bing tracking image
  1. Vehicle Suspension
  2. SuperSprings Intl
  3. Bump Stops
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Light Duty
THIS ITEM IS NOT A FIT FOR
1991 Dodge Dakota
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SuperSprings Intl

SumoSprings Solo Custom Helper Springs - Rear Axle

Part Number: SSR-311-40
In Stock
$287.99
Vehicle Suspension
Not Confirmed to Fit

1991 Dodge Dakota

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation. Great Prices for the best vehicle suspension from SuperSprings Intl. SumoSprings Solo Custom Helper Springs - Rear Axle part number SSR-311-40 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2554)
  • Q & A (0)
  • Videos (3)
  • Photos

SuperSprings Intl Vehicle Suspension - SSR-311-40

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 1,400-lb Load Support: Levels your ride under weight so steering and braking stay consistent.
  • Zero Maintenance Required: No air lines or pressure checks—just install and go worry-free.
  • Smoother, Safer Handling: Cushions bumps and limits sway for steadier towing and hauling.
  • Balances Uneven Loads: Each spring works independently to cut body roll on sharp turns.
  • Durable Urethane Construction: Resists oil, salt, and UV damage for long-term reliability.
Made in USA

Features to know about

Stay Level Under Load: 1,400-lb Rear Suspension Support

Heavy gear in the back can make your ride sag and throw off steering and braking. These SumoSprings Solo helper springs add up to 1,400 lbs of support at 50-percent compression to keep things level and steady. The sturdy microcellular urethane cushions bumps and helps your factory suspension carry the weight, so the rear stays up and the front tires keep firm contact with the road.

Comparison image showing SumoSprings Solo helper springs installed on a vehicle’s rear axle, with one spring uncompressed and the other compressed to demonstrate load support and suspension leveling performance.

Smooth Out the Bumps: Progressive Load Control

Every load feels different, and these springs automatically adjust. With lighter loads, they compress easily for soft engagement and a smoother ride. Add more weight, and they stiffen up—compressing by as much as 80 percent—to give firm support without harshness. That progressive load control means less bounce and sway whether you’re hauling tools or towing something heavy.

Stay Steady in Crosswinds and Turns: Independent Spring Action

When highways dip or side winds push against you, each spring works on its own to keep both sides balanced. This independent action helps reduce body roll in curves and keeps handling consistent even with an off-center load. You’ll feel more control through corners or when pulling into uneven ground.

Built to Handle Real Conditions: Durable Urethane Construction

These microcellular urethane springs are tough enough for real-world use. They resist oils, road salts, and UV rays, and they hold up from -25°F to 200°F. With minimal side expansion, they compress straight up and down so nearby components stay safe even in tight spaces. There’s no air pressure to check or lines to run—just maintenance-free support that keeps working trip after trip.

Quick Setup for DIYers: Simple No-Drill Installation

Getting extra suspension support doesn’t have to mean a long weekend under the truck. The SumoSprings Solo kit bolts in place with a straightforward, no-drill design. It’s a clean fit for anyone who likes turning wrenches and wants a permanent solution without air lines or adjustments.

Specs

Weight and Capacity

  • Weight capacity (at 50-percent compression): 1,400 lbs

Warranty

  • Limited lifetime warranty
  • 30-Day satisfaction guarantee

SSR-311-40 SuperSprings Sumo Springs Solo Rear Vehicle Suspension Kit for Vans

Installation Details SSR-311-40 Installation instructions

This Product Fits The Following Vehicles




Video of SumoSprings Solo Custom Helper Springs - Rear Axle
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Detailed Breakdown of the SumoSprings Solo Custom Helper Springs-SS35GR

Hey guys, this is Jake here with etrailer. Today we're gonna be talking about the density differences in the different colors of SumoSprings. More specifically, today we're gonna be talking about the blue line of SumoSprings. So just to compare each one to start with, the blue is going to be for your lighter, more frequent use. The black is going to be a more heavier duty, constant use, and then your yellow is going to be a more extreme duty, if you're constantly towing at the max capacity of the vehicle that you're using. To go over each one a little bit more and what case is best for each one, the blue one, which is why it's most popular, is going to be for frequent towing.

