DeeZee Hardware Series Truck Bed Tool Box - Side-Mount Style - Steel - 3 Cu Ft - White

Video Transcript for DeeZee Truck Toolbox - Side Rail Toolbox - DZ8748S Review

Speaker 1: Today we're taking a look at the DeeZee Hardware Series Truck Bed Toolbox. The unit is constructed of a 20-gauge steel construction, and it features powder-coated finishing on it, so it's going to look good for a long time; resists rust and corrosion. Now, this is available in white or black. I'm showing you the black one today. This is an L-shape design, so it's a side mount for the truck bed. Really nice, easy to use.

It really sets this toolbox apart from other models. The unit does offer the gas shocks, one located on each side. Really makes lifting and closing the lid very easy. So just a slight push here on the center. Latching design, paddle handle, and it opens up nice and easy.The unit does feature the self-centering latch, so that aligns perfect every time.

It can be adjusted if needed. And it has the locking stainless steel paddle handle with the guide plate, which provides security for your belongings. Two keys are included. Also, the unit offers secure weather-resistant storage for your gear. So it's a one-piece front, one-piece back, one-piece bottom, one-piece sides.

It's got really nice welds on it, so that provides a maximum strength and durability. And then it has the closed-cell foam gasket that creates a really nice tight seal; keeps out dirt, keeps out moisture.Pretty simple installation. It does come with detailed installation instructions to help walk you through the whole process step-by-step. The toolbox mounts along and sits above the side rails of your truck bed. Hardware to get everything installed is included.

And it comes with these feet, so there's gonna be four brackets; I just want to show you two of them. So, it comes with four brackets. Now, these are your stability feet. These attach to the truck bed floor and to the bottom of the box, offering support, and to keep the box in place. So basically what would happen is you would put them together like this, and then you can adjust them depending on the height that you need. You might have to drill some new holes. And then it comes with attachment hardware that secures to the bottom of the box and the floor of your pickup bed. So that's a nice design of the unit.Steel construction, powder-coat finishing on the legs, as well. Comes with all your necessary hardware, so you got a hardware pack here, and it comes with some adhesive foam tape. Just nice plush construction. This would be installed under the lip, so that way it adds a little bit of cushion at the mounting area as it sits on the bed rails, and it protects the bed rails from scuffing, scratching, any type of damage. The crown-style lid is extra strong, opens front to back, has a really nice hinge design; full length hinge, piano-style hinge. Nice durable construction all the way around on this box.Now, when it comes to the overall dimensions, I took a measurement from edge of lid to edge of lid that's the widest point that's 49-1/8" long. Back to front at the lid is 13-1/4". Just this body portion right here measured 12-7/8". And then top to bottom gave us an overall height of 11-1/4" tall. Now that base . so this base portion right here, edge to edge so, not including the lid is 48" long. This portion right here is 8-5/8" wide. And then this portion right here is 5" tall. So the height of the box above the truck bed rails, from this point here to the top of the lid, is 6-1/4". Now again, this L right here, again, 5". But this little piece right here measures 4-1/4". Capacity is 3 cubic feet. Again, easily lockable.Now internally, I took quite a few measurements internally. So, from this wall to this wall is 47-3/4" long. Here at the back, from the floor to the bottom of this lid or, excuse me, to the bottom of the lip is 9-5/8" tall. And then I did that same measurement here. I call this the shelf. So you have this shelf right here. So from the top of that shelf to the bottom of this lip, that was 4-1/2". Front to back, so back wall to inside of this right here, is 12-5/8". Front to back at the bottom, so the back wall to the up and down portion of that shelf, was 8-1/2".This product is Made in the USA, and it's covered with a Limited Lifetime Warranty. That gonna do it for today's look at the DeeZee Hardware Series Truck Bed Toolbox. Again, it's available in black or white.