I do still have a few options for lifting the trailer but the Correct Track Trailer Alignment and Lift Kit part # RR23QX is indeed incompatible with the MORryde CRE3000 Equalizers. Therefore, you can either change these out to standard ones like the Curved Equalizer for 1-3/4" Wide Double-Eye Springs part # TREQE1 or look into an axle over conversion kit. That said, this option only works for you if the leaf springs are under the axle. If so, I recommend the Dexter Trailer Springs Over-Under... view full answer...
Thanks for the information and picture James! Your Curt 5,100 lbs capacity axle uses item # 25580 inner bearings and item # LM67048 outer bearings. So you would need the Bearing Kit item # BK3-300, which includes both bearings, along with both races, a grease seal and cotter pin. You'll need one kit per hub.
As far as a replacement axle goes you wouldn't be able to upgrade to a 6,000 lbs axle and keep the same hubs. The 5,200 lbs Dexter Trailer Axle Beam with E-Z Lube Spindles item #... view full answer...
Thanks for reaching out!
To lift your 2020 Grand Design Reflection 150 260RD 5th Wheel so it's 2" taller I recommend using the Correct Track Trailer Alignment and Lift Kit # RR23QX. This installs using the same frame mounting brackets that you already have - all you're doing is adding an extra piece of material make the mounting brackets "longer" for lack of a better term.
This is a very simple, yet effective, way to increase the height of your trailer to what you're needing! view full answer...
I have an option for you. Since you mentioned that you already flipped your axles, the Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX will work to accomplish the lift you are needing. The Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX will provide you with the parts needed to lift your tandem axles and provide you with another 2-1/4" of lift. view full answer...
Hey Mike, thanks for reaching out. The Furrion tankless # FR98SR is one of the few options that lines up well with what you’ve got. It’s designed around the same cutout size as your Dometic 94002BP, so you’re not getting into major wall modifications or trying to reframe the opening just to make it work.
That said, even though the opening is the same, you’ll still want to be ready for some minor plumbing and wiring adjustments since you’re going from a tank-style unit to tankless. Nothing... view full answer...
Hey Erik,
It's common for the light on your Furrion stove's knob to stay on if it senses that the oven is on. Since you're clearly not running the oven but it's still on and staying red instead of changing to blue that would indicate an issue with the oven. Typically this just means that the installer flipped the positive and negative wires so I'd start by checking that first. If not you could have a short somewhere else in the wiring or on the knob's circuit board.
You can remove the... view full answer...
It has not Jerime. The Curt Helux 5th Wheel Pin Boxes like item # C63RJ only fit the Lippert now Curt Rhino bolt pattern. Lots of newer trailer's are using the Rhino Box style pin boxes so that's not too surprising.
Currently the only option to replace a Turning Point pin box is with a gooseneck adapter like the Gen-Y Hitch item # GY48GR.
If you have any additional questions, go ahead and click on the box that says Add Comment and I'll be happy to answer them. view full answer...
Hello Alan, thanks for reaching out.
What brand of AC is your camper wired for? You will want the 2nd unit to be identical to the first one. That is the only way to be absolutely sure it will work with your AC system and everything will intercommunicate correctly.
Let me know what AC you have now and I am happy to look into it. If you can provide the brand and model number of your AC unit that would be the most helpful. Reply on this page. view full answer...
Hey Bob, thanks for the information! For Dexter 4,400 lbs axles you will need the Grease Seal item # 58846. It has a inner diameter of 1.719" and a outer diameter of 2.565". It is sold individually.
Here are the rest of the parts you'll need if you're swapping out bearings and races too.
Bearings item # L68149 and item # LM67048
Races item # L68111 and item # LM67010
Are you doing routine maintenance or did a seal blow out? view full answer...
Hey Bryan, good to hear from you again!
The Curt Helux Shock-Absorbing 5th Wheel Pin Boxes are currently only designed to replace the Rhino pin box. We have some alternatives, but they are the ones that connect to a gooseneck hitch ball like what we see with the Gen-Y # GY48GR and Shocker Hitch # SHK47YR.
What is your reason for wanting to replace the Turning Point? I might be able to find an alternative solution for you. view full answer...
Hey Mark, thanks for the information! For your 2021 Grand Design Reflection 260, you'll want the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers item # RM-2460-2560. This system is rated for 5,000 lbs axles so it'll be perfect for your 5th wheel trailer. The included shock kit is really going to take the bounce and road shock out of your travels.
You'll also need two sets of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles item # MR66ZR. U-Bolts... view full answer...
Hello Dave, thanks for reaching out. Right now we only offer the Lionshead Aluminum Jaguar wheel in a 16" glossy black. I am sorry to say we do not offer it in a 15" silver. Some of these Lionshead wheels are only available from the factory and are hard to get aftermarket, and I believe this is the case for the 15" Jaguar wheels. You might want to try reaching out directly to Lionshead to see if they can provide one. Otherwise the only solution I can offer would be a similar 15" silver... view full answer...
The length I'm seeing for your 2019 Grand Design Reflection 150 Series 290BH Fifth Wheel Trailer is 34' 1" so I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer # AD59ZR.
The Olefin HD travel trailer cover works best for long-term storage in all climates. The top panel constructed of Olefin HD fabric blocks harmful UV rays that can cause cracking and fading, beads water on contact, prevents dirt and dust particles from reaching trailer surface, and eliminates... view full answer...
Hey Tony, that’s a really good question, and you’re right to double check this before ordering since getting the wrong pin box can turn into a big headache.
No, The Curt Helux gooseneck adapter, part # C22UB, will not replace your pin box because it only fits fifth wheels with the Lippert Rhino bolt pattern. Most 2022 Grand Design Reflection 150 Series trailers typically come with a Lippert 1621 pin box instead of the Rhino, and if that’s what you have, this Helux won’t bolt up.
Because... view full answer...
Hello Scott, thanks for reaching out. I am sorry to say that we do not offer the Dexter 7763221 axle, nor do we offer any 4,400 lb rated axles. We may have a higher rated axle that is a suitable replacement though. If you want to look into a replacement I will need you to tell me the hub face length and the spring center distance of the current axle. Drop that in the comments below and I am happy to look into it. view full answer...
Hey Kelvin, I have a solution for you but Reese doesn't have a Goose Box that fits in place of the Lippert Turning Point pin box. Instead you'd have to go with a Gen-Y Fifth Wheel to Gooseneck Adapter part # GY48GR which is only option that fits in place of the Turning Point. view full answer...
Hey Ray, sorry about that! The pictures and video are correct for the DeeMax Brake Line part # DE99NR. IT's basically a 90 degree male on one side and a straight male on the other side. I will send an update to have the title fixed thanks! view full answer...
Hey John! I wasn't able to find anything off of that UO12-039 part number either. The MORryde Suspension Upgrade Kit item # MR46ZR is their UO12-016 pn. These have 2-1/4" long shackle straps that do work with the MORryde CRE3000 item # MR54AR. The item # MR46ZR will give you all of the wet bolts and bronze bushings you need for your Grand Design. view full answer...
Hello William, thanks for writing in.
You will need to double check the weight rating of the axles to make sure that you have 2 axles and they are rated for 6,000 pounds, unfortunately I do not have a database that supplies me with this information and there is not a standard on what they put on.
For the electric brakes you are going to want etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K # AKEBRK-7-SA. Nice thing about these brakes is that they... view full answer...
Go To Results