TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"

2016 Chevrolet Silverado 3500 - TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"

Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). Pre-drilled to accept camper tie-downs.

Features:

• Heavy-duty hitch lets you tow hefty loads, even when using a TorkLift hitch extension or weight distribution system (sold separately)
  • Max out the 30,000-lb capacity with TorkLift's specially designed Everest weight distribution system (TLWD1000 - sold separately)
• Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time
  • Compatible with industry-standard ball mounts and hitch accessories
• Truck-camper-friendly TorkLift design
  • Pre-drilled to accept TorkLift camper tie-downs (sold separately)
  • SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper
• Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability
• Hardened, reinforced hitch pin holes prevent elongation from wear
• Bolt-on installation - no welding required
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish resists corrosion
• Safety chain loops are built in
• 2 Hitch pins and clips included - hitch locks sold separately
• Custom fit for your vehicle
• Made in the USA

Specs:

• Top receiver opening: 2-1/2" x 2-1/2"
  • 2" x 2" Adapter sleeve included
• Bottom receiver opening: 2" x 2"
• Rating: Class V
  • Maximum gross trailer weight: 20,000 lbs
    • Maximum GTW when used with weight distribution: 30,000 lbs
  • Maximum tongue weight: 2,500 lbs
    • Maximum TW when used with weight distribution: 3,000 lbs
• Cross tube dimensions: 4" x 4"
• Lifetime warranty

With the SuperHitch Magnum, you get a 2-1/2" receiver for heavy-duty towing and a 2" receiver for standard towing. Add on the TorkLift Everest weight distribution system (TLWD1000 - sold separately), which is designed exclusively for SuperHitch hitches, and you can max out the 30,000-lb weight capacity of the hitch.

With 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time. And if you have a truck bed camper, this hitch has pre-drilled mounting points for TorkLift's super-sturdy camper tie-towns (sold separately). You can also add one of TorkLift's SuperTruss hitch extensions (sold separately) to extend the top receiver of the SuperHitch so that it clears your camper, allowing you to tow your trailer while your camper's installed.

Truck Bed Camper Compatibility

TorkLift is known for their truck camper tie-down systems and other camper accessories, so it just makes sense that they would have camper enthusiasts in mind when designing a trailer hitch. Each SuperHitch is built with integrated mounting points for TorkLift camper tie-downs, making it easier than ever to get a quality tie-down system for your slide-in camper.

The dual-receiver design of the SuperHitch also makes it easy to tow with your truck bed camper in place. The SuperTruss line of high-capacity hitch extenders is specially designed to extend the hitch receiver back far enough to clear your bed-mounted camper, while still allowing for an excellent towing capacity. An ordinary hitch extender can dramatically reduce your towing capacity. But each SuperTruss extension forms such a solid connection with the SuperHitch that the setup is able to maintain one of the highest weight capacities in the industry. When used with a standard weight distribution system, the setup can maintain up to a 10,000-lb weight limit, even with an extension that is 60" long. As a result, you can clear almost any truck bed camper and still do some heavy-duty towing.

Dual Receivers for Maximum Versatility

With the SuperHitch from TorkLift, you can tow your trailer and use a hitch-mounted bike rack or cargo carrier at the same time. This is thanks to the dual-receiver design of the SuperHitch.

Most trailer hitches have a single receiver. Typically, you can find an adapter or extension piece that will slide into your hitch to give you 2 receivers, but these adapters dramatically reduce both your towing capacity and your tongue weight, limiting how much you can tow, as well as how much you can carry with a bike rack or cargo carrier. Each SuperHitch is specially constructed to maintain a high weight capacity so that you can use the 2 receivers without sacrificing towing or carrying ability.

The SuperHitch Magnum features a 2-1/2" x 2-1/2" receiver for heavy-duty towing. Directly beneath this receiver is a 2" x 2" opening that is designed to meet your standard towing needs. Want to tow a trailer and carry a bike rack or cargo carrier at the same time? Just slide the included adapter sleeve into the top tube to convert it to a 2" receiver. This way you can use your 2" hitch-mounted accessories and use the bottom 2" receiver to tow a trailer at the same time.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff is available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.

C1211-30 Tork Lift Magnum 30K Super Hitch with 2 Receivers

Tech Tip

No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation , Hitch is designed to fit Long Bed models