Hi Fern; unfortunately, it looks like nobody makes a hitch that fits your 2019 Hyundai Accent Hatchback. This means the only option would be to take the # E17 to a local fabricator and have them fashion a custom hitch for your vehicle. view full answer...
Hey David! There is a bit of trimming required on the bottom part of your bumper cover. I have attached a screenshot below from the installation instructions for the Curt Hitch item # C11548. This is so the 1-1/4" receiver can hang down below your rear bumper.
The Curt Hitch item # C11548 is confirmed to fit the 2019 Hyundai Accent. It is custom fit and bolts to your car with included hardware. This is a class I hitch with a 1-1/4" receiver.
What are you needing a hitch for? view full answer...
Hi Amy!
I can definitely help you get everything you need to flat tow your 2017 Hyundai Accent SRT Sport Hatchback, but I do need to note that it must be a manual transmission model. The automatic options cannot be flat towed. With that in mind, I have a full set up below:
Blue Ox Base Plate Kit - Removable Arms # BX2338
Blue Ox Acclaim Non-Binding Tow Bar - Coupler Style for 2" Ball - Car Mount - 5,000 lbs # BX4330 (includes safety cables)
Roadmaster 4-Diode Universal Wiring Kit for... view full answer...
Hey Matt. The Curt T-Connector Vehicle Wiring Harness item # C56149 does indeed come with installation instructions. I have linked them below as well. The wiring harnesses you are looking for are located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Right behind the tail lights essentially.
As far as a ground goes. You can look around for a bolt and clean off the paint around it and attach it to that. Or you can drill a hole, clean the paint... view full answer...
Hello Sébastien; the Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style # KH11812 will fit your 2012 Hyundai Accent if you have the 1.6L I4 Engine. Also yes, we do ship to Canada.
Bonjour Sébastien; Le chauffe-bloc moteur sur mesure Kat's Heaters - Style de cartouche # KH11812 conviendra à votre Hyundai Accent 2012 si vous avez le moteur I4 de 1,6 L. Oui aussi, nous expédions au Canada. view full answer...
Starting with the hitch, I recommend the Draw-Tite Class I hitch, part # 24884.
You are correct that the weight of your bikes narrows the bike rack possibilities down quite a bit. If you could easily remove the battery pack from one or both bikes to remove enough weight to lower the combined weight of both bikes to 90 lbs, we offer a rack that would be perfect for you.
The Thule Epos Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel and Frame Mount # TH99XE has a 66-lb capacity and... view full answer...
The difference between the Curt Trailer Hitch Receiver # C11092 and the Draw-Tite Sportframe Trailer Hitch Receiver # 24795 is that # 24795 has a hidden cross-tube design and will actually sit above the exhaust which is why there isn't an L bracket like the Curt # C11092. The Curt Trailer Hitch Receiver # C11092 will sit below the exhaust which is why the L bracket is needed, and has an exposed cross tube.
I recommend the Draw-Tite Sportframe # 24795, because it offers the same weight... view full answer...
For a rebuild kit for your Roadmaster Stowmaster you'd want the part # RM-910003-20 actually as the other part number you mentioned is not the complete repair kit. view full answer...
I spoke with my contact at Thule, the manufacturer of the Sears Roof X-Cargo Carrier, and you will need Replacement U-Bolt, # TH02943. These are sold individually so you would need to order a quantity of four. view full answer...
While we do have a hitch that fits your 2022 Hyundai Accent, your current hitch does not fit, and the reason for that is the Accent underwent a generation change in 2017, so it was redesigned with different frame spacing and mounting.
So for a hitch that does fit your '22 Accent so you can use your bike rack, what you will need is the following from Curt:
- Curt Trailer Hitch Receiver # C11548 view full answer...
The diameter of the tube (the hole the skid goes in) is 1-3/8 inches for the Replacement Shoe Tube Holder for Fisher Snowplow # 3371303310. view full answer...
We do have the Roadmaster car-side quick disconnects you are looking for, though the part number is a bit different than what you had mentioned. Instead, what you will need are the following:
- Roadmaster Tow Bar Quick Disconnects - Car Side Only # RM-222
These do come with both the driver and passenger side so you're set. view full answer...
The Tow Doctor for the trailer side is # HM50928. The other one, # HM50918, is the vehicle side.
For the trailer side model it does not work if the trailer has LED lights. LED lights draw too little power for the tester to work properly.
You could test the trailer side by using a separate 12 volt wire and applying power to each function. If the function does not work doing this test you know there is a wiring issue. view full answer...
All of the hitches available for the 2008 Hyundai Accent are Class I 1-1/4 inch hitch receivers because of its limited towing capacity. The Accent's weight capacity is 849 pounds including cargo, occupants and tongue weight. The hitch manufacturers do not want their customers to exceed the vehicle's tongue weight rating so they only manufacture lower tongue weight rated hitches for those vehicles. All the hitches available for the Accent have a 200 lb tongue weight limit.
If the Accent... view full answer...
Sometimes it can be difficult to find how to install the hardware of a trailer hitch but we had the chance to shoot an install video for when we installed the # 24795 on a 2010 Hyundai Accent that I attached to this page that will walk you through the entire process. view full answer...
The side to side center to center bolt hole spacing of the Curt # C115448 hitch is 41.38 inches. One each mounting flange, the bolt holes are spaced 6.56 inches center to center. I've provided a photo showing these dimensions.
The hitch is a confirmed fit for the 2018-2021 Hyundai Accent Sedan. view full answer...
I attached installation instructions for the Curt Circuit Protected Converter # C56175 that you referenced. I will send them to you in a separate email as well. view full answer...
The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts # KH11812 is going to install in the "RF" position (pictured below) of your 2013 Hyundai Accent 1.6L engine block. view full answer...
The only base plates which are a fit for your 2011 Hyundai Accent are indeed the Blue Ox # BX2323, which will work with your automatic transmission so long as you do not have foglights. You will not need to unplug a fuse on your Accent to tow it, though there are a number of other parts you'll need.
For a tow bar I recommend the Blue Ox Alpha # BX7380 which is compatible with the aforementioned Blue Ox base plates and even comes with safety chains. You are also going to need wiring to... view full answer...
Go To Results