If you're towing like what we've got back here, a couple of buckets of salt or if you're going to the store to pick up a load of lumber or different building materials, whatever you're hauling, if you don't have a constant load on these, these are gonna be a great option. If you're wanting to put a set of SumoSprings on, say a sprinter van that's always loaded down with tools or maybe a rigging truck that's got a welder in the back, and you just want a little bit more support than what the factory suspension can supply, the black ones are gonna be a great option if they're always engaged. The yellow is going to be your most extreme option. So if you're pushing your vehicle to its max weight capacities, the yellow's probably gonna be what you're gonna want to go with because they're gonna supply the most support if you're at that max capacity. Now focusing more in on the blue set, they are going to be made out of a softer compound, which is why they're so ideal for people who are not towing all the time because the suspension on the vehicle is designed to be soft for a comfortable ride.

Well, if you go and throw a super stiff add-on spring on there, then it's gonna completely eliminate the fact that you had a softer suspension before. So when you put these on, they're going to help to absorb the shock rather than resist it like the other ones are. For when you hit bumps, this one's going to absorb it. It'll be a soft-cushion feel, whereas those are stiffer, so they're going to hit the frame, and you're gonna feel it transfer through the vehicle. Now, being made out of a urethane material, it's going to make it quiet but still harsh.

With the blue ones they are, like I said, they're gonna be much softer. If you're not towing all the time, these are gonna be a great option to add to your vehicle because you're gonna get the support when you need it and you won't even know it's there when you don't. Now, when it comes to installation, SumoSpring does a great job of making a custom install for each vehicle that you purchase these for. For example, we installed some on this 2020 Nissan Frontier, and this lower bracket is identical to the bracket that the factory jounce bumper was bolted onto. Except this one is going to be a little bit beefier, which is always a good thing.

You want the hardware to be able to support the add-on that you're putting on there. So depending on your vehicle, you can use our fit guide to find the right SumoSpring to fit your vehicle. Let's go ahead and take this over the test course and see how the suspension performs without our SumoSprings, and then we'll get them installed. Now to start off our test course, we're gonna start with just a couple of little bumps. Oh, you can feel a lot of sag in the back end of this truck because it's already compressed, so when we go over a bump there's not much more room to travel after that. When I'm hitting these bumps, the steering on the front feels very light. The steering wheel is kind of doing whatever it wants, and we're going at low speeds too, so this is not even a, not really a true example of what you might experience on the highway with high winds or anything like that to cause sway or any other problems you might have. But this is giving us a very good example of how soft the suspension is. Even with 450 pounds in the bed, that's, I mean, that's hardly nothing for what the owner of this vehicle typically hauls with it. He hauls a heavier trailer to do some side work here and there, and he's got usually about 400 pounds on the tongue or on the trailer hitch itself. So that's a lot more leverage than just in the bed of the truck directly over the axle. So in our little slalom here, driving back and forth, you can feel a little bit of body roll side to side. So hopefully those SumoSprings are gonna help out with some of that roll and help to get this suspension a little bit more dialed in and provides more support for us. Now with our SumoSprings installed in that same 450 pounds in the bed of our truck, take another measurement, we're at 34 and a half inches, so that's only a half inch of sag compared to the inch and a half we had earlier. Now with suspension enhancement, it's designed to provide some support not get it back to that factory ride. We want to have a little bit of sag because that's how we get the correct amount of weight on our ball mount or the tongue of our trailer. For when we are going over bumps is really when it's gonna count. We're not gonna have that same drop that we had in the first run. So let's go ahead and take it through and see how the support is with our SumoSprings. To start off our test course with our SumoSprings installed, we've got that same double bump. You can tell there's a lot more support in the rear now. Now these SumoSprings are still going to be relatively soft compared to a set of Timbrens or something a little bit stiffer, but you can tell, yeah, on that double bump there, it still has that softness that we want, but it's supporting it, and that's definitely what we're looking for out of this set. Now coming around a turn, we didn't have a whole lot of body roll before, but I can definitely tell it's a little bit more solid back there. I went over some small bumps in the parking lot, and I think it's handling quite a bit better than it was before. Again, we've only got about 450 pounds in the bed, so it's not a crazy heavy load, but it's definitely enough to engage our SumoSprings to really see how they work. Now the only thing is with this kit, you're not gonna have the adjustability like you would with a set of airbags, but for the example of this neighbor of ours that owns this vehicle, he doesn't need the adjustability. He's hauling the same load all the time, and it just so happens to be a decently heavy trailer that makes his truck squat a lot more than he feels comfortable with. So this set of SumoSprings is gonna work out great for him. These are gonna be made out of a microcellular urethane, which is essentially another term for foam that has tiny little air pockets in it that allow it to flex enough but also be stiff enough to provide that support. They are also going to be a progressive spring, so the more and more they compress the stiffer they get to provide that support. There are a couple options for jounce-style replacement springs on our website. I do like these a lot because there's other types out there that are much stiffer. They may be able to hold a lot more than these can, but a lot of trucks, such as the Frontier, they don't need that much support. These being rated for 1400 pounds is more than enough support for this Frontier and what it can handle. And the reason for that is, with those stiffer springs, you almost have to be loaded to half the capacity that they can carry in order for them to give you a comfortable ride. These being that softer urethane material, when you go over a speed bump or anything unloaded, you're not gonna feel a knock up against your frame because those other springs, when they engage, since it's such a hard rubber you'll feel it every time you go over a bump or anything like that. With these, you're not hardly gonna feel it because they are that softer material. These jounce-style bumpers are gonna be for the rear of your vehicle, but if you're looking for a front-end suspension enhancement, SumoSprings does make a variety of different products for different vehicles, so be sure to check out our fit guide to see what kits are available for your vehicle if you're having an issue with your front end. Hopefully this video was able to help you decide whether or not the Blue SumoSpring line is the right one for you.

