I have a potential solution for you, but there aren't any custom fit ladder racks for a 2007 Humvee so we will be looking into "uncharted" territory for your setup.
The only ladder rack that I can see possibly working for your application is the Yakima OverHaul HD when it comes with the track mount. The smallest configuration is with 54" tracks (that can be trimmed to length) and then you just need to choose the best crossbar width for your vehicle:
- 60" Crossbar Kit # Y22AR
- 68"... view full answer...
Judging by the sticker on your bars it does look like those are the factory bars. The Aries Round Nerf Bars # AA204075-2 will fit on your 2007 Hummer H2 just fine in place of the OEM bars. If you'd rather have the black bars then you'd need part # AA204075 instead.
If you're looking for replacement hardware you'll need to get that from General Motors as hardware will need to be a direct replacement. Nerf bars can use specific hardware per each manufacturer which is why it needs to be a... view full answer...
The 2005 Hummer H2 is related to the 2005 Chevy Tahoe and K Source mirrors # KS62075-76G do fit the Tahoe. But they are not a confirmed fit for the Hummer H2. None of the manufacturers we carry have a confirmed fit for the Hummer H2.
The safe bet is to use a universal towing mirror. I have included a link to the universal mirrors that we carry to the right. The most popular option is # KS3891. I have linked a video showing how the universal mirror installs. view full answer...
I called Demco on your behalf, and the Demco Classic Base Plate Kit, part # DM9518193, is indeed a good base plate for a 2008 Hummer H3 and, more importantly, compatible with your Blue Ox Avail Tow Bar, part # BX7420. According to them, no adapter is needed.
Unfortunately, once you have installed this base plate, the hooks will have to stay off. At the point, the only way to mount your hooks back onto the Hummer is to uninstall the base plate and reinstall the hooks. view full answer...
The Blue Ox Bolt-On Base Plate Bracket Kit - 5,000 lbs Item # BX88230 is compatible to be used with any vehicle as long as where it will be mounted is structurally sound enough to tow the vehicle. For instance some off road steel bumpers with D-ring mounts can not be used to tow a vehicle because they have not been tested by the manufacturer to see if they can hold up to the stress the movement of the vehicle puts on that area.
For your 2006 Hummer H3 I recommend Demco Classic Base Plate... view full answer...
So first, your 2004 Hummer H2 does have to be stock to use the Superchips Flashpaq F5 Performance Tuner - GM - Gas/Diesel # SU2845.
If yours isn't, you'll need to take it to a GM dealer to have them return it to stock. As for returns, once something is used, it cannot b returned. And insofar as if the # SU2845 will be beneficial to your '04 Hummer, yes, it absolutely will.
It has numerous tunes, including performance, that allow you to get the most out of your Hummer. view full answer...
They absolutely do! I verified for you that the Aries nerf bars do indeed fit your 2003 Hummer H2, and are available in both a black powder coat and polished stainless steel:
- Black Powder Coated Steel: Aries Round Nerf Bars # AA204075
- Polished Stainless Steel: Aries Round Nerf Bars # AA204075-2
These Aries nerf bars are a nice choice as they will do the job of making it easier to get in and out of your Hummer while also providing it with a unique, more rugged overall aesthetic. view full answer...
We do have a fit for your 2007 Hummer H3, but the CIPA Custom Towing Mirror - Slip On - Driver Side # CM11551 wil not fit. They actually only fit 2015-2019 Ford F-150.
The towing mirrors I recommend are the CIPA Universal Towing Mirrors - Clamp On - Qty 2 # CM11980-2. These mirrors easily clamp onto your existing mirrors and are a fit for your 2007 Hummer H3. Another reason I recommend these is that they pivot 360 degrees to give you the view you need at all times. view full answer...
To make sure a hitch bike rack will work on your Hummer H3 you will need to measure to make sure the bike rack will clear your spare tire.
If you measure from the center of your hitch pin hole to the farthest part on the back of your vehicle, which would be your spare tire, and that measures less than 11-1/2 inches then you could use the Swagman Dispatch Bike Rack # S44FR. I have included a link to instructions for the proper installation of this product.
