See what our Experts say about this Optronics Trailer Lights

• Parts Needed For Adding A Lighted License Plate To The Back Of a Thule EasyFold XT Bike Rack
  To use the Thule License Plate Holder # TH35JV with the Thule EasyFold XT Bike Rack # TH903202 you will need to attach it to one of your bikes as the holder is designed to attach to either a vertical or horizontal bar. Since the Thule EasyFold XT Bike Rack # TH903202 already has holes for attaching a license plate you can simply attach your plate to the rear of the bike rack with the 2 screws provided. For a light if you are operating at night you can add the LED Light Bracket # OPT97FR...
  view full answer...
• Replacement LED Tail Light Options For Bargman 30-92 With Incandescent Tail Lights
  The LED Trailer Tail Light Driver # 328-003-81LBM1 and Passenger # 328-003-81BM1 are going to be the closest to the Bargman # 30-92-004 you currently have. These lights are all red and do not have provisions for the reverse light. Another option you might consider is installing LED Bulbs # ARC93FR and # DI52VR in your current tail lights so you will not loose the reverse light feature. Otherwise the Dual LED Trailer Tail Light # CE86FR is surface mountable and will allow you to keep your...
  view full answer...
• How to Power Optronics LED Trailer License Plate Light on Cargo Carrier
  The Optronics LED Trailer License Plate Light with Bracket # OPT97FR would normally be mounted to the surface of a trailer. The the only way to power this light using the Curt Auxiliary LED Indicator Lights # C53201 would be to splice into the running light wire which I would not recommend doing. Your other option would be to run a separate power line to the license plate light. There is no kit available that has a license plate light and indicator lights together for a cargo carrier.
  view full answer...
• Light And Plate Kit For A Thule T2 Pro XTR
  Hi David! I have a couple options for you, but Thule does not make a light kit specifically for the T2 Pro XTR, unfortunately. If you are ok with not moving the license plate, the Curt Auxiliary LED Indicator Lights # C53201 is an easy an inexpensive way to add lights to a bike rack. If you will be leaving your bike rack on full time though, I would recommend going with the next option. This will be more expensive and you will need to either drill into the rack or come up with a way...
  view full answer...
• Mounting Hardware to Hold License Plate Holder to Trailer
  Hello Danny. To install the Optronics LED Trailer License Plate Light with Bracket # OPT97FR onto you want to use the Steel Fasteners for License Plates and License Plate Frames - Standard - Qty 4 # CR80230, you might need to use a 5/16 inch bit to make the holes a little bigger. Then to put the license plate onto the holder you want to use the Hardware for Mounting Optronics License Plate Lights # LP52HP.
  view full answer...
• Looking For License Plate Light For Trailer With LED Light And At Least 22 Gauge Wire
  Hello Michael, thanks for reaching out. We do offer license plate brackets with built in lights. What I recommend is the Trailer License Plate Holder with LED Light # 328-003-71BE. I went out to our warehouse to check and I can verify it uses 18 gauge wire. I will list some other options for you below: - LED Trailer License Plate Light with Mounting Bracket - 3 Diodes - Clear Lens - Black Frame # 328-003-70BE - Optronics LED Trailer License Plate Light with Bracket - 1 Diode - Clear Lens...
  view full answer...
• Parts Needed to Add Separate License Plate Bracket and Light With Peterson Light Kit M540
  You can tap into the running lights(brown wire) on the Peterson Light Kit # M540 with a Tap # SWC502905-1. That will allow you to run 16 Gauge Wire # 16-1-1 to a Optronics LED Trailer License Plate Light # OPT97FR. You will be able to ground the negative wire to the steel frame, as your light kit uses the frame for the ground circuits.
  view full answer...

Do you have a question about this Trailer Light?