Ratings & Reviews

4.7

2554 reviews
5 Stars
(2067)
4 Stars
(331)
3 Stars
(54)
2 Stars
(38)
1 Star
(64)
Review Sort Icon
by:
With the Blue Sumo springs installed, our ProMaster City sits a full inch taller in the rear when cargo area is empty. One important note: When removing the OEM bumper stops, for the ProMaster City the instructions that come with the Sumo Springs are not accurate. You can easily removed the mounting bolt holding the bumper stops in place by using a ratchet with an extension versus having to chisel around the rim to twist it off. Because of its height, the Sumo spring is always in contact with the frame, so there is noticeably less bounce, but a firmer ride with a little more road noise resonating through the ride.
by:
They look great on My 2019 Ram ProMaster City
Raised her up full 2 inches
Fast Shipping easy install for my mechanic
Thank you so much
by:
Springs installed properly. However they are not square. Both Springs on a slight angle I believe this compromises optimal performance
by:
Makes body sway go away. Wind is little problem with the van now.
by:
dodge Ram Pickup
Made my ram procity sit perfectly
by:
They've been great. Easy Install
by:
Very Small, Wished I'd purchased Largest Yellow Ones...
by:
by:
by:
2019 Ram ProMaster City
by:
2025 Promaster 2500 159” wheelbase. Backed the van on couple 2” X 6 “ easier sliding under. Sprayed PB Blaster on top of bumper spring, using a 16” Channel Lock, easy off with the old. At that time I jacked the rear end to allow clearance. One side at a time. Took longer for set up then the job. I used the long bolt with two spacers. Have not drove yet, though looking for great results.
Lazer S. profile picture
Etrailer Expert

Lazer S.

5/13/2026

Glad to hear the install wasn't too bad, Michael! Definitely let us know how the ride is once you take it out for a drive! What are you using your Van for? The tires look pretty beefy.

by:
2020 Jeep Gladiator
This only pertains to the order, shipping speed, and install as I have not put a heavy load on these sumo Springs yet but I feel like that's a foregone conclusion based off the reviews already. The ordering process, the shipping, and the installation was unbelievably easy. I kept rereading the instructions thinking this can't be right because it was so simple. I looked at the YouTube video and realized it is that simple! So happy with the ordering process, the quality of the initial product I opened, and how simple it was to put on the jeep.
Claire H. profile picture
Etrailer Expert

Claire H.

9/1/2026

That is the beauty of SumoSprings! Super easy to install and once they're on you can forget they're there! Are you planning on towing something with your Jeep that you want extra support for?

Justin profile picture

Justin

9/1/2026

@ClaireH yes Ms Claire. I plan to put a truck camper on the Jeep (that weighs in the 500-1000 lbs range). My payload is 1700 lbs so I know a camper of the weight will be significant my truck. Already ordered a stiffer rear anti-sway bar as well.
Claire H. profile picture
Etrailer Expert

Claire H.

9/2/2026

@Justin That sounds like a good plan! These SumoSprings plus the sway bar should be more than enough to handle the weight of your truck bed camper.
by:
2013 Jeep Wrangler Unlimited
I put these on a 2013 Jeep JK (not lifted) that tows a 3000 lb trailer in rough terrain; Total game changer.

These replaced the anemic factory stops (which had completely disintegrated) and make it impossible to 'bottom out' on the dips and holes that use to beat up the suspension. I got nearly all of my vertical travel back and the vehicle now sits almost level under high tongue load.

