Since there isn't an adapter available to convert the 4-way to a 7-way your best option would be to cut off the 4-way and wire it to a 7-way connector like part # A7WCB. This way your trailer will not require an adapter and everything would work. view full answer...
If you are asking what mounting hardware replacement kit will work for an old Karrite XL Voyager, then you should be able to use the Replacement Hardware Kit for Searsbox Cargo Box, part # TH05603.
Many of these older cargo boxes no longer have dedicated replacement hardware, but many of our customers have had great success with using this mounting kit with their Karrite boxes.
If this wasn't what you were asking, please let me know and I will help you further. view full answer...
I spoke with Lippert Components and was able to cross reference the part numbers you provided to the Lippert PowerGear Slide-Out Motor with Pin Connection and Coupler with Connector # LC29AF. To order this part you'll need to call our customer service department at 1-800-940-8924. view full answer...
There are two different spacer blocks that come with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75774, per the instructions they are 5/8” X 1-1/2” X 2” and 1/4” X 1-1/2” X 2”. That said, they do not specificy a thickness although we do offer these plates but you would have to purchase a hardware kit which has them, the Replacement Hardware Kit for Trailer Hitches part # RHK. view full answer...
While we do not have an exact replacement for the Winnebago tail light 152070-01-000 you may be able to fit the Fusion LED Hardwired Trailer Light # OPT74NR. This is a 4" round light with the similar red an white lens allowing it to act as a tail light, brake light and reverse light similar to your current light. As I see your light fits into a recess you will need to check the dimensions to determine if this light will fit in the opening. If it does not fit please let me know the measurement... view full answer...
I empathize with you because accidents do happen but if grease got on the brake shoes of your Hydraulic Trailer Brake Kit # AKUBRK-35-D to be safe you need to replace the shoes in order to ensure proper braking.
For that you will need two of the Hydraulic Brake Shoe/Lining # BP04-120; this shoe will fit single servo 10" diameter x 2-1/4" wide shoes like your kit has. view full answer...
The Replacement Brake Adjuster Kit for Dexter 12-1/4" Forward Self-Adjusting Brakes # K71-472-00 is definitely designed for hydraulic brakes. It can be easy to assume that hydraulic brakes mean disc brakes, in which case they would be correct. This part, however, is for hydraulic drum brakes.
Although this is slightly different, the brake adjuster for hydraulic drum brakes is located on the assembly at the bottom just like an electric brake assembly. This can be seen on the Dexter Hydraulic... view full answer...
Yes, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan # MA39FR is the correct replacement circuit board for your 8501 model. view full answer...
It does not look like you will be able to use the Tekonsha Prodigy P3 Brake Controller # 90195 with your US Gear tow brake.
I recommend changing over to the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251. This system provides proportional braking to your 2005 Jeep. It is one of the few systems that looks for 2 inputs to confirm that you are braking. It wants to see that your brake lights are activated saying that you have physically pushed the brake pedal and it wants... view full answer...
The Replacement Screen Frame # BVC0573-32 is designed to work with the Ventline Roof Vent model # V2119-601-00. It will work with any of the V2119 model vents. It sounds like you may have a different model of vent fan since it is not fitting correctly. If you are able to provide the model number of your current vent, we can recommend a suitable replacement. view full answer...
For your replacement exterior ladder I recommend the Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black # LA-401BA which is customizable in length. view full answer...
We only have one replacement lens option which is the Replacement Amber Lens for Furrion Vision S Side Marker Light RV Cameras # C-FOS07TAPK-002 which fits on the Furrion Vision S # FCE48TASL, # FCE48TASL-05, and # FCE48TASL-07.
If you find that your 2013 Leisure Travel Van Unity has a different camera system I recommend finding the model number and brand on the camera and I would be happy to help you track down the correct replacement lens. view full answer...
Thank you for providing those measurements. The one that is really going to matter here is the 9" measurement for your bolts, which will be your rough-in measurement. This definitely rules out the 320 which requires 11". Since you said "about," I would make sure to get an accurate measurement. The Dometic 310 Part-Timer # DOM57FR may be able to fit if that is actually 10" instead of 9.
I suspect the measurement is more like 8-1/2" which would make the Dometic 300 Weekender # DOM64FR your... view full answer...
The ZCI Trailer Wiring kit part # 119250KIT that you referenced is a confirmed fit for your 2014 Mercedes GLK350 as it can basically be installed on any vehicle and since it does not require cutting or splicing into the vehicles wiring it would not void any warranties either.
Instead of splicing into the wires the sensors of this kit just clamp around them and sense that voltage is being carried on the wire and that is what is used to signal which trailer wiring circuit needs to activated.... view full answer...
The arms of the Yakima Ridgeback part # Y02458 that you referenced they measure 13-1/2 inches apart measured from outside to outside. This rack typically works well with smaller bike frames but in some cases the easiest solution is to use a bike frame adapter bar like part # UB01 which attaches to the steering stem and seat post to provide a wider, level attachment point. Check out the review video I attached as well. view full answer...
If the key number isn't on the face of the lock, it'll be engraved into the side of the lock core. If the lock is unlocked, you can use the Yakima Control Key # Y8007835 to remove the lock core and get the code number off the side. You'd then order a replacement key, part # Y8772-XXXX with the X's representing the key number on the lock cylinder. For example, if the number on the core was A136, then the replacement key needed would be # Y8772-A136.
If the lock is not unlocked, you'll need... view full answer...
I don't have the color codes, but you should be able to easily determine which wire colors carry which circuits by using a circuit tester like part # PTW2993.
Begin with the turn signals and running lights. Have a helper activate the right turn signal while you test each wire, chances are you'll find that the green wire carries the right turn signal. Activate the left turn, which is typically the yellow wire. Testing should confirm this. The brown wire usually carriers the running lights.
As... view full answer...
Yes, the Roadmaster sway bar part # RM-1209-128 that you referenced is a confirmed fit for your 2016 Mercedes Sprinter 2500 and would work well. view full answer...
We have some suspension enhancements for your motorhome but aside from these parts we don't have any OEM suspension replacement parts so you'll need to reach out to your local RV or vehicle dealer for those parts.
To add some suspension enhancements to your 2016 Winnebago ERA 170 A I recommend the following:
SumoSprings Solo Custom Helper Springs - # SSR-338-54
Roadmaster Rear Anti-Sway Bar - # RM-1209-131
The SumoSprings will help your OEM suspension with up to 1,400 lbs of weight... view full answer...
Based on how you are describing it I believe we do have what you are looking for with the following replacement part for your Thule HideAway awning:
- Replacement Connection Support Arm for Thule HideAway Awnings # TH58VK view full answer...
Go To Results