
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When heavy trailers or bed loads make the rear sag and steering feel light, this setup keeps things under control. The Timbren Rear Suspension Enhancement System adds up to 15,000 lbs of capacity to help stabilize and level your vehicle. The hollow rubber springs sit above the rear axle, working with the factory suspension to cut down on squat, improve roll stability, and keep braking and steering steady under load.


Bumps and uneven roads don’t have to beat up your suspension. These hollow rubber springs absorb most of the road shock before it reaches the chassis. They act as shock absorbers, taking the brunt of bumps and rough terrain so you get a smoother, more stable ride when towing or hauling gear. Less impact on your stock suspension means less wear and tear over time and a more comfortable drive no matter how full the bed is.

When a gust of wind or a tight corner tries to push you around, each spring reacts on its own to keep your vehicle planted. The independent side-to-side action helps reduce body roll and sway when turning or carrying off-center loads. It also keeps the trailer more in line by cutting down on turbulence passed from vehicle to trailer, which helps everything track straighter on the highway.


There’s no air pressure to manage and no compressor to install—just bolt on the custom-fit brackets and hollow rubber springs with the included hardware. Once installed, they automatically engage as weight increases and then back off when unloaded. With no moving parts or air fittings to maintain, you get reliable support that stays ready for every haul without any extra setup or tuning.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the Timbren rear suspension enhancement system. This is a custom fit system. These brackets up here are going to be custom designed for your 1967 through 1999 Ford F-800, as well as your 2001 through 2003 Mack Trucks Freedom and your 1979 through 2000 Mack Trucks Mid-liner, as well as your 2000 through 2002 Ford F-650 and F-750.Now, obviously if you've got one of those bigger trucks like that. You're going to be using or you're going to be hauling a lot of weight Those are not just your weekend or fun kind of vehicles.
So you're probably doing some very heavy duty work related hauling. So having a suspension enhancement system like this is going to serve several different purposes. So one, as you put more weight in the back of your truck, obviously that's going to cause the back of the truck to sag down a little bit. Which can then kind of tilt the center of your vehicle so that more of the truck's weight is being put on the back axle as well.So that's going to cause the steering to become light as the front tires have less weight put on them. It can make the headlights come up and point into the eyes of oncoming drivers, which could cause hazardous situation.
But overall, it's just going to add more strain onto the backside of your vehicle on that back axle. So adding a suspension enhancement system like this is going to help a lot. Now keep in mind, this does not add any weight to your vehicles, gross towing weight. Think of it less as like a second set of hands, helping you lift more weight. Think of it more like a back brace so that it's not helping you lift anymore.
It's just giving you the support to lift what you can already lift so that you can maybe lift more, so help to increase the longevity of your vehicle, or just to make it more comfortable for you.Adding this is going to help to absorb some of the shock and jolt of your vehicle. As you hit a rough spots in the road, especially if you're really weighed down, you can bottom out and it gives you that jarring feeling as you're going along. So having this in there is going to help quite a bit.These are individualized rubber Springs or stops. So as you're going along, they are going to progressively contract. So if you have just a little bit of weight in there, they'll just contract a little bit, but the more weight you add, the stiffer they're going to get as the compressed down.
So it's going to create more and more support as you put more weight in there. But because these are individuals, they are going to work independently side to side. So if one is compressing, they're not both going to compress.So that's going to help increase stability, help provide a lot of support. Even if you are turning corners and different things helps to kind of reduce some of that body roll and sway. Especially if you have the tall load on the backside, like a dump truck or something like that. This is going to help to make sure that is going to be a lot more stable for you, help absorb some of that shock as you go over the bumps in the roads as I talked about.So these are going to fit with your vehicle. These are accustomed brackets. You're not going to have to do any sort of drilling or anything like that. All of the hardware is already included. So basically just get up under your vehicle, throw these in place and you'll be ready to go. It's going to just give you a lot more support so that it's a more comfortable ride help to bring up that sagging in the back so that your ride is safer and more enjoyable for you as you're hauling those super heavy loads. So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Ratings & Reviews

Kate F.
5/6/2026
Glad to hear the Timbren systems worked out so well for your RAM Van Mitchell! It’s great that you noticed the smoother, more progressive response compared to the factory bump stops, especially under load. Thanks for sharing your experience with both the front and rear installs, that’s really helpful for others considering the upgrade. What kind of loads are you usually hauling with your van?

Brooke M.
5/7/2025
Wow, thank you for sticking with us, Don! That is awesome. I think you made an excellent choice here. Timbrens are tough and the heavy duty are SUPER tough. Glad to hear these were a good fit. Love the photos! Is that your own property?

