Yes we do! For your 2022 Nissan Frontier with the 5' bed we recommend the WeatherTech ImpactLiner Custom Truck Bed Mat # WT47EF. The WeatherTech mats are made of a durable, yet flexible thermoplastic material that is 100% custom fitted for your truck. It will to a great job increasing traction and protecting the bed of your truck from scratches and dents. view full answer...
Hi Frank!
If you want the 8' bed of your 2015 Ford F150 completely covered, you are going to want the BedRug Custom Full Truck Bed Liner - Trucks w/ Bare Beds or Spray-In Liners - Carpet # BRQ15LBK. This will cover the bottom, sides, front, and tailgate with a 3/4" durable carpet like liner. One of my buddies has one of these in his Ram and absolutely loves it.
Do you have a tonneau cover you are going to use to further protect the bed? The Access TonnoSport Soft, Roll-Up Tonneau Cover... view full answer...
Yes, it will! The DeeZee Custom-Fit Truck Bed Mat item # DZ87011 will work great and protect your F-350's truck bed with our without a spray in bed liner. This mat is custom fit for the 2022 Ford F-350 with a 6-3/4' bed. We have lots of customers that add bed mats to trucks with spray in liners.
I have linked a picture and an installation video below we did on a 2017 Ford that will show you the DeeZee item # DZ87011 installed on a truck with a bed liner. view full answer...
WeatherTech currently only carries a tailgate liner for a 2022 Nissan Frontier with a 6' bed so the only other option I currently have is the Access Custom Truck Bed Mat # A45BG. This half inch thick carpet easily snaps in and out of place so that you can protect your bed or pull the mat out to clean it. view full answer...
Hey Andrew. The Malone Axis Truck Bed and Roof Load Extender item # MPG907 and the Flint Hill Goods Truck Bed Extender item # FHG89ZR are practically identical. Not sure they would be the best option for 2 kayaks though. They each max out at 48" wide so you'd want to compare this distance to the width of your kayaks at different angles to see if they would fit.
If you run into size issues with the width, I recommend using the Yakima LongArm Truck Bed Load Extender item # Y01149. This... view full answer...
Hey Jeff,
Definitely smart to check and I went ahead and verified directly with TorkLift the correct tie-downs for your 2021 Ram 1500 with a 5-1/2' bed, factory hitch and no boards under your truck bed. The correct fit is the following:
- TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL63DR
The only other thing you will need are turnbuckles, and for that the best option are the TorkLift Locking FastGun Turnbuckles # TLS9526-2-LK.
These are the easiest to use due to their... view full answer...
Hey Elizabeth. There isn't a database or guide to cutting up a ladder rack to fit a truck it wasn't designed for. I don't know what all is different between those two ladder racks other than they fit different trucks. They're custom fit for the following vehicles that have different bed dimensions:
The Adarac Aluminum Series Custom Truck Bed Ladder Rack item # A44EG fits a 2007 - 2021 Toyota Tundra with a 66.7" long x 48.7" wide at the rails bed and has 66" long x 1-1/2" wide crossbars.... view full answer...
The Replacement Tarp # EX1870 fits the Extang Blackmax Tonneau cover 2870 which was the fit for your 1999 Toyota Tacoma with the 6'2" bed. The Tarp # EX31790 you found is for a Classic Platinum tonneau which is a different model tonneau.
We have the Extang Tonno Tonic Protectant Spray # EX1181 which will help condition the vinyl and protect it from the UV rays which dry it out and cause it to shrink and crack. view full answer...
I have a solution for you but the Demco Straight Safety Cables item # DM9523055 are only for flat towing. You can't use safety cables in place of safety chains for an in bed hitch. They're not rated for that, it will void any warranty, and it's against the law.
Instead you will want to use the DeeZee Custom-Fit Truck Bed Mat item # DZ86916. This mat is custom fit for your Ram 3500's 8' bed. You'll need to cut out the holes for the puck system. We have had multiple customers do this with... view full answer...
Hello Emmet, thanks for reaching out. We do have a great option for a soft roll-up cover for the 1995 Chevy C1500 stepside. I recommend the following:
- TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black # TX549101
I’d recommend the TruXedo Lo Pro Soft Roll-up Tonneau Cover because it is a great mix of style and convenience. It has a clean, low-profile look that really complements the truck, and the roll-up design makes it easy to get full bed access when needed. I like that it’s built... view full answer...