It has a weight capacity of 90... view full answer...
We have a similar e-bike rack that would clear the rear spare of your 2008 Hummer H3 with the Yakima OnRamp part # Y36FR but the EasyFold XT does not have the needed clearance.
The OnRamp is a very similar E-bike rack that has a ramp that pulls out to make loading/unloading easier. view full answer...
The hitch you ordered is the Draw-Tite # 75382 which is a 2 inch Class III receiver. For a standard hitch pin and clip use part # PC3. If you prefer a locking pin part # e98882 will fit the hitch.
I've also linked our complete selection of ball mounts that fit. One I like to recommend is the B&W Tow & Stow, part # BWTS10037B. It's adjustable with two different ball sizes so it can be used with a large variety of trailers. It also flips under itself to a stored position to keep it... view full answer...
We have not yet tested the Curt Roof Mounted Cargo Basket part # C18115-117 on a 2006 Hummer H2 with a factory roof rack therefore, in order to determine compatibility you would need to do a bit of measuring on your Hummer. For starters, the Curt cargo basket works with crossbars that are spaced between 22 and 50 inches apart on center and do not exceed 3" wide x 1-5/8" tall. Therefore, as long as the factory roof rack on your H2 fits these two criteria then it will work well for you. Unfortunately,... view full answer...
Yes, the Adapter for Surco Safari Roof Racks # SPCH100 will mount to your factory rails allowing you to mount your Surco Safari Rack 5.0 Rooftop Cargo Basket for Factory Rails # SPS5060-1101 to your 2008 Hummer H3. view full answer...
If the hitch on your 2007 H2 is a 2-inch size then you can use an adapter/extender like the Curt Hitch Extender # C45796. However, you need to be aware that use of any extender will reduce your hitch's tongue weight and towing weight ratings by 50-percent.
This loss of hitch capacity results from the change in the geometry of the forces on the hitch. In the same way that slipping a length of pipe over a tire iron gives you more leverage to loosen a stubborn lug nut, using an extender... view full answer...
The RockyMounts DriveShaft Track Truck Bed Bike Rack part # RKY1086 is compatible with GM truck bed tracks so it should work on a 2010 Hummer H3T as well since it's made by GM but I don't have official confirmation. view full answer...
I checked with Timbren and they have confirmed that the Timbren Rear Suspension Enhancement System # TGMRH2 that you referenced is compatible with your 2005 Hummer H2 with auto-leveling air ride suspension.
I attached installation instructions and an FAQ on Timbrens for you to check out. view full answer...
To see if the GearDeck 17 Enclosed Cargo Carrier for 2" Hitches # H00604, will fit on your 2006 Hummer H3 with a spare tire on the back there are a few things you will need to check out on your hitch and your vehicle.
The GearDeck, # H00604, can only be used on Class III and Class IV 2-inch hitches. So you will want to make sure you have a 2-inch hitch on your Hummer.
Next, you will need to measure the distance from the center of your hitch pin hole to the farthest back part of your spare... view full answer...
The SportRack Hitch and Cable Lock you referred to, part # A32022 isn't completely compatible with the SportRack Ridge Swing # SR2415 bike rack. The anti-rattle hitch portion of the lock will indeed work with the rack, but the cable lock portion is not compatible.
You can purchase the anti-rattle lock portion by itself as part # SR0901. If you were needing a cable lock, the etrailer brand # e98891 would be a good choice. view full answer...
To connect the Redarc Tow-Pro Elite item # RED63RR to your 2003 H2 you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # 3015-P.
This harness plugs directly into the Redarc wiring adapter that comes with item # RED63RR and also to the port underneath your Hummer H2's dash.
The port is only available on the H2 models with the factory 7-Way and without the factory tow package. view full answer...
Bar style friction sway control units such as # 83660 are not trailer or vehicle specific. On the trailer, the side of the frame will need to be clear 21 through 27 inches back from the center of the ball cavity of the trailer coupler. The bracket that mounts on the trailer end is 3 inches tall.
On the vehicle side you will need to use bracket # RP26003 with a ball mount. The friction sway control bar comes with everything else you will need. view full answer...
Go To Results