In order to mount the Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package part # HM11143910 on a 2017 Lexus LX 570 you'll need the Mounting Bracket and Installation Hardware part # PK12711U. If you can' find anywhere to mount this bracket you can purchase the Curt No-Drill Bracket part # C57202 and secure it to the hitch. It may be necessary to bend the bracket as needed. view full answer...
Alcom trailers come in all kinds of sizes and configurations and so you will need to choose the correct brake and hub assemblies for your particular trailer. For example, one style of Alcom tandem axle trailers have 3,500-lb axles with 10 inch brakes. If this describes your trailer then Electric Trailer Brake Kit Item # AKEBRK-35-SA includes left and right hand assemblies and works with 3,500-lbs axles could fit your needs. Likewise, a replacement for your trailer hubs and drums common... view full answer...
Hey Blair, if you were going to install the Firestone air bag kit part # F4164 upside down then cutting the hole in the top of the spring seat would not be necessary but this is not the recommended way to do this so I would lean on recommending you do it the way the instructions describe. Is there a reason you want to install it upside down? view full answer...
Hello Peter, thanks for reaching out. The Curt Front Hitch # 31198 you mentioned is for the 2008-2018 Toyota Land Cruiser, 2008-2021 Toyota Sequoia and 2007-2021 Toyota Tundra. This has not been tested on a Lexus LX 570, so we cannot confirm fitment. The frame should be similar but it looks like the front bumper is different so that would be a problem for the front hitch. I have included dimensions of the # 31198 front hitch for you below, if you want to compare this to your vehicle. In... view full answer...
Hello Kenneth,
Looks like you were on the right track with the wiring. The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143910 is going to get a 7 way, and 4 flat on the back of the 2011 Lexus LX 570. After reading the reviews, it looks like there are connectors on both the passenger and driver side of your vehicle. You will need to connect to the the ones on the driver side. One of our awesome customers was kind enough to share a picture of these connectors, so I went ahead and... view full answer...
Hello Robert, thanks for reaching out. According to Hopkins, the # HM11143910 is only for the 2008-2018 Lexus LX, so I would not be able to confirm fit for the 2021 model. The plugs may be similar but it likely would not be wired/pinned correctly for the 2021 model so you might run into things like blown fuses or incorrect light function.
You might want to check and see if Lexus offers an OEM harness for the 2021 model. Otherwise, the only safe way I can recommend for adding a 7-way would... view full answer...
Hey Joshua! I'm sorry to say nobody makes custom towing mirrors for your 2018 Lexus LX 570. The only option is to use universal mirrors like the K-Source Universal Towing Mirrors # KS3891-2. These fit most mirrors 4-1/2" to 11-1/2" tall and use ratchet straps to stay secure on your factory mirror. If you need anything else let me know. view full answer...
Hello Erik; the Redarc Tow-Pro Trail Brake Controller w/ Custom Harness # RED74UR is a new brake controller from Redarc. It is not the Elite or the Liberty with the main difference being the SwayStop feature. SwayStop is designed to be used when the trailer brakes need to be applied without the vehicle brakes to help correct trailer sway. view full answer...
The Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors part # HM11143910 is the only available plug-in seven way trailer wiring harness for a 2011 Lexus LX 570. I checked out some of the review and the few complaints that I saw were that the plugs appeared to be pinned incorrectly. There are two connectors on the drivers side and two connectors on the passenger side. The harness will plug into both sets of connectors but the connectors on... view full answer...
The harness you need to install the Brake Controller Adapter part # 3040-P will be located underneath and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 5-pin connector that mates with the one on the adapter.
I attached a picture that shows what it would look like. view full answer...
Hopkins trailer connector # HM11143910 is designed as a replacement for 2013 Lexus LX 570 models that came with a factory tow package and 7-Way connector. It sounds like yours did not come with the factory tow package or it is not connected in the right place and that would be why it isn't working. If you have it plugged into the connectors on the passenger's side of the vehicle then try plugging the harness into the same connectors on the driver's side. Or it could be that the dealer has... view full answer...
The Recovery Track Flat Carrier # RR43235 connects to a Pioneer platform rack via T-Track. It comes with everything you need to get that secured. The aero crossbars # RRVA126B-2 have T-slots as well for the Recover Track Flat Carrier to mount! Recovery Tracks are not that long though, so your crossbar spread of the crossbars will have to be decreased to work, which could be unfit to use other accessories on the roof. Something to keep in mind. view full answer...
Since your 2017 Lexus LX 570 has a factory 7-way all you need to install the Redarc Tow Pro Elite part # RED44FR that you referenced is the correct install harnesses part # 3040-P with # 331-TPH-017 and you'd be set!
The mounting panel part # 331-TPSI-001 would also work great too. view full answer...
We have exactly what you're looking for. For a 4 way trailer connector you can use the Curt # C55245 or if you need both a 4 way and 7 way, you can use the Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors # HM11143910. Both of these harnesses will plug into the vehicle's existing towing package harness and provide you with the plugs you need to power your trailer's lights.
If you'll be towing a trailer with brakes when using the 7 way... view full answer...
The 10K and 12K Equal-i-zer Weight Distribution Systems like part # EQ37100ET and part # EQ37120ET use different heads and spring bars so if you wish to switch back between the two capacities you will need both of these items which I have listed for you below.
Equal-i-zer 10K Head part # EQ90-02-1000
Equal-i-zer 10K Spring Bars part # EQ90-01-1099
Equal-i-zer 12K Head part # EQ90-02-1200
Equal-i-zer 12K Spring Bars part # EQ90-01-1299 view full answer...
By shank with the 1" diameter hole I believe you are referring to the ball mount platform of the Curt Channel Style Adjustable Ball Mount # C45901. And while Curt does not offer this separately, we do have an option for you that will work, which is a dual-sided hitch ball that fits the platform; you will also need the pins to mount it:
- Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for Curt 2" Adjustable Ball Mount # C45912
- Replacement Pins and Clips # C45925 view full answer...
For your 2008 Lexus LX570 the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus # 3040-P will plug into the factory harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. This is only if you have the factory 7-way. I've attached a video of this installation (one of a Curt connector) on a couple of Toyota's which have the same connection location.
If you don't already have the factory... view full answer...
The port you will want to plug your brake controller wiring adapter # 3040-P into will be located under the dash on the left side, behind the fuel and hood latch levers. The brake controller plug will need to be removed from its port, and connected with the wiring harness. I have attached some pictures from a customer in regards to the location of the brake controller port in your 2013 Lexus LX 570.
If you cannot find the harness, and the dealership technicians cannot find the harness,... view full answer...
Snow tire chains are fits for tire size as opposed to individual vehicles, and there is one set of chains that fits 275/50R21 tires on any vehicle, including your Lexus LX 570; the chains that fit are from Konig, and are the following part number:
- Konig K-Summit Tire Chains # KON84FR
The # KON84FR are great because they fit over the tire tread only, unlike every other chain which installs on the inside of the tire, resulting in possible interference with things like brake lines. With... view full answer...
Thule has an adapter designed specifically for this with the part # TH27PQ. This will convert the hardware of your Motion XT box so that it can attach to the top channels of a roof rack or a platform like you have. view full answer...
Go To Results