Don
5/21/2026
The TIMBRENs work as stated during when I am pulling anything heavy. However, when the truck is not pulling anything, anyone riding in the rear seat gets a very hard jarring jolt when driving over any roadway repairs, bumps, expansion joints on bridges. I wished that I would have went with the Super Springs, or the Road Active Suspension. I may replace the TIMBRENS later.


Robin H.
9/22/2026
Thanks for taking the time to share such a detailed review and all of the pictures! The unloaded ride is a concern we hear fairly often with SES upgrades, so your experience with the 1" gap and rough-road testing will be really helpful to others considering these for their F-250. We appreciate the kind words about Naomi and our team as well. Looking forward to your update once you get some miles on them with the Rockwood!

Heather A.
4/24/2026
Hi there, thanks for reaching out, that’s actually a common issue with this type of trim. The one you tried is a standard flat insert, but some RVs (like your NOBO) use a slightly domed trim to help it sit over the screw heads in the track. If the screws stick up even a little, a flat trim won’t fully snap in place, which sounds like what you’re running into. The best way to find the right replacement is to remove a small piece of your original trim, lay it flat, and measure the full width from edge to edge. Most are either 3/4" or 1", but the shape matters too, not just the width. If yours has that domed profile, you’ll want something similar or a softer vinyl that can flex over the screws. If you’re able to send a quick photo of your track or old trim, I’d be happy to help you find a better match.

Mike L.
4/23/2026
Niiiice, I see what you did there!! That looks like a sweet setup!


Mike L.
4/2/2026
Glad to hear they worked well for you Jerrod. Hope you had a good trip!

Mike L.
2/26/2026
Thank you Darrell, we're glad to hear your Timbrens are still on the job!

Kate F.
4/23/2026
Thanks for sharing your experience Thomas. It is great to hear the Timbrens made a noticeable difference in ride quality and reduced body roll on your E350 Class C. We also appreciate the heads-up on the install. That kind of real-world feedback about brake line clearance is very helpful for others working on a similar setup. Would be nice if they had a stronger option, if you need the 5K, might need to go to airbags, but who wants to deal with having to air up if you don't need to. Where are you off to on the next adventure?

Kate F.
5/6/2026
Glad we had the right suspension upgrade to help with the squat Dennis! How is the ride when you are unloaded?

Christopher H.
8/14/2026
Love hearing this! Really appreciate the detailed feedback and photos. That extra stability when you're loaded up can make a huge difference. And installing them at 11 at night—that's commitment. Hope they treat you just as well on those mountain roads. Safe travels and we'll definitely make sure Dee Dee gets the shoutout.


Heather A.
2/21/2025
Timbrens are the best for sag because they are made of dense rubber. 6500 lbs sounds like one heck of a travel trailer, what is it? Any fun plans this summer?


Jerome
3/2/2026
Awesome product. Would recommend.

Lazer S.
8/19/2026
Glad to hear they are working well for you, Ryan! Now that they are on, where you headed?

Christopher H.
9/3/2026
Happy to hear the Timbrens are making that big of a difference Tony. Thanks for including the photo and we appreciate the kind words! Have you taken any longer trips with the Timbrens installed?


Jesse M.
9/10/2026
Awesome! Glad to hear the Timbrens made such a big difference in the ride quality. Thanks for sharing! Happy travels!

Mike L.
4/2/2026
Thanks for the photo, Sid. Quite a bit of difference there!!

Mike L.
4/29/2026
Thanks for the excellent photos, Steven!

Lazer S.
6/16/2026
They definitely look like they are helping, Orlando! How are they when you aren't towing? We hear a lot of people say they can be pretty harsh when unloaded.

Nick S.
12/15/2025
I am glad to hear they helped with both the sway as well as the rear sag with the camper! Not adjustable like airbags but they do the trick. What kind of camper do you have?

Kate F.
7/13/2026
Bud, thank you so much for taking the time to leave a review! I'm glad to hear the suspension upgrade helped reduce the sagging and porpoising while towing. I also really appreciate you including the installation pictures and sharing your tip about removing the rear wheels. I'm sure that will help the next person tackling the install. Thanks again for choosing etrailer!

Heather A.
5/8/2026
I love to hear that David. I am glad the Timbrens are working out so well for you with the truck camper. That Rogue is pretty fancy, is it a pop up too?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Jay S.
8/14/2026
Now that its been a year Im very impressed with them. Theres no ride detriment without the 5th wheel attached and they do a great job of mitigating squat