Most Popular 7 Round - Blade for 1998 Jeep Cherokee

This hooked right in with the rest of the system. One of the easiest parts of the install.

Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.

Click to Enlarge

I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).

Couldn't get things working on my Jeep XJ. Ordered this set up and everything worked.

Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture

Exactly what I needed...Top Quality

Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.

I installed this connector on my travel trailer. The original connector had become loose and would fall out if not retained by the tab on the bottom of the connector. After a year of usage The Pollack connector still snaps into place and fits tight. Good product.

ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.

Plugs in easily, shows that pins are producing voltage, and locks in place using the spring loaded door to the 7-pin.

This is my second order with etrailer. Both experiences with your company have been very positive. The knowledge and friendliness -along with following up on orders and satisfaction have been much appreciated. Brittany, the customer representative, is a huge asset to etrailer.

Exactly as described and what I needed. Delivered quickly.

We had been having trouble with our other adapters, no brakes or intermittent brakes. This adapter fits better than any of the others ever have, great connection and is holding tight. I will be picking up some more of these. The only downside to me was they came on the value shipping which is rather delayed for us and I would rather pay to get it here more quickly. I was needing it and it was several days getting here. We ship a lot and I know shipping directly with USPS goes faster than that and is not expensive.

Added the gooseneck trailer plug in bed and I wanted to be compatible with new and old style plugs. Adapor worked great.

Well I wasn't able to use this as there was no good place to install on my car without it practically dragging. Not a product problem at all. I tried to return and customer service was fast and super helpful... unfortunately return shipping would eat up any refund. So.. I get to keep it. good quality and product. Very happy with it and wish I could use it. Will keep it for sometime in the future when of course I will need it.

I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.

Needed a longer connector for my vehicles. Both have 7 way plugs, but I use a trailer with a 4 flat plug. The coiled adapter works great for both of the vehicles. Very good product if you need some extra length and the fact that it has the coils makes for a better appearance.

I ordered all the parts required to safely flat tow out 2017 Jeep Cherokee Trailhawk from etrailer.com. The only part they didn't have was the Mopar Flat Tow Enhancement kit Jeep requires to flat tow this model. Ordering from them was great, the website is easy to use and I was able to locate all the pieces compatible with my specific vehicle. The expert recommendations help my decision choosing the right parts. I ordered from etrailer even though I found some of the parts on other websites a little cheaper. I chose to pay a little more because of all the effort etrailer has put into installation videos and guides. I was very pleasantly surprised to learn from etrailer that they have a price match guarantee! So my equipment consisted of the following Mopar Flat Tow Enhancement Kit (from Jeep) Roadmaster Battery Charge Line Kit for Towed Vehicles Mighty Cord 7-Way RV Style Trailer Connector - Trailer End WesBarg 7-Way, RV-Style Connector w/ 6' Long Coiled Cable Trailer End Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End Hopkins Custom Tail Light Wiring Kit for Towed Vehicles SMI Stay-IN-Play DUO Supplemental Braking System Roadmaster Brake-Lite Relay Kit for Towed Vehicles Blue Ox Alpha Tow Bar - Motor Home Mount - 6,500 lbs Blue Ox Base Plate Kit - Removable Arms Blue Ox Tow Bar Cover - Aladdin, Aventa LX, Aventa II The installation videos are great but not all inclusive. Take the time to read the instructions that come with the parts. This is a major project, I took about 30 hrs over a full week but as you'll see in the pictures I took s few extra steps to make a cleaner look. Some of those extra steps: The base plate install requires the bumper be modified cutting off a flange on each side, I spray painted this to prevent corrosion. In the install video of the baseplate on the drivers side they use an extra quick link (not included) to run the safety cable around the wiper fluid reservoir. I took the time to remove it and run the safety cable behind it. I didn't want our nice new vehicle to look like it can be towed so I played the brake away switch and 7 way trailer plug behind the license plate, so when not being towed our vehicle looks great! Some things to be aware of. The Brake air cylinder that mounts to the brake pedal with four bolts may need longer bolts, it did on our Jeep. Spend the money for weather tight heat shrink crimp fittings. The Hopkins wire harness was about 1.5 feet short to get to my plug location. Buy extra zip ties, electrical tape and split loom. I recommend reading all the various installation manuals and watching all the videos because the various components integrate together and if you install one at a time you'll be doing a bunch of extra work. The brake light relay is a real pain in the butt, not because of the hardware but because of the location of the brake light switch which is very hard to get to. Overall I am very happy with the products and how the installation looks. We haven't towed it yet but do not expect any problems.

As the video indicates, ensure that your vehicle wiring is the same as the 7 blade definitions. Mine was not. Had to determine what color wire connections to use for a 4 flat adapter use on a dolly.

My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors. I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all. I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fast shipping and looks to be just what I was needing. Thanks

Promising product with the terrible customer service. Order arrived damaged so the customer service initially promised the full replacement which never happened. After the delayed communication the customer service decided to process it under the warranty claim which never happened. Never recommend to do business with this company again.

I was expecting blade connectors as shown in the pictures and video and that is the main reason I purchased this item. Instead it had screw connectors.

Works great, easy to install

I ordered this wiring kit for a 2003 Dodge Ram 1500 I recently acquired. The Ram was not tow ready but did have a factory 4-way. I also ordered hitch #13333. The wiring kit is very high quality and was easy to install. The 7-way fit perfectly where the factory 7-way would have gone. I'm using a Tekonsha Prodigy RF wireless brake controller so the blue lead was not needed but I left some extra should that change. Thanks etrailer!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Cathy T was a FANTASTIC help in finding the exact right product that we needed!!! It's sometimes difficult to understand what we need because what we may call an "extension cable," may actually be labeled as a "wiring adapter" or "trailer connector." She was very patient and thorough as she found us the precise product for us. She was also knowledgeable about Jayco trailers, knowing their uniqueness, which also helped her in finding us the right product. And this product is absolutely the exact item we needed!! We luv it cuz it's easily visible for us, as well as law enforcement on the road!! Thank you for your expertise and great selection which provided us with what we need!!

makes for a faster hook-up from Truck to trailer. What is outstanding is the plug lights, when connection is made.

I upgraded my trailer from hydraulic to electric brakes and rewired everything to neaten and freshen up things. Its a nice piece. I recommend.

The overall quality of the cable is impressive