Hey David, the first thing you'd need for your 2024 Toyota Tundra 6-1/2 foot bed is a tonneau cover that has T-slots like the RetraxONE XR part # RTX47XR and then with that installed you could use a ladder rack like the Yakima Overhaul HD for tonneau covers part # Y01151-5855 and you'd be set.
The Retrax is very secure and would do a great job securing the cargo in the bed of the truck and the Yakima ladder rack is adjustable in height and also easy to attach bike racks too. view full answer...
Hi Ed; since you're looking at the # BE27UR I'm assuming you want a soft camper shell for your 2017 F-150. For the same design that fits your 6-1/2' bed we have the Bestop Supertop for Truck 2 Collapsible Bed Cover - Black Diamond # BE29UR. The other two options are the # B76305 and # UT94FR.
It may be a little more expensive but I recommend getting the # BE29UR over the others. This bed cover has a 5-year warranty compared to a 1-year warranty which says something about the difference... view full answer...
Hey Mike, thanks for reaching out!
For your application you'll want to go with the Quad-Fold BAKFlip G2 Hard Tonneau Cover # BAK26305 on your 2008 Ford Ranger.
The etrailer Hard Tonneau Cover # e23DR actually doesn't fit your Ranger and we don't have a fit for an '08 Ranger at this point in time.
Even if it did fit, the etrailer cover is a pretty entry-level product so it gets the job done but doesn't look as nice and doesn't operate as smooth. Then when it comes to rain protection;... view full answer...
Hey Gary!
I reached out to Pace Edwards to check on replacement parts, and unfortunately, they let me know that nothing is available for that truck anymore. I wish I had better news. You might still have some luck finding parts secondhand through an online marketplace.
As for similar options, there’s nothing quite like the Jackrabbit that rolls up into a canister. However, we do have a few solid alternatives:
A hard folding cover like part # BAK72601
A soft folding cover like part #... view full answer...
Since you have a 169" canoe I recommend using the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 on your 2018 Nissan Frontier because it will support up to about 130" of the length of your canoe. This leaves you with about 20" of canoe at the front and rear of this ladder rack.
I would imagine that 20" of space at the back of your Frontier would leave you with enough turning room for a travel trailer but if you would rather not have the canoe sticking out at all at the rear you... view full answer...
Hey Mark,
It honestly just comes down to personal preference so you can choose to leave them open or closed based on your needs. Most people tend to either close the jaws and try to lock them so no one can use the hitch or they leave it open and ready to couple to make hooking up the trailer the next time easier. My only advice would be to protect the hitch from the element regardless of whether you leave the jaws open or closed. Whether its a tonneau cover over the bed of the truck,... view full answer...
We have the TorkLift Camper Tie-Downs Front # TLD2142 and Rear # TLD3112 for your 2023 Ram 3500 Crew Cab long bed dually with the factory running boards. You may need the Anchor Relocation Kit # TLA7004 if your slide in camper is less than 90" from the front slide in portion to the rear anchor points. I recommend using the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK to secure your camper in the bed. These have a stainless steel construction for corrosion protection and a black powder... view full answer...
Hey Mike, sorry to hear about your rear window! I wish Thule had a rear window guard/headache rack but at this time they do not have anything. I will say this is first time I've heard of this problem being related to a ladder rack so it's probably not on Thule's radar. view full answer...
Hi Dave,
Firestone has a no-drill mounting bracket # F2530 to mount the air tank from the # F49VV and it's pretty typically to just mount it to the outside of the passenger side frame rail right around where the cab and bed meet. If you have the space you could mount the tank to the hat channel under the bed. Jake made a video on his Ram doing this, which I've attached below, that you can use as a reference if this interests you.
Personally, I'd go with the hat channel mounting if you... view full answer...
Hi Thomas,
Appreciate that info, and we do have the right TorkLift camper tie-downs for your 2023 Ford F-350 with an 8 foot bed and the factory hitch. The correct tie-downs for your truck are the following:
- TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL87DR
The # TL87DR are steel tie-downs like you wanted, the aluminum # TL85SV are also available if you're interested. The only other thing you'll need are turnbuckles. The best option are the TorkLift Locking FastGun Turnbuckles... view full answer...
Go To Results