We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13066

152 Reviews | 7 Questions

In Stock

$211.34

Retail:$326.95

You Save: $115.61

Not Confirmed to Fit

1999 Toyota Sienna

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch receiver - custom fit class iii 2 inch

curt trailer hitch for towing receiver - custom fit class iii 2 inch

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

2011 kia sportage trailer hitch curt for towing on a vehicle

2011 kia sportage trailer hitch curt class iii on a vehicle

2011 kia sportage trailer hitch curt class iii c13066

2011 kia sportage trailer hitch curt for towing c13066

2011 kia sportage trailer hitch curt for towing receiver - custom fit class iii 2 inch

Show All (5) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (10) Customer Images

Show Fewer Customer Images

Videos

How to Install the Curt Trailer Hitch Receiver on a 2014 Hyundai Tucson

Installation Guide for the Curt Trailer Hitch Receiver on a 2013 Hyundai Tucson

How to Install the Curt Trailer Hitch Receiver on a 2015 Kia Sportage

Install: Curt Trailer Hitch Receiver on a 2015 Hyundai Tucson

Setting up the Curt Trailer Hitch Receiver on your 2013 Kia Sportage

How to Set Up Your Curt Trailer Hitch Receiver on a 2011 Kia Sportage

Show All (7) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13066 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (152)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - C13066

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Standard 2" Receiver: Works with bike racks, cargo carriers, and Class III towing gear
Tows up to 3,500 lbs (GTW): Handles small campers, boats, or utility trailers with stability
Holds up to 350 lbs (TW): Supports heavy accessories without compromising safety
Bolt-On Installation: Mounts directly to frame with included hardware—no welding required
Rust-Resistant Finish: Gloss black powder coat over base coat helps prevent corrosion

Features to know about

Add Hauling Power Without the Hassle: Class III Strength with 2" Receiver

This Curt Trailer Hitch Receiver gives you access to everyday towing and hauling without needing a full-size truck. With a 3,500-lb maximum gross trailer weight rating and 350-lb maximum tongue weight rating, it’s built for small campers, boats, utility trailers, or hitch-mounted accessories. The 2" x 2" receiver fits the most common bike racks, cargo carriers, and ball mounts, so your gear slides right in and locks down securely.

Install It Yourself at Home: Bolt-On Design, No Welding Required

You don’t need a lift or specialized tools to get this hitch mounted. It bolts directly onto the vehicle’s frame using the included hardware kit—no drilling or welding needed. The precision, robotic welding makes sure everything lines up cleanly for an easy fit. Most folks can handle the install themselves with simple hand tools in a driveway or garage.

Built to Last Through Every Tow: Fully Welded Steel and Rust-Resistant Finish

The fully welded steel construction gives this hitch serious toughness for everyday use. It’s protected by a gloss black powder coat finish layered over a base coat for superior corrosion resistance. That means it’ll stand up to road grime, rain, and salt without rusting out or losing its clean look. The round-tube design keeps things looking tidy under the rear bumper while still being heavy duty enough for years of towing and carrying gear.

Specs

Receiver Opening

Receiver opening: 2" x 2"

Class Rating

Rating: Class III

Weight and Capacity

Maximum gross trailer weight: 3,500 lbs
Maximum tongue weight: 350 lbs

Warranty

Limited lifetime warranty

13066 Curt Class 3 Trailer Hitch Receiver

Replaces 13006

Installation Details C13066 Installation instructions

This Product Fits The Following Vehicles

2011 - 2015 Kia Sportage excluding SX models
2010 - 2015 Hyundai Tucson

Customer Satisfaction Score:

91% were satisfied with this product

9% of customers were not satisfied

Wrong item was ordered
Too difficult to install

9% of customers were not satisfied

Wrong item was ordered
Too difficult to install

4.9

152 reviews

5 Stars		(138)
4 Stars		(13)
3 Stars		(1)
2 Stars		(0)
1 Star		(0)

by: Raymond 07/27/2026

Received the hitch in great shape. Everything fit great and it bolted in place with no problems. Nice heavy-duty hitch. Looks great. Thanks!

by: Lewis z 11/10/2012

2011 Kia Sportage

minutes to install by myself. Had to acquire a torque wrench to finish it off, but that was only a $10 purchase. I have used the hitch twice now since my installation, and would recommend e-trailer to everybody, and anybody looking for a tow hitch. Forgot to mention it was 1/4 the price of the dealer, and you can barely tell it is on the vehicle.

