Hey David, we have the MORryde Snap In RV TV wall mount part # MR25ZR that is a swiveling/locking RV TV mount like you are looking for. view full answer...
If you plan on running the TV off of the trailer battery (12v DC) then I recommend the Jensen LED 12V RV TV # JEN46VR. If you're planning on running the TV off of shore power (AC) then I recommend the Jensen LED 110V RV TV # JE2417. Both of these TV's only weigh 9lbs and have a 100 mm x 100 mm mounting pattern.
As for the TV mount, I recommend the MORryde Wall RV TV Mount # MR23ZR. This full motion TV mount gives you the ability to adjust your TV for the best viewing angle. view full answer...
Hello Ann, thanks for reaching out. We do have extendable TV mounts that can swing, swivel and tilt, and that will work with a 24" TV. Take a look at the following:
- MORryde RV TV Wall Mount - Swing/Swivel/Tilt - 25 lb Capacity - Steel # MR65ZR
This has a 25 lb capacity so it can work with most any 24" RV TV. It will work with the standard 75mm, 100mm or 200mm mounting patterns.
The video I linked below will show this mount in more detail.
I have also provided a link that shows our... view full answer...
Hello Ernie, that is an interesting question. The MORryde RV TV Mount # MR22ZR is designed to be mounted on a ceiling so that the TV hangs folds and hangs down. That said, if your application calls for it to be mounted on a floor, your certainly can as long as the TV is less than 35 lbs. view full answer...
Hello Harold, thanks for reaching out. We offer several different TV mounts so we may have one that will work for you. There is no way to look up your travel trailer to know exactly which one you will need though. RV manufacturers just don't get that specific in their online literature.
I have provided a link below that will show you our full selection of RV TV mounts.
The MORryde Portable RV TV Wall Mount # MR98DR is a popular mount that works for most RV TVs. It has a 50 lb capacity.... view full answer...
The MORryde Wall RV TV Mount # MR23ZR has dimensions of 5.25" W x 5.83" T for the plate that attaches to the wall.
The MORryde Wall RV TV Mount # MR65ZR has dimensions of 10" W x 5.87" T for the plate that attaches to the wall.
Either one of these mounts will work with your Jensen LED RV Smart TV # ASA38VR (JE3221S) which has a 100mm x 100mm VESA mounting pattern. view full answer...
Hello Kent,
Great question. It is not so much the size of the TV, but whether or not your TV has the correct VESA mounting. I attached an image of the VESA Mounting Patterns for the MORryde RV TV Wall Mount - Swivel - 50 lb Capacity - Steel # MR88ZR. I you happed to have the 300mm x 300mm or the 400mm x 400mm you can use the adapter plate VESA Adapter Plate for MORryde RV TV Mounts - 300mm x 300mm or 400mm x 400mm # MR43ZR.
One other thing, is that the TV cannot weigh more than 50 pounds.
We... view full answer...
Hey Renee, thanks for reaching out!
The MORryde Countertop RV TV Mount # MR53ZR isn't designed for the plate to be reversed to the other side of the upright, but you can accomplish this goal using the MORryde Countertop RV TV Mount # MR42ZR instead. view full answer...
The compatibility of the MORryde Ceiling RV TV Mount # MR24RR is going to depend on the mounting pattern of the TV and weight. This TV mount fits a 75mm x 75mm or 100mm x 100mm mounting pattern and can hold up to 25lbs. I recommend measuring the mounting holes on the back of your 40" Samsung TV and seeing what the mounting pattern is to determine fitment. view full answer...
The MORryde Ceiling RV TV Mount # MR24RR is rated to for a maximum weight of 25lbs and has a mounting pattern of 75mm x 75mm or 100mm x 100mm. This means there is no specific size maximum as long as it weighs less than 25lbs and has a VESA mounting pattern.
We do not currently carry a large selection of TV's but the Jensen LED RV TV 32" # JTV32DC weighs 13lbs and fits a 100mm x 100mm mounting pattern, so it would be a great option to go with the # MR24RR. view full answer...
Hey Curtis, you came to the right place. The MORryde RV TV Wall Mount item # MR38DR weighs right at 8 lbs when you take out the hardware and shipping material.
Thanks for the kind words about our videos. What brand of tv are you planning on using? view full answer...
I do have TV wall mount options for you though none are specific to any one model of RV. The MORryde Wall RV TV Mount part # MR93ZR is a great option for example and allows you to mount any TV to the wall 50 lbs or under that uses the following standard VESA patterns: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm, or 200mm x 200mm.
If this won't work, I have attached a link with a list of all our tv mount options. view full answer...
The Jensen RV TV part # ASA98VR comes with the standard RV TV VESA mount setup so it would mount to your current bracket. I am not sure what you mean by separate module though. view full answer...
It sounds like you're wondering if the 35-1/2" TV will fit on the MORryde Countertop RV TV Mount # MR62ZR. As long as it has a VESA mount on the back and weighs 50 lbs or less you won't have problem installing the TV on this mount. view full answer...
You're correct, the MORryde Wall RV TV Mount # MR57RR does only have a 20lb capacity. The # MR57RR drops down and has side to side horizontal tilting, but does not have a vertical tilt for the connection point to the TV.
The closest option we carry to what you're looking for is the MORryde Wall RV TV Mount # MR93ZR. This mount has a 50lb weight capacity and can tilt 10.5 degrees. It won't drop down like the # MR57RR, but instead will swing 180 degrees where arm attaches to wall mount... view full answer...
With the MORryde Ceiling RV TV Mount # MR22ZR flipped down the space between the ceiling mounting bracket and center of the tv mounting bracket is approximately 9-1/2". When the flipped up the space between the two points is approximately 7-3/16" view full answer...
The table top stands we have use a 100x200 VESA mounting pattern while your 50" Jensen JE5020 has a 200x400 VESA mounting pattern. For your application you can use a different mount like the MORryde Counter RV TV Mount # MR42ZR or the MORryde Wall RV TV Mount # MR93ZR and then use the Adapter Plates # MR74RR to match the larger mounting pattern you have.
These mounts are a different than the one you asked about because these actually bolt into place instead of just sitting on top of a... view full answer...
Sure thing!
It sounds like what you're looking for is the:
-MORryde Wall RV TV Mount # MR57RR.
This R.V. T.V. mount has a drop down swivel design that will allow you to lift and move your T.V. out of the way to access storage that is behind it.
This mount also includes the needed hardware for installation and has a 20-lbs weight capacity. view full answer...
Go To Results