Summer Starts Here - Save up to 70%
# 1
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Coming in at about 45 pounds, the D900 Curt Multi-Ball Adjustable Ball Mount is a BEAST! I purchased for use with my '08 Expedition towing either a small utility trailer w/ 1 7/8" ball or my DooLittle Bullitt cargo trailer w/ 2" ball. I needed 5 inches of drop (at least) for both. This is just about the only economical mount in which to accomplish this. Most if not all two ball mounts are 2" and 2 5/16" balls. Many reviews comment on the length that this mount sticks out and initially that was a concern of mine. Please see the Q&A of the D900 product page to address those issues. Short story: A hollow/tubular extension shank of (about or greater)15" reduces vehicle hitch capacity by 50%. The D900 shank and other components are SOLID steel. No reduced capacity. Specifically in my case; this extra length will allow me some personal maneuvering room when hooked up to the DooLittle and raising the lift gate of my Expedition. Clearance between raised lift gate and cargo trailer was about two inches using my old shank, and I should about double that. The anti-rattle tightening bolt is a nice touch. This is my first Etrailer purchase, but not my last.
VERY sturdy piece of hardware here. I was worried it might be a little flimsy piece of metal. Not so, this is a substantial hunk of engineering and I feel safe putting anything on the back of my Expedition! Fully adjustable and easy to install, just like it says!
# 2
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 3
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
# 4
B&W Tow & Stow Pintle Hook with 2" Ball - 2" Hitches - 10,000 lbs/16,000 lbs
Great product and very helpful folks to talk to. I’ve ordered from etrailer many times and it won’t be my last.
This hitch is a very handy addition to my toolbox! I work for a county road department, and I’m always pulling different trailers to and from job sites. I can switch from a 2 5/16” ball hitch, to a pintle hitch with the flip of a lever! Thanks B and W!
# 5
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
I tried twice to get this hitch and ball from [online vendor]. Twice the shipment was lost and I had to get a refund. Shipment from etrailer is right the first time and arrived quickly. Plus, since the ball is already torqued on the ball mount, I don't need to by a large socket.
We’ve already installed it and hitched up the horse trailer. Works great for my needs. Half the weight of the much heavier weight distribution system we had been using (and will continue to use for Interstate travel). Hook up was fast and easy.
# 6
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
# 7
Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 5-1/2" Drop, 6-1/2" Rise
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards
# 8
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 10,000 lbs
I did my research before ordering. I know exactly what I need and want. My boat trailer tongue weight is 750lbs so I went with the Gen-Y Torsion Flex 2" Hitch - 7.5" Drop/Rise 10k. (Works Best with 400-1,000lbs tongue weight). Also got the BEST price due to their 110% Price Match Guarantee.
It was well packaged shipping was great received it within a week installation was easy weighing only 73 pounds. It does affect the center back up sensors on a 2022 , 3500 long bed ram pick up.
# 9
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Works great. With all the adjustments we can get our trailers to haul level now. Quality looks really good and it has the 2 size trailer hitch balls which makes it way more convenient.
VERY HAPPY, BUT STARTED TO SEE SOME RUST ON THE HITCH BALL AND ONLY USED TWO TIMES. THE VERSABILITY OF THE PRODUCT IS GREAT. OTHER THAN THE SMALL AMOUNT OF RUST ON THE BALL ITSELF, IM VERY SATISFY AND WILL BUY FOR MY OTHER TRUCKS.
# 10
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
This is one solid hitch. Bought the hitch to pull about 5000 lbs. there's no doubt in my mind that it can handle it.
Ordering was extremely easy and etrailer representative very helpful. Chedi also sent me videos that explained perfectly how to install. I don't usually leave reviews, but these guys deserve a good one. Customer service and products delivered were impressive.
# 11
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
It did the trick, although it is starting to rust.
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
# 12
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 8" Drop, 8" Rise - 18K
Looks amazing, came as advertised with quick shipping. Super easy to adjust for different balls and heights. No more swapping out receivers when I go from 2" to 2-5/8 tongues. Would have gotten 5 stars if a hitch pin was included, especailly at this price point. Interested to see how it holds up over time.
It’s been a good hitch so far. I have no complaints. The 2.5 inch Rock Tamer mount just fits on my 2022 Superdutys factory receiver. I was real happy about that.
# 13
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
Awesome hitch, I use it on a 2003 Ford F-350 and 2005 Ford Expedition, so much nicer just carrying one hitch for any trailer I tow compared to having all different hitches to deal with and lug around
B&W just makes a great product no matter what it is. This is no different. I have two other tow and stow and love the ease of changing heights and ball configurations.
# 14
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Chrome
B&W just makes a great product no matter what it is. This is no different. I have two other tow and stow and love the ease of changing heights and ball configurations.
Awesome hitch, I use it on a 2003 Ford F-350 and 2005 Ford Expedition, so much nicer just carrying one hitch for any trailer I tow compared to having all different hitches to deal with and lug around
# 15
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Chrome
B&W just makes a great product no matter what it is. This is no different. I have two other tow and stow and love the ease of changing heights and ball configurations.
Awesome hitch, I use it on a 2003 Ford F-350 and 2005 Ford Expedition, so much nicer just carrying one hitch for any trailer I tow compared to having all different hitches to deal with and lug around
# 16
Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 3-1/2" Drop
Very nice and as expected from E-trailer. Thank you!!!
This hitch is extremely well made and makes it very easy to go from towing a lightweight storage trailer with my SUV and heavy towing with my 3/4 ton pickup. Switching ball sizes is a breeze. I highly recommend this hitch
What our customers are saying:
"Thank you! I enjoyed shopping your site."