No long-term contract, Natalie - but a service plan is required to use the trackers.
When you buy the 3000 with wifi assist # PM84FR, 5000 # PM64FR, or 5000 with wifi assist # PM74FR from etrailer, you’re purchasing the hardware/device only. To activate tracking, you’ll scan the included QR code and set up a monthly service plan directly with PingMaster through their app. There’s no long-term commitment, but the tracker won’t report location or alerts without an active plan.
If you’re... view full answer...
Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item # C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket item # C59HR.
With the 6-way installed you can use the included cord to connect it with the 7-Way on your RV. The center pin on the 6-way is wired for 12V power so this is where you'll want to connect your RVi Brake towed battery charger.
I have... view full answer...
Good question Mel, and I don't blame you for being confused since there are a lot of options and there is probably more than one right answer. The correct pivot arm position will depend on the clearance between the nose of the camper and the cab of your truck. I have included some pictures below to help illustrate.
If your truck is a long bed, clearance should not be an issue, and you will want to use the one of the centermost positions. Basically, you want to keep the Kingpin centered... view full answer...
Wayne, it does not look like the Greystone Built-In RV Convection Microwave # GR27FR include a mounting bracket. I actually wasn't able to find one at all for that model. They make one for their smaller # 324-000106 microwave, but nothing for the larger model.
If you're not married to Greystone, High Pointe does have one that is similar to # GR27FR that includes a mounting kit # HP36ZR. view full answer...
Hey Kelly. The Lippert 2" Accessory Receiver Hitch for Up to 66" RV Frames item # LC78DX does not come with installation hardware. I checked with Lippert and they said that this hitch is intended for use with RVs that are prepped for a hitch, meaning there would already be brackets welded to the frame of the RV.
If you would like a more universal hitch that does come with installation hardware, I recommend the Stromberg Carlson Adjustable Accessory Hitch Receiver item # SC45MR. This hitch... view full answer...
It sure will Russel. The Parkit360 Force Electric Trailer Dolly item # PA96VR has a 5,000 lbs capacity. It's going to work great with your Jayco Jay Flight SLX 195RB. It also has both a 2" and 2-5/16" hitch ball included.
What kind of ground are you going to be moving your trailer and how far do you have to go? view full answer...
Hey Dave, so you bought the # PD4645V converter section for your magnatek 6345 converter, is that correct? If so, the # PD4645V does have a jumper which can be set to the Li or Lithium mode. I have included a screenshot of the instructions below to show you where it is. With the jumper in the LI position the charger will maintain the lithium batteries with the required 14.6V. view full answer...
Ryan, the BulletProof Hitches Weight Distribution System w/ Sway Control # BPH46VR does not come with a shank, but the shank they'd normally use would be the Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount # 358WEIGHTDIST. view full answer...
Hey David, thanks for the picture. I was able to track down a spec sheet for your Dexter axle which I have included below. The 031-029-02 bearing is item # 15123 and the 031-030-02 bearing is item # 25580. For a bearing kit you can use part # BK3-110 which will come with both bearings, races, grease seal, spindle washer and cotter pin. view full answer...
Hey Dennis, thanks for reaching out. Yes we do have a braket for attaching the 4-flat plug to the car. For that I recommend the following:
- Curt Mounting Bracket for 4-Pole Flat Trailer Connector # C42CR
What most people do it use self-tapping screws to attach to the crosstube of the hitch. That or you can use a small bolt and nut to attach it to the bottom of the bumper. I've included a few pictures of examples.
What kind of trailer will you be towing? view full answer...
Good morning, James. The total length of the Dexter DX7.5L A-60 Brake Actuator # DX29FR is 19". I made a diagram for you which I have included below. view full answer...
Hey, Jay!
For the MORryde I-Beam Mounted Stabilizer part # MR96RV, you are going to attach it to the bottom of the I-beam. I've included a link to our install video and attached an image of how it will look once attached to the beam.
What camper are you wanting to use this on? view full answer...
Yes, we do Tyler. For an air compressor that can be powered off of a 7-way connector, I recommend the Air Lift 7-Way Automatic Portable Air Compressor item # AL79FF. This air compressor can go as high as 120 psi to fill your air stream's tires.
The Air Lift item # AL79FF weighs only 6 lbs and can be powered through your vehicle's 7-way connector or by attaching it to a battery with the included clamps. The kit includes a carrying case, a 16' hose, and a tire inflation attachment.
What... view full answer...
Hey Robert,
Without knowing the exact sizes of your current bunks on your trailer I would recommend the Tie Down Marine Slides # TD49FR. These come in 4 3 foot sections and 4 1 foot sections to cover different sizes and adjust if you have a longer bunk than 8 feet. All mounting hardware is included as well.
What kind of boat do you have? view full answer...
Hi Corey!
That is a very good question! The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" # SH32TR for your 2026 BMW X5 does come with safety chain loops with the included towing kit. If you take a look at the picture I have included, I circled them in red.
You will need to install them when you are bolting on the "block" the receiver or ball mount locks into.
What are you planning on towing? view full answer...
Gen-Y currently only shows their 5" Offset # GY43XR only fitting the 2017 and newer Ford Super Duty trucks. I have included a drawing with the dimensions for this below you can check and see if it will fit your 2012 Ford F-350. If not another option would be to use a Rail Adapter # C88KR with an Offset Ball # 16055.
Based on information I could find online I see the 2024 Brinkley Z3100 is going to come with a Lippert Rhino pin box. If this is what you have you will need the Gen-Y Hitch... view full answer...
Hi Steve!
I've actually run into this quite a few times with the 2026 Ford F-150 mirrors, so no pictures necessary. What you are looking for is the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side # KS69NQ.
These mirrors have cutouts in the housing specifically for those lights/sensors on the bottom of your mirrors, as well as a lens on the side in case you have that indicator light on the end of the mirrors. I included an image showing the lights/sensors... view full answer...
If your 2019 Toyota Tundra includes the factory trailer wiring for a trailer it will have a connector under the dash for a Trailer Brake Controller # RED72CR. This Controller # RED72CR does come with the connector for this application. The small connector is taped into the harness behind the left side kick panel.
If you do not have the factory trailer wiring you will want our Wiring Kit # ETBC7, a Brake Controller # RED52VR and a 4-Way # HM11141835. view full answer...
Hey Hannah, thanks for reaching out. Yes, the Curt # C59236 will indeed work on a 2026 Chevy Equinox EV LT1 without the tow package. This is a universal hardwire harness that can be used on most vehicles. There are no custom plug-in harnesses for the 2026 Equinox, so that might have been what those shops you talked to were referring to. The # C59236 universal harness will work just fine though.
As far as installers, we do have a few in your area. For near your zip code, I suggest checking... view full answer...
Go To Results