Lippert GrabPad Permanent RV Jack Pads - 10" to 12" Feet - Qty 2

Part Number: LC585DV

$142.00

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

lippert rv jack pads 10 inch foot 11-1/2 12 octagon round grabpad permanent - to feet qty 2

Show All (1) Product Images

Show Fewer Product Images

Need help with installation?

Locate installers near me

When your campsite is uneven or the ground is soft, these stay-on jack pads help your RV settle into a stable setup. Spend less time placing loose pads each time you park. Great Prices for the best rv jack pads from Lippert. Lippert GrabPad Permanent RV Jack Pads - 10" to 12" Feet - Qty 2 part number LC585DV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Q & A (0)
Related Parts
Photos

Lippert RV Jack Pads - LC585DV

When your campsite is uneven or the ground is soft, these stay-on jack pads help your RV settle into a stable setup. Spend less time placing loose pads each time you park.

Highlights

Domed Articulation: Pads angle with uneven ground to help protect the leveling-jack feet from bending.
Load Distribution: Larger ground-contact areas spread RV weight to help prevent sinking in wet grass or mud.
Stay-On Clamps: Hardened spring steel clamps keep the pads securely attached to the RV during travel.
Adjustable Clamp Positions: Mounting holes let you shift each pad away from an interfering RV point.

Specs

Compatibility:

Jack-foot diameter: 10" to 12"
Jack-foot shapes: round, hexagonal, and octagonal
Lippert Titan Leveling footpads: compatible only without decorative covers
Excluded feet: smaller square stabilizer footpads
Retracted clearance: spring clamps must not contact a crossbar with the jack fully retracted

Configuration and Installation:

Pad size: large
Quantity: 2 pads
Domed articulation: up to a 5° angle
Clamp material: hardened spring steel
Attachment per pad: 4 spring clamps, 4 T-bolts, and 4 nylon locking nuts with 3/8"-16 threads
Tools required: measuring tape and 9/16" wrench or socket
Torque guidance: 15 to 20 ft-lb is adequate

Warranty:

Lippert limited warranty

Notes:

Support the RV according to its manufacturer before working underneath.
Use hand tools only. Do not use power or pneumatic tools, including impact guns or impact wrenches.
A retaining bolt protruding below the jack foot can concentrate load and damage the pad. Lippert does not cover damage caused by a protruding retaining bolt.
Do not attempt installation on a Titan jack with decorative covers. Attempting to remove the cover or footpad may damage the jack.
Before operation, inspect the installation and clear dirt and debris from between the ground and the pad.
Regularly check clamp-nut tightness and remove caked mud or debris before travel.

2025075888 Lippert GrabPad Large Stay-On RV Leveling Jack Pads - For 10" to 12" Jack Feet - Qty 2

No reviews

5 Stars		(0)
4 Stars		(0)
3 Stars		(0)
2 Stars		(0)
1 Star		(0)

true

See what our Experts say about this Lippert RV Jack Pads

Do you have a question about this RV Jack Pad?

Permanent Jack Pads for a Fifth Wheel With Six Leveling Jacks
Hey Brian! I recommend the Lippert GrabPad Permanent RV Jack Pads for your fifth wheel. These are designed to stay attached to your leveling jacks, so you won't have to put separate pads under them every time you set up camp. Since you have six jacks with 9" round feet, you can get all six using the following: -Lippert GrabPad Permanent RV Jack Pads - 8" to 9" Feet - Qty 4 # LC685DV -Lippert GrabPad Permanent RV Jack Pads - 8" to 9" Feet - Qty 2 # LC485DV The GrabPads use spring-steel...
view full answer...
Permanent RV Jack Pads to Prevent Sinking on Soft or Uneven Ground
Hey Mike! I recommend the Lippert GrabPad Permanent Jack Pads, available for 8"–9" jack feet in a 2-pack # LC485DV or 4-pack # LC685DV, and 10"–12" jack feet in a 2-pack # LC585DV or 4-pack # LC385DV They attach directly to your existing leveling jack feet using spring-steel clamps and stay installed even when you retract your jacks for travel, so there's no more placing and retrieving loose pads at every campsite! Their wider footprint helps prevent your jacks from sinking into soft...
view full answer...
Can You Use Different Size Lippert Jack Pads on the Same RV?
Hey Steve! You can absolutely mix GrabPad sizes on the same RV! You just need to match each pad to the size of the existing leveling jack foot. Lippert offers the GrabPads for 8"–9" feet in a 2-pack # LC485DV or 4-pack # LC685DV, and 10"–12" feet in a 2-pack # LC585DV or 4-pack # LC385DV. For example, if your front feet measure 12" and the rear four measure 9", you can combine the 10"–12" 2-pack with the 8"–9" 4-pack. All six pads stay attached during travel using spring-steel clamps,...
view full answer...

Do you have a question about this RV Jack Pad?

Info for this part was:

Written by:

Cody B

Edited by:

Anthony G

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.