Hang your motorcycle or dirt bike helmet on this 5" long peg made of sturdy aluminum. Great for storing cords or other items as well. End piece helps to keep your gear in place.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, on our enclosed trailer, we're going to be installing the Tow-Rax helmet hanger, part number TWSPHHA. This hanger is designed to hang your motorcycle or dirt bike helmet. It's got a five inch long peg made of study aluminum. It's a nice, convenient rack to hang your helmet from or store your other items such as your helmet goggles, an extension cord, or an air hose. It's got a wide end cap to prevent your stored item from sliding off. It's made of a sturdy, light weight aluminum so the options for location of mounting and storage items are limitless.
Note that the hardware is not included. It's designed that you can pre drill your own holes so mounting, whether in your trailer or in your garage on the wall, you can secure it as necessary. We've gone ahead and pre drilled two holes and we're just going to use some self tapping screws to secure here to the side wall of our enclosed trailer. Now, once we've got it secured and it's fastened in place, we can hang a variety of items. We've got motorcycle helmet, dirt bike helmet, and then whether it's in your garage or your trailer, your regular household items such as an extension cord, perfect for this hanger. There you have it for our install and operation of the Tow-Rax helmet hanger, part number TWSPHHA for your enclosed trailer or garage. .
Average Customer Rating: 4.1 out of 5 stars (15 Customer Reviews)
Hang your motorcycle or dirt bike helmet on this 5" long peg made of sturdy aluminum. Great for storing cords or other items as well. End piece helps to keep your gear in place.Great product, fast delivery. Would recommend supplier to pre-drill holes in for quick mounting. Would purchase again.
Installation was not difficult, works perfect in my trailer. I can now hang my helmet and goggles up out of the way. Also EXCELLENT customer service in both quickness and accuracy. I just wish it had came with an extra sticker so I could have added to the outside of my trailer. Dave
Tow-Rax and E-Track are not the made by the same company, and that is why they are not compatible. I have included a link below that shows all the accessories that we currently carry that mount into E-Track system. For a similar set up you might be able to use the Rack'em Motorcycle Helmet Rack # RA-22
Rack'em Motorcycle Helmet Rack for Enclosed Trailers
$86.08, or their hook options such as # RA-11
Rack'em 2-Hook Multi-Tool Rack for Enclosed Trailers
$53.82, or the # RA-8
Rack'em Single Hook Rack for Enclosed Trailers
$31.33, but these to do not offer the E-track mounting style either.
Rachael H - 12/2/2014quality is good. decals are poor, all w rinkled
This particular hanger is not a sturdy as I thought it would be. I know it's sold as a helmet hanger, but I was going to use it to hang my leather race suit which weighs considerably more than just a helmet. The bar of the hanger is only welded in a few spots to the outer plates and I'm afraid that if I put that much weight on it it's going to bend because there isn't a weld at the most stressed part of the cross bar. I have seen other helmet hangers that have a fully welded bar and I should have just gone with one of those since they would probably hold more weight. Also, the edges weren't as finished as I had hoped either. They are pretty rough and will need some sanding to make them smoother. I did get a laugh out of the fact that the Tow-Rax brand is made by the company "Phoenix USA", but on the back of the part was a sticker that clearly says "Made in China".
This product is made in China. Very poor construction. Nothing lines up. If you set it on a flat surface it wobbles. Even the decal on the front is crocked. I will not buy anything made by Tow-Rax again.
Easy to install, sturdy. Etrailer delivers fast with great customer service and follow up
Good product. It was delivered very quickly. Good experience.
I like the looks of them, but they need to be welded on each side as they busted and had to be re-welded.
I’m a fabricator by trade and just ordered this to get free shipping on another item. This is a very simple design and pretty flimsy but I’m sure I can hang a helmet on it until the 2 tack welds break and then repair it with a bigger weld.
Another good piece at a looow price.
great product
Love it. Everything the video said it was. Holds my helmets perfectly.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.