If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System # LC736514-ELKIT then you'll need part # LC182492. The flat bracket can be swapped out with part # LC182494 and the swing brackets can be replaced with part # LC182496. view full answer...
Your 2020 Lance 2375 travel trailer will have came with #10 Torflex axles rated at 3,900lbs per axle. The Torflex Lift Kit # K71-707-02 will provide you with 4 lift blocks for your trailer since you have tandem axles. It will provide you with 2-5/8" lift for your trailer.
Since you are lifting your trailer you will likely need more Leveling Blocks # UF48-979051 for the stabilizers and tongue jack. And a couple Adjustable Steps # SASA-10C-G will make stepping into your camper easier since... view full answer...
Yes, it is James. The PowerMax 310 RV Toilet item # PM42VR is a Dometic 310 toilet. The PowerMax label is a high-performance flushing system featuring a powerful swirl-jet cleaning action.
The PowerMax 310 RV Toilet item # PM42VR has a elongated seat designed to be similar to one you'll find at home. It has a ceramic bowl for easy cleaning and a foot operated flush pedal.
The PowerMax 310 RV Toilet item # PM42VR measures 18-1/2" long x 15" wide x 20" tall and has a seat height of 18".... view full answer...
Hey Bennett,
The etrailer RV Cover for Travel Trailers # e37VV is made of polypropylene, which is waterproof, rip-resistant, and breathable so that moisture can wick off of the cover and trailer walls and prevent mold growth. view full answer...
Hello April, thanks for reaching out. The Fantastic Vent 4000BT is a standard 12v roof vent so that can be used to replace a manual vent as long as you have a way to get power to the vent. That said, the 4000BT is an older model that we no longer carry. If you are looking for a vent upgrade, we do have a great option for that. I recommend the following:
- MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White # MA00-05100K
This is a 12v 10-speed fan that fits... view full answer...
Hi Phil; the Deluxe Compartment Door Key Lock # 37200155 does not have a keyed alike option so you would have different keys for each lock. What you can use instead is the Replacement Cam Lock for RVs # BA56FR which can be keyed alike.
Make sure you choose keyed alike from the drop down menu before adding them to your cart. These measure 7/8" long x 3/4" diameter and fit 5/8" diameter cutouts. You can measure your fresh water tank door to see if they will fit. view full answer...
Good question, and the Dexter Torflex lift kits are for square torsion axles, while the over/under kits are for standard round axles with double-eye springs. Your 2022 Lance 1995 travel trailer utilizes round 3,500 lb axles, so you will need the over//under kit, with the correct part being the following:
- Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
The # K71-384-00 will not void the warranty of your Dexter axle, and lifts your trailer approximately the same amount as... view full answer...
The # FV807357 Fan-Tastic Vent Roof Vent Assembly Upgrade Kit will work for your 2019 Lance 2185 Travel Trailer if the opening meets the requirements. In order to install this vent, you must have a 14-1/4" x 14-1/4" opening approximately in the trailer's roof and ceiling and the roof can be no more than 4" thick.
These are standard dimensions for a vent opening. If this does not work for you please send measurements and I will do my best to find a solution.
I have attached a review of... view full answer...
Hey Edwin,
The Skylight # SR89YR will work perfectly fine with your 1-1/4" thick roof on your 2018 Lance 1575, though they typically will require some trimming to the garnish to fit perfectly.
You will want to pick up 2 tubes of self leveling sealant # 34427034145-1 to make sure you have no leaks into your roof.
Did your old skylight break? view full answer...
Hey Richard, so unfortunately we don't have that info handy but we do carry a bunch of 3 step RV steps that could work for you, it'd just be a matter of taking some measurements and comparing them to the steps.
For example, we have the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7833 which has a 375 lb capacity, uses a 23" wide x 12-1/2" tall x 8-1/2" deep mounting bracket, and will work with an entry height of 23 1/2" to 34 1/2".
So to confirm if these'll work or... view full answer...
Hello Tom. You are on the right track. The Specialty Recreation RV Shower Pan # SR35RR is 36" long 24" wide with a RH drain, so it sounds like this will work for you. We do only have it available in white though, nothing in parchment or off-white.
The SW2436P surround you mentioned will work with a 36"x24" pan. As long as the 66" height is correct, this would definitely work for you.
Leave a reply below with any other comments or questions and I will get back to you. view full answer...
Hey Jason!
I believe you are looking for a standard propane pigtail such as one of these guys here:
- 12 Inches: MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4" MPT # 100473-12
- 15 Inches: MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4" MPT # 100473-15-MBS
- 20 Inches: MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4" MPT # 100473-20-MBS
This connects to the propane tank and runs into the propane regulator. If that doesn't sound... view full answer...
Hey Eddie. The Replacement 12V Power Cord item # VGR56ZR is designed specifically to work with the Voyager WiSight 2.0 Wireless RV Backup Camera Monitor - 4.3" Screen item # ASA87FR. This monitor is the one included with the Voyager WiSight 2.0 Wireless Backup Camera System item # ASA24YR.
What model number is on the back of your camera? I attached a picture of the back of the item # ASA87FR camera below. If you could get put that information from the back of your monitor into the box... view full answer...
Hi Matthew; if I had to guess you probably have 3,500 lb axles on your trailer. However, you will need to verify this by checking your axle tags. Assuming that is correct, you can replace the brakes using # AKEBRK-35-SA or for Dexter # 23-468-469. These are 10" x 2-1/4" brake assemblies that fit a 4-bolt brake flange. If you just want the actual brake shoes it would be the # K71-681 and # K71-682 assuming they're Nev-R-Adjust (self-adjusting) brakes.
If you find you have a different axle... view full answer...
Hey Chris,
The length I'm seeing for your 2002 Lance 921 is showing as 9'-6" so the Camco UltraGuard Slide-In Camper Cover # CAM45770 (18') would be too large to fit. You would instead want the Classic Accessories PolyPro III Deluxe RV Cover # CA80036, which fits campers 8' to 10' in length. I would doublecheck that length measurement and if you find it's different then let me know and I can pick out the correct fit for you.
These covers are designed to accommodate rooftop accessories... view full answer...
Hey Aaron, since it's a Fan-Tastic roof vent the correct lid would be the part # FVK1020-19 that you referenced. They've only used the one roof vent lid design over the years. view full answer...
Hey Ron,
I did some checking, and I wasn't able to find any specifics on the coupler that came on your 2018 Lance 1475 TT. According to the photos I saw though, it definitely looks like a unique-enough coupler that you'll either need to reach out directly to Lance about a replacement (I've tried reaching out but only got crickets back from them) or use an aftermarket replacement.
Here are a few options that might work, but you'll need to confirm on your end since Lance doesn't have any... view full answer...
Hey Joe! Did your old jack quit on you? Your 2019 Lance 1985 travel trailer will have the standard A-frame 3" bolt pattern on the tongue. Both the Lippert Smart Jack Electric Trailer Jack # LC643589 and Phoenix Electric Trailer Jack # UF38-944040 will fit. The one big advantage the Phoenix has is the warranty. The standard warranty is a 2-year but if you register the jack within 90 days you will get a 10-year warranty which is really nice to have. view full answer...
Hey Steven,
Do the jacks have a brand/model name on them besides just Lippert? If we can figure out the model I can then get the correct manual crank handle for your system. view full answer...
Hey David, look like your 2022 Lance 2185 has 3,500 lb axles that are 2-3/8 inch in diameter which means the correct shock kit would be the Lipper kit part # LC281255 which would attach to the brackets you have now. I would recommend verifying the diameter of your axles though. view full answer...
Go To Results