Most Popular Steel Shank - Matte Black for 1984 Dodge Ram Pickup

Just received ball mount yesterday. This ball mount is heavy duty with a quality feel. Fit and finish are impressive with durable coatings and tight tolerances. Allows me to tow my motorcycle trailer and cargo trailer with one ball mount (different ball sizes and heights for each trailer). I was worried that the 7” drop might be too low for my 2016 Ram 1500 with stock air suspension, but since installed, it looks good and I’m no longer concerned with possibly bottoming out during daily driving. Added the silencer pad upon initial install and haven’t heard any rattling. So far I’m overall impressed with this product.

Click to Enlarge

Click to Enlarge

Absolutely love this hitch!! I have a Ram 2500 Cummins Diesel so the 7" drop works great!! I towed my boat to the lake with it 2 days after revieving it and it worked flawlessly!! Last but not least....the stow away option is wonderful because my truck barely fits into my garage let alone having a hitch sticking out as well. So this was the only way to go unless I wanted to remove my hitch after every use!! Couldn't be happier and would definately recommend!!

This hitch is awesome! Love that it swivels to a stowaway mode... saves the shins and when used with a receiver lock, the stowaway section cannot be stolen! ??

Well worth the money. Best hitch ever.

This hitch setup is top notch! Very heavy duty. I went with this setup over cheaper similar options because those other 3 piece options that are similar just seemed clunky and held together by a lot pins with lose tolerances (IE recipe for wiggling and rattling), not to mention multiple stress points. This B&W unit is sleek and solid, no wiggling around, and tucks up out of the way nicely when not in use...which is more handy than you would think! We are using this on a 2017 Dodge Ram 1500 Big Horn with factory air suspension.

Click to Enlarge

Click to Enlarge

I love this hitch! My new Dodge sits quite a bit higher than my old truck so none of my old hitches work. I was able to replace all of my old hitches with this one. It's good and sturdy, you don't have to worry about a ball nut backing off and getting loose like I have had happen with others. And it's so simple to change between ball sizes and trailer heights, I wish I had one of these years ago!

Fits perfectly in the rise position on our ‘84 Dodge B250 Ram van that has a class III Draw-Tite hitch. There is about 1 1/2” clearance between the vertical brace on the front of the ball mount, and the vehicle bumper. Be sure to watch the product video. It gives you all of the measurements you need to see if it will fit your vehicle.

Very stout and solid. Fits a ball with a 2 3/4" or 2 5/8" shanks perfectly, so there isn't too much thread hanging out below waiting to get damaged. It slips into the Ram hitch receiver without much slop, but I haven't towed with it yet.

Fits perfectly in the rise position on our ‘84 Dodge B250 Ram van that has a class III Draw-Tite hitch. There is about 1 1/2” clearance between the vertical brace on the front of the ball mount, and the vehicle bumper. Be sure to watch the product video. It gives you all of the measurements you need to see if it will fit your vehicle.

Excellent product and easy install on my Ram Express. I have been pulling a 33' travel trailer with no issues. You can't go wrong with this product.

Great service, awesome hitch!

Top notch product made in USA, enough said!

Fits perfectly in the rise position on our ‘84 Dodge B250 Ram van that has a class III Draw-Tite hitch. There is about 1 1/2” clearance between the vertical brace on the front of the ball mount, and the vehicle bumper. Be sure to watch the product video. It gives you all of the measurements you need to see if it will fit your vehicle.

Just like the description. This this is Heavy duty for sure.

Click to Enlarge

Fits perfectly in the rise position on our ‘84 Dodge B250 Ram van that has a class III Draw-Tite hitch. There is about 1 1/2” clearance between the vertical brace on the front of the ball mount, and the vehicle bumper. Be sure to watch the product video. It gives you all of the measurements you need to see if it will fit your vehicle.

Very stout and solid. Fits a ball with a 2 3/4" or 2 5/8" shanks perfectly, so there isn't too much thread hanging out below waiting to get damaged. It slips into the Ram hitch receiver without much slop, but I haven't towed with it yet.

Fits perfectly in the rise position on our ‘84 Dodge B250 Ram van that has a class III Draw-Tite hitch. There is about 1 1/2” clearance between the vertical brace on the front of the ball mount, and the vehicle bumper. Be sure to watch the product video. It gives you all of the measurements you need to see if it will fit your vehicle.

The hitch choice didn't work for my 2016 Ram 2500. The trailers that I needed to tow had a fixed trailer jack. If I lowered my tailgate, due to it's big lip design, it would hit the jack. I resorted to a hitch that was longer and was adjustable.

it's nice to drive down the road with out the klunking you get with a regular ball mount

I have used these on my Ram 3500 for about 13 years and got this one for our new Ram 1500. It takes the jerking out of towing.