bing tracking image
reset filter

Expert Answers about Gulf Stream

  • What Furrion Variable Speed Chill Cube do I Need to Replace My Dometic 15K BTU Ducted?
  • Hello Justin, Instead of me going over all the ones that we offer, what is the current AC you will be replacing, and is it ducted or non ducted?
    view full answer...
  • Bearing Kit that Fits Lippert 4,000 lb Trailer Axle of Gulf Stream CSK19
  • Hey Roger, for the Lippert 4,000 lb trailer axle we have found that the bearings used are the same as the 3,500 lb axles so you would just need the part # BK2-100 for a kit that includes the bearings and the seal.
    view full answer...
  • Replacement Leaf Springs for 2020 Gulf Stream Vista Cruiser 19ERD
  • Hey Steven! The etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet # e93SR will be adequate for your 2020 Gulf Stream Vista Cruiser since the Dexter D40 number correlates to a 4,000 lbs hub and drum kit like Dexter Trailer Hub and Drum Assembly for 4,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # K08-426-91. Going any higher will not be beneficial to your suspension and may likely give you a stiffer ride, causing bouncing or sway while...
    view full answer...
  • Recommended Lift Kit for a Dexter 3,500 lbs Torsion Axle
  • Hey James. So long as your Gulfstream Visa 19ERD travel trailer has a square 3,500 lbs Dexter #10 Torflex axle and not a diamond you can use the Torflex Lift Kit item # K71-707-01. The Torflex Lift Kit item # K71-707-01 will raise the suspension 2-5/8". They have a 8" on center mounting bolt pattern if you would like to confirm your have a #10 Torflex axle. Is your axle orientated so it looks like a square or a diamond? You can add this information and any other questions you have where...
    view full answer...
  • Looking For 12v Refrigerator To Replace Dometic DM2672
  • Hello Susan, thanks for reaching out. Yes, we do have a good 12v option for replacing that. Based on the specs I found online, the Dometic DM2672 fridge is a 6 cubic foot unit that measures approximately 54-5/8" tall x 25" wide x 25" deep. We do have a good replacement for this. I recommend the following: - Furrion Arctic RV Refrigerator w/ Freezer - 8 cu ft - 12V - Stainless Steel - Left Opening Doors # FR46GD This fridge measures 53-1/8" tall x 25-3/4" wide x 24-1/4" deep so it should...
    view full answer...
  • Looking for Baby Moon Cover that Could Fit 2021Gulf Stream Vintage Cruiser Model 19CSK
  • Hey Valerie, I would need you to measure your current wheel where the baby moon cover would fit to determine which would fit. For example, the part # AM90086 that you referenced would fit a diameter of 9-1/4 inches. If you can measure what you have and let me know I'll be happy to check and see what we have that might work.
    view full answer...
  • Replacement Voyager Rear Camera for a 2005 Gulf Stream BT Cruiser Motorhome
  • Hey Ralph, thanks for reaching out! Does the Voyager Rear Camera with LED Low Light Assist # VCMS17B look like the mounting bracket and wiring connector will work for your Gulf Stream? I don't have a listing of what came on your motorhome, otherwise I'd be able to confirm on my end. Let me know, if you have something else and I'd be more than happy to help you figure it out!
    view full answer...
  • Can I Rotate the Electric Jack w/ Footplate and 7-Way Plug on the Trailer for Tailgate Clearance?
  • Hello David, Great question. The Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3527-BBX uses the standard 3-bolt A-frame mounting pattern, so you can rotate it for better tailgate clearance. Because that bolt pattern is symmetrical, the holes will still line up if you turn the jack in 120-degree increments. That’s actually a pretty common way to gain a little extra space, especially with trucks that have tighter tailgate clearance. The main thing...
    view full answer...
  • Where Should I Install the Brackets for Mount-n-Lock RV Bumper on My 2015 Gulf Stream Vista Cruiser?
  • Hello Tom, When installing the Mount-n-Lock Heavy-Haul'r Standard Duty Replacement RV Bumper - 4.0" - 500 lbs - Mill # MNT78VR it doesn't really matter where they are installed whether it's high, medium, or low just as long as all 4 bolt holes in the brackets are mounted to the frame, and the weight is distributed. As for the water, being a tube some rainwater will get in unless you cap it off, but I wouldn't suggest doing that as having the holes is a good idea to let it breath in there....
    view full answer...
  • 2018 Ford F150 With Factory Brake Controller Has Weak Signal When Brakes Are Applied
  • Hello Rick. The brake controller uses just one wire to send braking signal to your trailer. So, if the manual override is working fine, I do not suspect an electrical issue. It sounds like the gain setting on your brake controller got turned down somehow. Can you try adjusting the gain setting and changing it to a higher level? Do this and you should see stronger braking like you do with the manual override.
    view full answer...
