1996 Chevrolet C/K Series Pickup 8 Foot Bed Truck Bed Rail Caps

Hey Ron, thanks for reaching out! The Putco Classic Chrome Decorative Pillar Posts #P402678FD are for an F-150 so we will get that updated. For your 2024 Ford F-250 Super Duty you'll want to go with the Putco Classic…

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height…

Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…

I spoke with TruXedo and they told me that the width of the TS Rails for TruXedo Elevate Rack System #TH75FR is 1 1/2".

Hey Thomas, so B and W does have a fifth wheel hitch that fits the Reese above bed rails you have in the bed of your truck but the Companion that you mentioned does not as it only fits into B and W Turnoverball gooseneck hitches. So instead what…

Yes, you could definitely use some rubber grommets along with the Hopkins EasyLift Truck Bed Tailgate Lift Assist #74211 to help prevent rust and corrosion or metal on metal.

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

The Westin E-Series Step Bars, part #23-2310 will fit your 2003 Dodge Ram 3500 Dually. Just to be absolutely certain, I've confirmed the fit with my Westin representative.

I attached a diagram and instructions on where and how often to grease the Demco Hijacker part #DM6077 that you have. It's recommended that you use white lithium grease like the part #L11354 for a cartridge for a grease…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed…

When the option is available, I always recommend going with a radial tire versus a bias-ply. The ride quality will be noticeably smoother and more stable. Radial tires do a better job shedding heat, and since excessive heat is the number one reason…