They go on pretty easy. I suggest sliding in one side, and then using a wooden dowel and hammer to pop the other side in the stock receiver cup.

Highly recommended. These are a MUST if you are towing a trailer (with a medium sized SUV) of any significant weight or if you just want to be able to bounce hard without bottoming out your suspension. I am likely going to get the front suspension version now as well.
Wish I knew these existed sooner.
Heather A. profile picture
Etrailer Expert

Heather A.

8/12/2026

Wow thank you for the glowing review Randall. It sounds like once you got them installed they are working out great. That sunset is gorgeous, where were you in this photo?

Randall profile picture

Randall

8/12/2026

@HeatherA This photo was taken in South West Colorado @ about 10,000 ft.
by:
2022 Ford F-150
Love them! The truck barely even squatted, had two dirt bikes, and a generator in the bed as well! It handles the bumps and sway great
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

5/20/2026

Looks like you were about to head off somewhere fun, Chad!

by:
2000 Nissan Leaf
Great product! Bought these for my 2000 7.3 f250. Didn't want something that is constantly active like ras or hellwig since my leaf springs are new and rated for 4k pounds. Installed these in 1 hr super simple only hard part was the factory bump stop on driver side was a pain. Didn't install the puck they give due to height of truck and I knew more or less at what point I wanted them engaging. I haul cattle to shows/ auctions or between pastures with my 24ft big bend and these things actually provided a smoother ride in my truck loaded then unloaded.they do a great job with the added support and are better than an overload spring with handling sway and providing a smooth ride loaded. Just wish I could use the 3k pound rated ones on this truck and my dually but doesn't fit if you have a gooseneck sadly so will probably have to go with timbs on the drw. Over all great product can't speak to longevity but solid for the time being. And customer service with this company is excellent if you have a question or problem they're on top of it...hope they pay them as well as the reputation they're building for them.
by:
2016 Toyota Tundra
It arrived pretty promptly about 30 minutes later I had him installed. It took me longer to find the proper Tools. Never had to remove the tires or wheels the only time I had to jack it up was to put the helper springs and screw them down very easily install
by:
Very easy installation. The improvement in handling is phenomenal.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/23/2026

Thanks for the awesome feedback, Jeff! Love hearing that the install was a breeze and that you noticed such a big difference in handling, that’s exactly what you want after the upgrade. Really appreciate you sharing the photos too, it’s always fun to see the comparison.

by:
2024 Chevrolet Silverado 1500
I put a set of 47s on my Silverado 1500 and towed my dump trailer that weighed 6000 pounds the way I had it loaded for 50 miles on all kinds of roads and it worked well. I didn’t use the spacers and the truck still rides like it did before the install.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

1/8/2026

Glad the Sumos are helping make your loads easier to tow!

by:
Jeep Gladiator Mojave - swapped out the rear stock bump stops with these. High quality parts. Just jack up the truck enough to give you room to work with and put in your jack stands, no need to remove the wheels. I look forward to seeing how they do with towing! Hopefully I can update my review here afterwards. Check out the gap difference in the pictures. Should touch sooner during normal drive conditions and hopefully help reduce some trailer squat and help towing to be smoother.
by:
Opted for the Blue 1000lb Sumo's w/spacer over the 1500lb Black ones. 1500 Silverado Max Tow & reduces squatting by 2" on a 1000lb+ tongue weight. Ride is still good, but you can feel the Sumo's engage over large dips or bumps which is not an issue for me.
Richard profile picture

Richard

2/12/2026

No issues. Towed a 27 Airstream around 4k miles &amp its all good.

Lazer S. profile picture
Etrailer Expert

Lazer S.

2/12/2026

@Richard Nice! Glad you are still happy with them! Was that all one trip, or multiple different trips?
by:
I got the springs installed last week and wanted to have a drive time before I wrote the review.

The height of the springs are perfect for my 2016 Tacoma, They keep the truck stable and nearly eliminate the body roll I had before installing them. I am heading to the mountains in a couple weeks, so I will update the review when I get back. That way I will know for sure the body roll is gone and the truck is stable on the winding mountain roads.

The springs installed in no time at all and since I had the rear end apart, I decided to add the leveling blocks at the same time, to keep the truck from squatting with the gear I haul around with me.

The guys at etrailer are great. And while I did not call them to discuss this item, they have been very helpful in the past with all my questions.

Below are pictures of before, a couple comparisons and after. Sorry if they come out sideways.