Click to Enlarge

by: G-Hamilton 07/11/2023

2015 Kia Sportage

Curt Trailer Hitch Receiver. Easy order. Arrived on time. Super easy install!! Recessed under bumper. Shiny black. Hint: GET THE WIRE BRUSH TO CLEAN NUTS UNDER CAR !!!
LOOKS GREAT!!

Click to Enlarge

by: Frank E 04/17/2017

2012 Kia Sportage

Just recently bought a 2012 Kia Sportage that needed a hitch . Dealer ship wanted an extreme price to put a hitch on .
So I just did it my self . Very easy install it's just 4 bolts . If yours is an vehicle from the north a wire brush is a must to clean bolt holes .The videos are a big help if you are less mechanically inclined

Click to Enlarge

by: Tim R 03/19/2011

concise for my vehicle. The wiring took me 3hrs to get hooked up. what I like about it I did not have to cut into my car wiring harness, made the job easy and clean. once the electrical connection was done the hitch only took 30 minutes to mount. You do not need special tools to install the hitch. I was shopping around and etrailer was the only one to have the trailer wiring harness for my vehicle. very fast service and they keep you up to date on your order, Thanks.

Click to Enlarge

by: Craig 07/14/2022

2010 Hyundai Tucson

I looked everywhere for wire brushes to clean the hole underneath my Tucson. I could only find plastic. I spent hours cleaning 10 years of dirt out of the holes until I could get a bolt into the holes. I had to use a floor Jack to hold up the hitch so I could get the bolts started. It took me a few hours to finish the job.

Click to Enlarge

by: Pete 03/31/2011

a glove, installed and ready to mount my bike rack about 15 minutes after the UPS man left.. wish everything installed so easy - absolutely no swearing involved.
FIVE STARS!!

Click to Enlarge

by: Gman 364 09/02/2019

The trailer hitch and bike rack were exactly as described.It fit perfectly and was just what I needed.The instructions for the hitch said that the installation time was 15 minutes and I expected the worst and figured it would take over an hour. I spent more time unwrapping the the paper than the actual installation.20 minutes later it was clean up time.
Thank you for the great product!

Gman 3. One Year Later

9/5/2020

A year later it’s good as new

by: Paul 09/17/2018

2015 Kia Sportage

All necessary parts shipped.
Had trouble cleaning out nuts welded in frame. Two bolts went in after about
an hour of trying. Still waiting for the penetrating oil to free the rust and debri in the other two. This is NOT etrailer's fault. The installation would have gone very similar to the video if it were not for the frame-nut problem.
etrailer's customer service was very helpful.
Thanks

Paul One Year Later

9/17/2019

So far, so good. I use it mainly for a bike rack, but it has been used to haul a small trailer. I am pleased and would consider buying another one when I buy a new vehicle. Thanks

by: Brandon 05/27/2020

Very nice hitch. Took me about 20 min after unboxing and gathering the required tools to get it installed.
I bought this primarily to secure a bike rack to my Kia Sportage and it works perfectly for this purpose.

Brandon One Year Later

5/28/2021

Still working great for hauling my mountain bike around!

by: Kari 01/24/2021

Thank you Carol! I appreciate the amazing communication and your pleasant demeanor. You're so thoughtful and kind. Thanks for keeping me posted about my order and following up with me after I received it. The hitch fit perfectly! Best wishes to you all.

Thank you so much!

Kari Stockdale

Kari One Year Later

1/30/2022

700 miles towing a trailer without any problems!

by: John 06/09/2022 One Year Later

Hyundai Tucson

It was easy to install and has been super solid. It’s pulled my camper all over the west. And I think it makes our Tucson look more serious and capable.

Click to Enlarge

by: Michelle M 10/20/2016 One Year Later

2013 Hyundai Tucson

Hitch and wiring system. Very pleased with both products. The corner of the hitch receiver was bent when I received it, luckily the person installing it was able to make the adjustment. The hitch itself was too low, but that was my ordering error. The wiring harness was easy to install. Great company to deal with. I was able to call and speak to a customer service representative because I had questions originally. And what company follows up after a year, unheard of. I would recommend dealing with e-trailer. Very positive

