The camera can physically be moved to adjust the up and down angle by using a firm grip on the camera and pushing it up or pulling it down.
It will not let you adjust side to side and there is no adjustment in the unit controls to move the camera around.
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF. view full answer...
That is a good question. There is no database we can use to cross-reference and a lot of fifth wheel pin box manufacturers do not include the model on their label. The best way to find out is to have a dealership run your VIN. They should be able to tell you what model pin box the camper was originally equipped with.
If that fails, we have a chart that you can use to identify the pin box model. If you take a look at the link below you will find the measurement chart. You can take measurements... view full answer...
It is actually quite common for the front and center hangers to be different sizes on a tandem axle trailer. The idea behind this is that when you factor in the height of the equalizer and shackles, everything will be at a level height. In most cases the front and rear hangers will be the same, with a shorter center hanger. This is certainly not a universal rule, as different trailer manufacturers will do things differently. It sounds like what you are describing is more or less normal... view full answer...
The Adco Olefin HD RV Cover for Travel Trailers up to 22' # AD47ZR does have built-in vents to allow for the trailer to breathe and reduce moisture but it's best to wait to cover the trailer until it's dry to avoid mold/mildew growth that might not be able to dry properly while the cover is on. view full answer...
You will have to go from the side or underneath. Then you can unplug and remove the old pad and replace it with the Replacement 29-Volt Seat Heating Pad for Thomas Payne Seismic Series RV Couches and Chairs # 674864.
If you need to replace the entire kit you can use the Replacement Seat Heater Kit for Thomas Payne RV Furniture # 195-000113 view full answer...
The Advent Air RV Air Conditioner - 13,500 Btu - White # ACM135 has a power draw of 40 amps at startup and 12.5 amps roughly running. The 15,000 Btu # ACM150 has a power draw of 45 amps at startup and 15 amps running.
The Start Capacitor for Advent Air RV Air Conditioners # ACMSCKIT is highly recommended for making that power draw less of an issue. view full answer...
I contacted the manufacturer asking if they had a diagram on how to adjust the tension. Please note the attached image showing where to use an Allen wrench to turn the adjuster on the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen, # 3441409200PBK. view full answer...
According to the folks at TorkLift, the # TLA7700L battery box would be considered water resistant, not waterproof, as all batteries need to be able to vent. The don't offer a battery box that's 100% waterproof for that reason. My TorkLift rep tells me that they've received feedback from customers that have used self-stick weatherstripping on the lid of the box to help seal it which works well to keep water away from the wiring connections at the terminal. I've linked to a product description... view full answer...
The purpose of the ground on the Jensen Antenna - Rooftop or Side Mount part # AN519 is to eliminate static electricity, as well as protect against energy to the mast if the antenna comes in contact with live electrical wires. view full answer...
If the 12v pin is connected to your trailer batteries and there isn't anything in place to prevent power from back feeding then the pin will remain live. If you install a diode # RM-690 in between the trailer battery and 7-way 12v pin it won't be able to back feed past the diode. view full answer...
While we do have a way to measure your leaf springs, we do not have the specs that show the exact leaf spring size on a 2020 Forest River Cherokee Alpha Wolf 26DBH-L.
With that being said, you can definitely figure out the measurements you need on your trailer. The measurements you need depend on if you have double-eye leaf springs or slipper springs on your rig.
If you have double eye springs, here is the information we need:
- number of leaves needed
- axle weight rating
- length... view full answer...
I can tell you how to determine what replacement toilet can work in your Forest River travel trailer, but we have no way of knowing what toilet is currently in that trailer and what will fit. It's pretty simple though as you just need to measure from the wall to your toilet's center flange, which is where the mounting bolts will be, as you can see in the cut out I added below. That measurement will be the minimum distance required for the fit.
For example, if you took that measurement... view full answer...
Installing the Furrion RV Electric Fireplace with Crystals - 30" Wide - Recessed Mount - Black # FF30SC15ABL in the "half-flush" mounting position is going to allow for better ventilation of the fireplace which will offer better performance and help prevent the fireplace from overheating and kicking off. I always recommend mounting it with the vents showing but Furrion has made their fireplaces capable of being flush mounted as many customers want the sleek look or don't have the room for... view full answer...
Yes, you certainly can use a larger tire like the # AM32131 on a 3,000 lb axle. While we do not disagree with what the forest river rep told you regarding the "rotational mass aspect", this is generally a non-issue when upgrading tires, especially if you are well under the GVWR of your trailer. As long as the hubs you are using have the 5 on 4-1/2" bolt pattern, can support a 14" wheel, and you have enough clearance in your wheel well, you will be good to go.
Most any hub that will work... view full answer...
If you are looking to replace an entire vent assembly the most common cut out dimensions are 14-1/4" x 14-1/4". As to not disturb the roof sealant you can remove the inner garnish on the vent from inside your 2018 Forest River Sunseeker. You will be able to see the opening with the garnish trim removed. You will also want to determine the thickness of your ceiling to ensure if the new vent includes a new garnish that it is tall enough to fit your Sunseeker.
I have linked an article below... view full answer...
To turn the quick disconnect propane fitting on the Greystone Outdoor RV Griddle and Grill # WAY34FR you would have to overtighten it, which can be done but isn't really recommended as you could end up damaging the fitting and allowing propane to leak from the fitting. view full answer...
We don't have any way of knowing what slam latches are on any trailer; if you have a Bauer BP-20, Fastec (FIC) 30205, Global Link 40101-2006, BLL-50101-2006 - or if your cutout is 3-1/4" tall x 4" wide you can use the Bauer Products RV Baggage Door Slam Latch # BA57FR.
Or if you have a 1-1/2" thick Global Link, Fastec (FIC), Bauer, or Lippert Components standard baggage door lock you can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option # 295-000015. view full answer...
That's a good question, and the answer is yes, the improved version is in fact the Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens # CE44VR.
This is the updated replacement of the 003-30LEM2, but with a much better seal. The OEM one you referenced was known for its issues with not being sealed, so an improvement was made with this light. It still isn't a "submersible" light but it won't have the same issues as its predecessor due to it's superior seal.
I... view full answer...
Go To Results