# 1
EZ Heavy Duty Adjustable Hitch with Combo Ball - 8" Drop/Rise - 14,000 lbs
Just did ~500miles with about 5k worth of car plus trailer over hill and dale. Works great. No detectable wobbling, but pins are easy to get through holes (not too tight or misaligned). Heavy, but not like, completely unwieldy.
This Hitch does the job perfectly for all my trailers keeping in the upright position and did not notice any excessive rattle..
# 2
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
I installed this on my 2015 Honda Accord for the purpose of pulling my small aluminum fishing boat and trailer. Works great!
Drawbar looks great and will be using in next two days. Thanks!
# 3
Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 5-1/2" Drop, 6-1/2" Rise
Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards
Have done about 5k with this hitch, just once with a 4500lb camper but mostly with a 3000lb cargo trailer. The former in a highly raised position and the latter in the absolute bottom position. The hitch has worn very well and shows no signs of excess wear, save for the surface of the 2" ball, but it's not concerning. On a Jeep Grand Cherokee with a stock suspension, this seems to give the right balance of range of adjustment without dropping so low in the lower configuration as to scrape through dips, though it can still be done on very sharp dips with the hitch on the lowest setting. Overall, very pleased with it and love that it's lighter than steel and won't rust.
# 4
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
It is heavy duty and well-built. I am not disappointed at all and I get comments everyone smile from people who are used to traveling overseas asking where I got the European style hitch from. The only downside is the lack of interchangeability in the size of the ball itself but I don’t think that’s a big deal because I set it up for what I need it for and keep a vehicle vehicle for longer periods of time.
Solid, heavy as heck. Bought this model because 1) I only have 1 lightweight trailer (Malone xtralight, also purchased from etrailer at the same time) and it’s light weight. 2) I am stuffing this into an adaptor also bought from etrailer to further stuff into a receiver also purchased from etrailer. 3) All this is on the back of my 2018 Subaru Outback. Beings that it’s a Subaru it’s not going to be used to drag a huge or heavy trailer. I’ll repeat this part in my review of the adapter, buy probably from etrailer, a receiver lock that is sleeved, to be both 1/22 and 5/8 and long. That way if you don’t want this sticking way out the back (shin killer) you can use 1 lock and go all the way through receiver/ adapter/ and this ball mount. Otherwise buy you’ll need 2 locks 1 for receiver to adapter 5/8 and a second 1/22 to go through adapter into this unit. A side benefit is it’s just different. It’s not an everyday boring looking ball mount, it’s heavy duty so why not.
# 5
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
I would have given you guys 5 stars if it were not for the way the items were packaged. The ball mount and break controller were loose in a medium sized box with out any packing in between. The box for the break controller was smashed. I don't see any visual damage on the break controller its self but, I also haven't wired it in. It would be a good idea to separate these items with some kind of packing materiel so they don't slam around in the box. Other than that the products arrived as advertised.
Complete hitch, nothing missing, no chips in paint or damage. Was well wrapped for shipping.
# 6
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 7
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
I would have given you guys 5 stars if it were not for the way the items were packaged. The ball mount and break controller were loose in a medium sized box with out any packing in between. The box for the break controller was smashed. I don't see any visual damage on the break controller its self but, I also haven't wired it in. It would be a good idea to separate these items with some kind of packing materiel so they don't slam around in the box. Other than that the products arrived as advertised.
Complete hitch, nothing missing, no chips in paint or damage. Was well wrapped for shipping.
# 8
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 9
Flash Secure 2-Ball Mount w/ Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
Love the design with no locking through pins to worry about. Only reason for three stars is I received the product with cosmetic damage from being dropped.
Works great. The locking pin feels like it could be a bit wider but otherwise I love it. I’m a novice at towing so the adjustability of the height has helped make sure the towing has been optimized at all times.
# 10
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
Good fit, well made, worked well on first use, ball attached easily, was the reciever I was looking for.
Exactly as etrailer described it on their site. One Drawtite 2923 ballmount. It is a superiorly made product which I have used for hauling my boat around the USA and Canada for many years. I decided to buy a second one so when friends and family borrow one of my trailers I need not take mine off my Pathfinder. etrailer prices were excellent and their shipping very fair priced and quick. I will not hesitate to buy all my trailering needs from them.
# 11
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 12
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 13
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.
Super convenient and well worth the money. All 3 of my trailers have a different ball size, and this is a breeze compared to constantly swapping tow hitches. Keep the pins well lubricated, and they slide well maintain their appearance.
# 14
Buyers Products Tri-Ball Hitch Solid Shank with Pintle Hook And Chrome Balls
Rusts easily. Chrome is non existent.
Great service!
# 15
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Works great. With all the adjustments we can get our trailers to haul level now. Quality looks really good and it has the 2 size trailer hitch balls which makes it way more convenient.
VERY HAPPY, BUT STARTED TO SEE SOME RUST ON THE HITCH BALL AND ONLY USED TWO TIMES. THE VERSABILITY OF THE PRODUCT IS GREAT. OTHER THAN THE SMALL AMOUNT OF RUST ON THE BALL ITSELF, IM VERY SATISFY AND WILL BUY FOR MY OTHER TRUCKS.
# 16
Curt Pintle Hook with 2" Ball - for 2" Hitches - 10,000 lbs/16,000 lbs
This is an excellent hook. And it looks killer. etrailers exceptional service and quality is beyond compare.
Looks great
# 17
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Complete hitch, nothing missing, no chips in paint or damage. Was well wrapped for shipping.
ETRAILER PRODUCTS ARE THE BEST.
# 18
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
This ball mount is a beast. It may be a little overkill for my little trailer, but better safe than sorry. Hooking a small camper to a Nissan Pathfinder required an 8" drop and this fit the bill perfectly. Extremely sturdy unit and the shipping was fast. Ordered it Friday and received it the following Tuesday. Not impressive until you add the fact that I'm In Calgary AB and it came from MO. That's fast. I've ordered many things from etrailer and the service has always been exceptional.
I use this hitch when I pull my horse trailer to make the stop/start transitions as smooth as possible for the horses in the back. It works great. I also love that its a category IV hitch. Really heavy duty. My truck sits pretty high, and the amount of drop - 8" is perfect. I never worry about hitch failure travelling with my horses - they're a heavy load, and any failure would be a disaster. E Trailer provided excellent service, and their shipping to Canada was prompt and hassle free. Way to go guys, keep up the great work!
# 19
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Exactly as etrailer described it on their site. One Drawtite 2923 ballmount. It is a superiorly made product which I have used for hauling my boat around the USA and Canada for many years. I decided to buy a second one so when friends and family borrow one of my trailers I need not take mine off my Pathfinder. etrailer prices were excellent and their shipping very fair priced and quick. I will not hesitate to buy all my trailering needs from them.
I was very happy with the product and the service.
# 20
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
The ball mount was a complete failure even after a lengthy discussion on the phone. I wanted a ball mount that would accept the rocker ball and anti-sway bar. The bar sent to me can't be used this way. An email and phone message to the sales person I ordered with, got no response.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."