by: Ron 06/03/2020

2015 Kia Sportage

The product arrived in a few days as advertised. The hitch looks well built, sturdy and well engineered. I put this hitch on a 2015 Kia Sportage. The only problem I had was with corroded threads in the existing welded nuts on the car. I could not get the bolts to take the thread even after soaking them with penetrating oil. The directions warned that this might be a problem so it was the 1st thing I checked. I drove to my local well stocked auto parts store (not one of the national chains) and bought a tap the same size as the nut threads, took it home and cleaned the threads. From the time I got home it literally took me 10 minutes to install the hitch. For the 2015 model I did not need to drop the exhaust. I just snaked the passenger side between the frame and the tail pipe, held up that side, ran a bolt in to hold it. There are no obstructions on the drivers side. It lifted straight up and into place. Using the slotted holes in the hitch, I adjusted it so it wasn't touching the frame anywhere and tightened the bolts. Done. Easiest hitch I've ever installed. The hitch does touch and deform the plastic rear bumper slightly, but doesn't cause any problem. Can't see it or hear it. So yeah. I'll get my next hitch from etrailer as well.

by: James 02/01/2021

Alex and etrailer were great . Hitch came day sooner than expected. Didn't like prices shops wanted so decided to DIY install. So with one good arm and hand (and one not good- stroke impairment) used a windshield sun shield to get on cold garage floor. Got hitch up and rested on tailpipe And used hitch cardboard packing box with a small chair cushion to put hitch on to raise it up some. After figuring best position to use good arm, was able to push a bolt up on passenger side and started. Put second bolt also-feeling cocky now. Did same on drivers side-actually harder side for me. 2 bolts finally- all done. Son saw it and said "YOU did that?"
Birthday 87 in April .

by: Kevin 05/10/2021

2013 Hyundai Tucson

I'm a bit creaky and I move slowly. I don't have a lift, and I didn't use jack stands. I had to make two trips back inside from the driveway (once for spray lube, once for a socket adapter), and I still finished installation in under 30 minutes.

At least 10 minutes of that was cleaning out the driver side weldnuts, which were a bit rustier than the passenger side. I highly recommend threading a bolt all the way through each hole before doing anything else.

The hitch hides well under the rear bumper, and look factory. I highly recommend it.

by: James 07/19/2023 One Year Later

We've had this for one year and it has been excellent. Installation was simple (aside from a problem that had nothing to do with the hitch). We use it exclusively for bike rack/cargo box/dirtbike carrier and have been very pleased.

by: Doug P. 11/03/2016 One Year Later

2015 Hyundai Tucson

Easiest hitch I have ever installed! It fit just as it should and was no problem to install at all. No drilling and no issue with clearance of body or muffler. Great product.

Doug P. One Year Later

11/3/2017

Still pleased with the hitch! No rust or any other issue

by: Mike 10/06/2019

2011 Hyundai Tucson

Have a 2011 hyundai tucson limited, hitch was easy to install, just 4 bolts. Fits great, really sturdy and solid. I had a second pair of hands during install but definitely not necessary. Didnt even have to jack up the car or move the exhaust pipe. Definitely recommend cleaning the mounting holes beforehand with a toothbrush or wire brush and some cleaner (i used wd-40, it works just the same) and screwing in the bolts halfway beforehand to test fit before you're balancing a heavy hitch receiver trying to get the threads to catch. No complaints so far, haven't used it to tow yet. 2

by: Carlos 04/25/2017

2015 Pontiac Trans Sport Van

Great Service from etrailer.com and perfect hitch. I received the order in few days and was a bit concern about the installation. The installation instructions indicated 15 min total installation time and I prepared myself to spend about an hour for this task. I did not have a car lift and with a help of a nephew, we installed the hitch in total 10 min. It fitted perfectly. Now I can transport my two bicycles without taking them apart. The hitch from etrailer.com is strong, non intrusive, discrete and works as intended. I definately recommend it.

by: David 06/03/2018

2015 Kia Sportage

Trailer hitch arrived on time. Package was in great shape, and well designed to protect contents.Had a friend help, and it only took about 15 minutes to install.Looks great, I would recommend etrailer to any of my friends. I will be using my hitch for a bike rack and a cargo carrier.

by: Rich B. 06/02/2012

2012 Kia Sportage

no jacking of the car. A ten minute job. I held the one end up with a small bottle jack and lifted the other side and installed the bolts. Went to the other side and attached the bolts, tightened and that was it. No joke! I also purchased the wiring kit. Easy!

by: Rich B. 06/02/2012

2012 Kia Sportage

no jacking of the car. A ten minute job. I held the one end up with a small bottle jack and lifted the other side and installed the bolts. Went to the other side and attached the bolts, tightened and that was it. No joke! I also purchased the wiring kit. Easy!

by: David S 09/13/2016

2012 Kia Sportage

I love buying stuff from Etrailer.com. The listed products are the exact fit for my vehicle. The on line instructions make it very easy to install. I installed the hitch and wiring harness in just under 2 hours. I will buy stuff from this site again

by: John B. 09/09/2017

2014 Hyundai Tucson

Glad I turned to etrailer.com for my purchase. I found the site to have suitable choices and the tutorials were great. Shipping was fast and I was able to find a local shop to install the hitch for an affordable fee. Turned out to be a hassle free transaction. I recommend the product and etrailer.com to others.