  • How to Determine if Optronics Clearance Light MCL0030RBB is Right For Trailer
  • Hey Jeff, While we don't have any way to confirm the exact lights on your trailer, I can tell you the SAE is just a type of safety code, and there isn't a 131 with an oval lens. That said, the LED Clearance or Side Marker Trailer Light # MCL0030RBB could still be right for you. To find out, you can just measure the light you have and match it up; the # MCL0030RBB is 3-3/4" long x 1-13/16" tall x 3/8" deep and its mounting holes are 2-11/16" apart on center. If your light has that - or...
    view full answer...
  • Replacement Slide Out Motor For A 2007 Gulfstream Endura
  • Hi Jenny, For a PowerGear slide out motor # 524907 you would need the Replacement Gear Motor Assembly for Lippert Slide-Out # LC27VR that you were already looking at.
    view full answer...
  • Recommended 1/2"-20 60° Conical Cone Lug Nut that's 1-1/2" Long Overall
  • Hey Spring welcome back! The 1/2"-20 Taskmaster Trailer Wheel Lug Nut item # TA66QR has a 1-3/8" overall length. This is a 60° conical cone lug nut and is chrome plated. For a 1-1/2" long 1/2"-20 lug nut, you'll need the Lionshead item # LHLR103. These are sold individually and also have a 60° conical cone. It has a stainless steel cap to prevent corrosion. If you have any additional questions, go ahead and click on the box that says Add Comment and I'll be happy to answer them.
    view full answer...
  • Replacement Leveling Control Panel and Controller for 2009 Gulf Stream Motorhome
  • Hey Joe! I reached out to Lippert and found that the replacement touch pad is the # LC175225 and then for the controller you need # LC53ED. You will also need a new pump wiring harness. The correct one depends on whether or not your pump runs just the leveling system or the leveling system and slide. If it is just the leveling system you need # LC69DX and if it runs the slide with the leveling 365336. We don't carry the 365336 right now but if you find out you need it I would be happy...
    view full answer...
  • Steering Stabilizer And Sway Bars For 2004 Chevy Kodiak 5500 Endura Gulf Stream Motorhome
  • Hey Dan, thanks for reaching out. We can absolutely provide all those parts for your 2004 Chevy Kodiak/Endura Gulf Stream motorhome. Doing all of those at once will make a massive difference in how it rides and handles. Here are all of the exact part numbers you'll need: - Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK5-RSSA - Roadmaster Front Anti-Sway Bar - 1-5/8" Diameter # RM-1109-158 - Roadmaster Rear Anti-Sway Bar - 1-5/8" Diameter...
    view full answer...
  • Suspension Enhancement for a 2004 Gulf Stream Independence 8320
  • Hey Michael, I recommend picking up the SumoSprings Maxim Custom Helper Springs # SSR-181-54-1 for your 2004 Gulf Stream Independence 8320 because you install them and then you don't have to mess with them at all after the installation. They just supply more support as more weight is put on them!
    view full answer...
  • Difference Between MORryde Equalizers For 33" Wheelbase on Tandem Axle Trailer
  • Hi David, The SRE4000 is no longer available and has been replaced by the AllTrek 4000, and there are a couple difference between the AllTrek and CRE3000. First, here are the part numbers for a tandem axle trailer with 33" wheelbase: - MORryde ALLTREK 4000 Shock Absorbing Equalizers # MR89DR - MORryde Rubber Equalizers # MR87ZR The differences between the AllTrek 4000 and the CRE3000 (which is the latter part above) is the longer slot on the AllTrek which gives more suspension travel...
    view full answer...
  • Can Thule T2 Pro XTR Bike Rack Use Hitch Extender
  • Hi there Kay; you can use a hitch extender with the Thule T2 Pro XTR Bike Rack # TH83JV. Keep in mind, the use of an extender like the # e88YR will reduce the capacity of your hitch by 50%. As long as your hitch can still hold the bike rack and bikes with this 50% reduction it won't be a problem. I also recommend grabbing the etrailer Hitch Receiver Lock # e98881 for the extender to keep your bike rack secure.
    view full answer...
  • Dometic 310 Flapper Ball Water Not Staying In
  • Hi John, Appreciate the purchase of the Dometic 310 # DOM37FR; from time to time the ball gets knocked out of place and not seated properly, which is why it's leaking. So what you can try is to push the floor pedal down then reach in to realign the ball; hopefully it will then snap back into place.
    view full answer...
  • Looking for Replacement RV Bathroom Vent Screen
  • Do you know what brand of bathroom vent you have? I attached a link to a page that has all of the vent screens we carry in the meantime for you to check out. You might be able to scroll through them and see if you see the match you need.
    view full answer...