that the unit came with a pin and clip so I ordered one. Now I have 2. No problem. Good product and it was delivered 2 days earlier than anticipated!
Like the other items I ordered this arrived 2 days early and fit perfectly and is exactly what I needed for my 98 Explorer for towing a car trailer.....
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Hitch works great. Needed the 6" drop for my 2005 Ford Explorer with stock 1-1/4" hitch to tow my utility trailer.
Exactly what I needed to tow my boat trailer. So easy to find on web site and a very quick delivery time. Very pleased with the entire purchase process and quality of product.
# 3
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Worked perfectly with my standard Ford Explorer hitch 2003. Service at etrailer was great, and hitch arrived in timely manner.
perfect for my needs - great price; great service
# 4
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Product arrived ahead of schedule due to upgraded shipping at no extra cost. Order was accurate and appears to be high-quality. Obviously, I won't know for sure until I take it out with a trailer a few times, but I am glad to find a product that can tow my car and carry my bike rack at the same time!
They give you the exact fit as described. And fast delivery
# 5
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Hitch works great. Needed the 6" drop for my 2005 Ford Explorer with stock 1-1/4" hitch to tow my utility trailer.
Great deal on the Curt Class III ball mount with 2" ball. etrailer.com was great to work with. Ordered Sunday and delivered Wednesday. I'll definitely use etrailer.com again!
# 6
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Quality product, well made, but design could be improved. The square bar that slides into the receiver on the car/truck is too long, resulting in the hitch ball being about a foot behind the bumper, at least it is on 2004 Ford Explorer. It becomes a trip, knee, or hinge hazard if not removed after towing.
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
# 7
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 8
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs
Great product. Just as I needed. Very prompt delivery
Fast and efficient
# 9
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Product came just as described and fit perfectly for what I needed. I used it for a hitch mounted on the frame of the rear of my fifth wheel rv. Hitch was mounted at the very end of the I-beam style frame i had on rv but I wasn't comfortable with the length of a standard size ball mount receiver. It needed to be longer. This product was exactly what I needed to complete my rv hitch setup. Thanks e-trailer !
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
# 10
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Hitch works great. Needed the 6" drop for my 2005 Ford Explorer with stock 1-1/4" hitch to tow my utility trailer.
Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.
# 11
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 12
Curt Class III Ball Mount with 2-5/16" Ball - 2" Rise or 4" Drop - 7,500 lbs
Hitch works great. Needed the 6" drop for my 2005 Ford Explorer with stock 1-1/4" hitch to tow my utility trailer.
Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.
# 13
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Hitch works great. Needed the 6" drop for my 2005 Ford Explorer with stock 1-1/4" hitch to tow my utility trailer.
Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.
# 14
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
It looks like it will work OK. It fits and appears to be the right height for my utility trailer, but I did not get a pin to hold the unit into my receiver - just the product. The picture showed a pin and a clasp was included.
The Convert-A-Ball is made in USA, appears to be high quality and just what I was looking for. The Draw Bar however was made in China The Convert-A-Ball appears to be high quality, made in USA and just what I was looking for. I needed a Draw-Bar to fit 1 1/4" receiver and with 1" shank hole, but nearest I could find was this Draw-Bar with 3/4" hole, so will have to drill out this one. Also was made in China, which I try to avoid although the quality appears to be good. Wish I had known that the Draw-Bar came with its own Pin & Clip so I wouldn't have ordered that separately, so now I have 2. This why I gave only 4 stars. Otherwise am happy with the order.
# 15
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
Received order the next day. Haven’t used item yet so no performance review available.
Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.
# 16
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 17
Curt Pintle Hook with 2" Ball - for 2" Hitches - 10,000 lbs/16,000 lbs
This is an excellent hook. And it looks killer. etrailers exceptional service and quality is beyond compare.
Looks great
What our customers are saying:
"You folks are fast. Thank you very much."