152

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Trailer Hitch and Towing Accessories Recommended for 2011 Kia Sportage SX Turbo Model
Hidden Hitch, Draw-Tite and Curt now make hitches that are compatible with the SX turbo model, although that wasn't always the case. I'd recommend the Curt Class III hitch, part # C13120 because it has the highest tongue weight capacity at 525 lbs and is the least expensive option. Curt makes a high quality product, so the fact that you'll save a dollar or three won't mean you have to compromise anything. If you'll be towing with the hitch, you'll also need the following accessories: Trailer...
view full answer...
Recommended Hitch for a 2015 Hyundai Tucson
I have a solution for you but the Curt Trailer Hitch item # C13900 will not fit your 2015 Tucson and even if it did it wouldn't increase your vehicles towing capacity. It looks like the 2015 Hyundai Tucson has a maximum towing capacity from 1,000 lbs to 3,500 lbs depending on the model. You can call a dealership and give them your VIN and they'll tell you yours. To add a hitch to your Tucson, I recommend the Curt Trailer Hitch item # C13066. This hitch is custom fit and bolts to your Hyundai...
view full answer...
Trailer Hitch Recommendation and Comparison for 2014 Hyundai Tucson
For your 2014 Hyundai Tucson there are a few options for trailer hitches. I would go with the Draw Tite part # 75717 as it has the highest capacities and best price but I can explain the differences too. The Curt hitches part # C13120 and # C13066 are both a fit too but these are different capacities. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch...
view full answer...
Curt Trailer Hitch Receiver For Carrying a Bike Rack On a 2014 Kia Sportage SX
According to Curt you will need their Receiver # C13120 since you have a 2014 Kia Sportage SX. They said their Receiver # C13066 which you have will not fit the SX trim. It does appear the SX has a slightly different rear fascia which is an issue with the other receiver. I do recommend installing the T-One Vehicle Wiring Harness # 118526 when you install the receiver. While you won't be towing these will power Auxiliary Lights # C53201. The auxiliary lights are often required due to the...
view full answer...
How Much do the Hyundai Tucson Trailer Hitches Weigh
The really good news is that the weight of the trailer hitch does not count against your towing capacities. Reason being that the hitch basically becomes a part of the chassis of the vehicle according to our hitch manufacturers. That said I'll give you the hitch weights for the 2 inch hitches we offer for your vehicle. The Curt # C13066 weighs 26 lbs. The Draw Tite part # 75717 weighs 37 lbs
view full answer...
Trailer Hitch and Wiring Recommendation for a 2015 Hyundai Tucson
Actually the Curt Hitch part # C13120 does not require the use of a stabilizer strap when carrying a non-supported load like a bike rack. The other Curt hitch part # C13066 that has been confirmed as a fit for your 2015 Hyudai Tucson would require the use of the strap since it is not rated for use with a weight distribution system. If a Curt hitch is not rated for a WD system then they recommend the use of the # 18050. If you have LED trailer lights the correct wiring harness would be...
view full answer...
Will the Curt Ball Mount Part # C45036 Fit a 2012 Kia Sportage with Class III Hitch Installed
Yes, the Curt ball mount part # C45036 that you referenced would fit the Curt Class III hitch part # C13066 you have installed on your 2012 Kia Sportage. This ball mount will provide you a hitch ball that has a 2 inch drop. I attached a help article on how to pick out the correct rise/drop ball mount for you to check out as well.
view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Video Edited:

Andrew K

Video Edited:

Joshua S

Video Edited:

Jacob T

Video Edited:

Andrew L

Video Edited:

Dustin K

Video Edited:

Zach D

Test Fit:

Nicholas E

Test Fit:

Randy B

Test Fit:

Robert C

Updated by:

Laura H

Updated by:

Rachael H

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Michael B

Updated by:

Isabelle B

Video by:

Alan C

Video by:

Chris R

Video by:

Aidan B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.