bing tracking image
  1. Tie Down Anchors
  2. Buyers Products
  3. D-Ring
  4. Tie-Down Cleats and Rings
  5. Surface Mount - Weld-On
  6. Trailer Tie-Down Anchors
  7. Truck Tie-Down Anchors
Buyers Products 5/8" Forged D-Ring With Weld-On Mounting Bracket

Buyers Products 5/8" Forged D-Ring With Weld-On Mounting Bracket

Item # 337B40
lowest price pledge
Retail:$27.13
Our Price: $15.94
You Save: 41%
Tie Down Anchors
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.93 lbs
Quantity: 
In Stock
Tie Down Anchors 337B40 - D-Ring - Buyers Products
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Lowest Prices for the best tie down anchors from Buyers Products. Buyers Products 5/8" Forged D-Ring With Weld-On Mounting Bracket part number 337B40 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (19)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Buyers Products Tie Down Anchors - 337B40

  • D-Ring
  • Tie-Down Cleats and Rings
  • Surface Mount - Weld-On
  • Trailer Tie-Down Anchors
  • Truck Tie-Down Anchors
  • 6130 lbs
  • Buyers Products


Secure a load with confidence using the 5/8" Forged D-Ring from Buyers Products. It includes a weld-on mounting bracket made of AISI-1025 steel and has a working load limit of 6,130 lbs. D-rings are not approved for overhead use.


  • Steel construction
  • Maximum load (break strength): 18,390 lbs
  • Safe working load limit (WLL): 6,130 lbs
  • Ring diameter: 5/8"
  • Inner dimensional height: 3"
  • Inner dimensional width: 3"
  • Weld-On mounting bracket
  • Made in the USA

B40PKGD5/8 Inch Forged D-Ring with Weld-On Mounting Bracket

Replaces B40





Video of Buyers Products 5/8" Forged D-Ring With Weld-On Mounting Bracket

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Buyers Products Tie Down Anchors - Trailer Tie-Down Anchors - 337B40 Review

Speaker 1: Today we're taking a look at a Forged D-Ring with a Weld-On Mounting Bracket. Now this allows you to secure a load with confidence using the five-eighth inch forged D-Ring. The D-Ring includes a weld-on mounting bracket. The units are made from durable steel construction with plain finishing. The D-Rings are not approved for overhead use, so please keep that in mind.With this one you'll get a maximum load or break strength rating of 18,390 pounds, and a safe working load limit of 6,130 pounds. Again, the ring diameter is five-eighths of an inch.

A few measurements to go over with you real quick. The available space internally, edge to edge, is about three inches by three inches. External measurements is about four and one-quarter by four and one-quarter, and then the bracket right here, edge to edge, going in this direction is around two and a half inches. Edge to edge this direction, right around an inch and a half, and the overall height of that weld-on bracket is an inch and a quarter, right in that area.Again, it's made from durable steel construction with plain finishing, and the product is made in the USA.That's going to do it for today's look at the Forged D-Ring with a Weld-On Mounting Bracket.


Customer Reviews

Buyers Products 5/8" Forged D-Ring With Weld-On Mounting Bracket - 337B40

Average Customer Rating:  4.8 out of 5 stars   (19 Customer Reviews)


by:

It’s a weld in D ring




by:

I specifically purchased these D-rings as they are made in the USA. The pictures on the website show that the D-ring is embossed with USA on it. I am disappointed that the product I received does not have USA embossed in it. In the world of rigging (at least for overhead) if it doesn't say USA we do not use it. I double checked to ensure I received the correct product and product skew matches.

At the end of the day, these are oversized for my needs so they will work fine.


Comments
Thank you for your review. I did contact Buyers and this particular d-ring is manufactured in the USA.
-- Etrailer Expert Heather A - 03/05/2021


by:

This tie down is well made and heavy duty enough for the applications we needed it for. We would recommend this product and this company.




by:

Yep. I asked if the D rings they show on line are the ones they're sending me as I wanted to be certain of the product being mfd. in the USA. Better forging material and proper heat treating. They sent what they said. They are being welded to 1/4 inch steel framing on a flatbed. Needed the 5/8 inch diameter as some serious loads require secure bullet proof attachment points. Prompt delivery. Been a customer several times with them. No disappointments.




by:

Good tie downs still hanging in there




by:

product was delivered as advertised. But then, as soon as the order was made, I received an email letting me know that they "bumped" me from ground shipping to the next faster category without charge (who does that anymore?). The package arrived quickly, and in tact. Very satisfied customer.




by:

Great transaction as usual. This is not my first order from this company. And as the norm is with them very quick free shipping. Good prices and great products.




by:

Easy to install
Worked great




by:

Shipped fast, after one year still working good.




by:

D-Rings are great quality and work well.




by:

Well built, versatile, exceptionally st rong




by:

Arrived quick. Described correctly




by:




by:

Good quality,exactly what I expected




by:




by:




by:




by:




by:



19
19

See what our Experts say about this Buyers Products Tie Down Anchors



  • Thickness of Mounting Bracket With Buyers Products 5/8 Inch Forged D-Ring
    The thickness of the mounting bracket is 7/16" for the Buyers Products 5/8" Forged D-Ring With Weld-On Mounting Bracket # 337B40.
    view full answer...
    Image 1 for
  • USA Made D-Rings that are 3/4 and 5/8 inch in Diameter
    The Buyers Products D-rings are made in the USA like the part # 337B40 which is 5/8 inch diameter like you need and the # 337B46 which is 3/4 inch. These are also priced great too so they'd be a very solid choice for you!
    view full answer...
  • What Is The Distance Between The Mounting Holes On The Buyers Products 5/8" D-Ring 337B40MP?
    The mounting holes on the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket # 337B40MP you were looking at are 5" apart on center as shown in the included diagram. I included a video of Adam installing the # 337B40MP on a trailer for you to take a look at.
    view full answer...
    Image 1 for
  • Size and Grade of Hardware Included with Buyer's Products 5/8 Inch Forged D-Ring Tie-Down 337B40MP
    The 4 bolts included with the # 337B40MP are Grade 5, 3/8-16 x 2-1/4 inch, fully threaded. The back support bars are a nice feature that will prevent tear-out.
    view full answer...
  • Dimensions of Mounting Brackets of Buyers Products Forged D-Ring
    The mounting brackets of the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket # 337B40MP that you referenced are 6 inch by 1 inch. I would recommend using these on the other side of your truck bed when attaching these to a truck bed's floor.
    view full answer...
    Image 1 for
  • What is the Capacity of Buyers Products 5/8 Forged D-Ring 337B40MP
    The Buyers Products 5/8" Forged D-Ring # 337B40MP has a working load limit of 6,130 pounds. The break strength data was not provided. Usually the working load limit is a third of the break strength but again the exact figure is not provided. The capacity will also depend on what you have the D-ring mounted to. So for example if mounted to a steel frame you will likely be able to reach the WLL capacity. Attached to 1/2 inch plywood, not so much.
    view full answer...
  • Does Buyers Products 5/8" Forged D-Ring # 337B40MP Have Capacity for Transporting Rock Crawler
    The Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket # 337B40MP that you referenced has a 6,130 lbs working load limit which would easily be enough for a Jeep rock crawler. Especially when you consider that you'd be using more than one and one by itself would have more than enough capacity.
    view full answer...
  • Carriage Bolt Hole Mounting Dimensions For Buyers Products 5/8" Forged D-Ring # 337B40MP
    The mounting holes on the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket # 337B40MP are going to be spread 5" on center. This is the same from the top holes to the bottom holes and from the left holes to the right holes.
    view full answer...
    Image 1 for
  • How to Install the Buyers Products Hour Meter B40B45
    The Buyers Products Hour Meter part # 337B40B45 can be wired to any 10-80 VDC accessory that you need to monitor the run time on. It is primarily used for equipment maintenance and repair schedules. It will simply install inline on a power wire that leads from the power source to the accessory. For example, instead of running the accessory directly to the battery you would tie into the meter first and then run it to the battery which you can see in the attached photo.
    view full answer...
    Image 1 for
  • Tie Down Anchors Made In USA
    We have the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket # 337B40MP which is made in the USA. Most of the Tie-Down Anchors we carry are made overseas but there are a few exceptions with most of them being weld-on only. We also have the following weld-on options made in the USA: Buyers Products 1" Forged 360 Rotating 55 Angled D-Ring With Weld-On Mounting Bracket # 337B52 Buyers Products 1" Forged Steel D-Ring With Weld-On Mounting Bracket - 55 Degree Bend...
    view full answer...
  • Frame Mounted Forged D-Ring Tie Downs on Big Tex 70 Steel Car Trailer
    I can absolutely help you and make a recommendation. The floor of your Big Tex 70 car trailer is an 1/8 diamond steel plate. The 1/8 plate will be fine for a tie down point for anything but a car. You need a bracket not to fasten something down tight but to keep your car from moving. The rolling resistance would be too much for an 1/8 plate but sufficient for any type of other loads, like lumber, drywall, trash, pipe etc. You're going to need to drill into the frame to safely secure mounting...
    view full answer...
  • Recommended Trailer Tie-Down Anchor That Is Made In The USA
    I have another option for you, but most of our Tie-down anchors including the Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs # RR5K are made overseas. For an option that is made in the USA I recommend the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket # 337B40MP which has a 6130lb working load limit (WLL) meaning it will be plenty strong for securing your 2000lb tractor. I included a video of the # 337B40MP for you...
    view full answer...
  • Can Curt C45832 Tow Strap Loop Be Used to Tie Down a UTV
    The # C45832 strap loop itself has a 13K capacity, so the strength of this part itself wouldn't be an issue. If the combined capacity of the receiver hitches is greater than the 2370 lb dry weight of your UTV, this would be a good way of tying it down. If the receivers don't have that kind of capacity, I'd use a more traditional tie down setup like a couple of D-rings such as # 337B40MP and two ratchet straps like # BDW20325. You could rig it up as shown in the provided video.
    view full answer...
  • Torklift or Other Product for Holding Camper on a Flat Bed F-550
    I would use the Buyers Products # 337B40MP forged D-rings with brackets in the four locations where they are needed. You could install into metal deck framing, or into typical 2-by lumber materail which itself has been secured to the fram of the truck. Then you could potentially use 4 Cargo Buckle # IMF14069 tie down straps rated for 2200 pounds each. Not only would these hold a camper on the flat bed, but when the camper is out, these parts will help secure other loads. You will need...
    view full answer...

Do you have a question about this Tie Down Anchor?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tie down anchors for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down anchor information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010