These Sumo Springs were a great addition to my Tacoma and well worth the money, IMHO.
Mike profile picture

Mike

7/31/2025

The springs are working exactly as expect. I have need up to the mountains numerous times and to Monerary to the Sea Otter bike fest. They have reduced the body roll and helped keep the truck stable on the mountain roads or when loaded down for camping. Im very pleased I added these Sumo Springs to my Tacoma.

Jon G. profile picture
Etrailer Expert

Jon G.

7/31/2025

@Mike We LOVE to hear reports like this! I've never been to the Sea Otter bike fest, but I looked it up online and it looks pretty cool! How many times have you gone to it?
by:
2016 Chevrolet Silverado 1500
Have Nissan NV 1500 (transit van).Loads and trailers were the problem-along with the constant "slouch" look-with no really heavy load on it. Hated that!
These used with "add-on leaf springs" made a world of difference.
Bumps being felt, are there, but nothing like before. These two things along with new shocks (all for back),has helped out so much!
So, the bumps have almost faded to "nothingness". Now granted, I have not hit a massive pothole, yet. I try to dodge those anyhow!
Components work great together!
by:
Got them installed no issues the reason for 4 stars is one side touches top of axle the other side does not no one could tell me if this was right or wrong also haven't pulled 5th wheel yet to feel the ride or handling so we will see thanks
by:
2021 Nissan Titan
I had installed this model SumoSpring on my 2019 4Runner and had great results when towing the camper I had at the time. They greatly reduce the bounce when going over dips in the road at highway speeds. Now I have a 2021 Titan and a bigger heavier camper. I expect the same great results on the Titan. Installation was pretty straight forward and took about a half hour. The size difference between the OEM bump stops and the SumoSprings alone should give a better ride when towing my camper.
Albert profile picture

Albert

7/16/2025

Still working like new. So much better than the factory bump stop.

by:
2024 Ford F-250 Super Duty
Definitely helps with squat on '24 F250 from boat trailer tongue weight. These do come with a plate to avoid uneven contact or wear.
I mounted using all spacers , stock is same unless speed bumps or large dips, u feel the stiffness/contact of sumo as expected. May take one spacer out .
Super easy to install , better than leaking bags.
Time will tell how they last
Lazer S. profile picture
Etrailer Expert

Lazer S.

9/16/2025

Glad to hear they are helping, Cory! If you are feeling them going over speed bumps, I think taking one of the spacers out is a good idea. Especially if that is happening when you are unloaded. Speaking of which, what are you towing?

Cory S. profile picture

Cory S.

9/19/2025

@LazerS 30' center consol 12,5k lbs on a dual axel trailer.
Lazer S. profile picture
Etrailer Expert

Lazer S.

9/23/2025

@CoryS Nice! I've been on a couple center console boats that moved faster than they probably should have! Grew up on and around boats in San Diego. There were some very "iffy" things done to make them faster. : P
25
2554
true
Show More Reviews

See what our Experts say about this SuperSprings Intl Vehicle Suspension

  • Recommended Rear Helper Spring Option for 2021 Ram ProMaster City Van
    Since the payload will affect the rear suspension only, I wouldn't worry about the front suspension. A front helper spring will typically be used to offset the weight from a front mounted accessory like a plow. For the rear suspension of your 2021 Ram ProMaster City, I'd recommend the SumoSprings Solo you'd looked at, part # SSR-311-40 which would provide you with 1400 lbs of support. This will be perfect for the 1000-1500 lb payload you spoke of. The other option would be an air helper...
    view full answer...
  • How To Fix Squatting And Inside Tire Wear On Back Axle Of 2018 RAM ProMaster City
    Hey Tyson! That's not good, but luckily it's fairly common and I have a good solution for you. I'd install some rear suspension enhancement on the back axle to keep it from sagging. Sagging is the primary reason your tires are doing that, and adding the SumoSprings Solo Custom Helper Springs # SSR-311-40 will fix this. It is a maintenance free solution, so you don't have to worry about airing them up or anything like the air bag kits. I have this same SumoSprings lineup on my Nissan Titan...
    view full answer...
  • Do You Have SumoSprings for the Front and Rear for My 2018 Ram ProMaster City?
    Hello Cesar, I really wish I could offer you both the front and rear, but for the 2018 Ram ProMaster City they do not make them for the front. You will want a set of the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-311-40. I know you were hoping for the yellow version, but for your ProMaster City the blue density is the only option available. The good news is the blue springs are actually a great fit for this van. They are a bit softer than the yellow ones, which helps keep...
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Mary K
Written by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Noah M
Updated by:
Noah M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.