1994 Jeep YJ Cold Air Intake

The Adarac Pro Series truck bed ladder rack part #A38ZR is a confirmed fit for your 2020 Jeep Gladiator, is black, has a 500 lb weight capacity, and is compatible with tonneau covers like the BAK X4 part #BAK88ZR that fits your 2020 Jeep Gladiator.…

The inner stainless steel ring included with the Spindle Grease Seal Set #BB60005 has an inside diameter of 1.0645 inches (and an outside diameter of 1.375 inches). This ring is designed to install on the spindle for the grease seal to ride on once…

The #168233 Double Lip Grease Seal has an outside diameter of 2.332 inches and an inside diameter of 1.688 inches. This seal is not compatible with a AF2527E seal with a O.D 2.312, because, even though the O.D. id very close, the inner diameter of…

Pulling the wheels and hubs off of your 5th wheel trailer is the best option when trying to identify what wheel bearings and seals are installed. On the back of the wheel bearings there usually is printed a part number like #L44643. With these…

I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR does not have an internal battery so it will require you to install a 12v outlet #RM-9332 since your 2009 Jeep Wrangler requires you to disconnect the positive battery cable. This…

The Linxup GPS Tracking Device #300-AT3 is for the unit itself while the Linxup GPS Tracking Device #300-AT3-S includes a 1-year subscription to the tracking service. If you are only looking for one unit it is best to get the unit with the tracking…

I spoke with my contact at Curt and they informed me that the case dimensions of the Curt Curt Ball and Safety Chain Loop Kit #C60692 are…

The OEM location for the gooseneck ball hole in the bed of your 2020 Ford F-350 will be 45-1/2 inches forward from the rear edge of the truck bed. There would be a flat spot in the bed where the ball will install as well. I attached a picture that…

No worries, we are happy to help! Yes, the Curt Ball and Safety Chain Loop Kit #C60692 listed as a fit for your 2019 Ford F-250 replaced the C60609 so they are essentially the same and they both fit your F-250. Sometimes the changes made to kits…

In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a…

We do have a trailer hitch receiver that fits your 2024 Nissan Pathfinder, from Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C46DR