To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Some covers get in the way when you need to haul something tall. This one rolls up completely so you can use your whole bed without taking it off. It uses hook-and-loop fasteners along the side rails to stay tight and secure while driving. When you’re done, it unrolls smoothly and latches at both sides of the tailgate so you can close up and go in seconds.
Rain and road spray are no problem with this cover. Built-in weather seals block water from sneaking in around the edges, so you don’t need extra drain tubes or complicated plumbing. It keeps your gear dry and protected through storms or car washes while still being easy to open and close.
A sagging cover doesn’t just look bad—it can flap in the wind or collect water. The manual tension control system lets you dial in a snug, even fit across the bed so the vinyl stays smooth and quiet at highway speeds. It also keeps that low-profile look just 1-1/4" above the bed rails.
Installing a tonneau cover shouldn’t take all day or require drilling holes. This one clamps right inside your bed rails with aluminum side rails and bows for a sturdy, lightweight frame. Once in place, the textured matte black vinyl gives it a clean finish that looks good on any truck and stands up to everyday use.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, Matt with etrailer, and today we're talking about the line of etrailer soft roll-up tonneau covers. And this is gonna be on our GMC Sierra today, but this is going to come in multiple variations or fits, so what I recommend doing, is just plugging your vehicle's information into our fit guide to find what's gonna be the best fit for you. This is gonna be a soft roll-up tonneau cover, and you're mainly gonna have two types, and you're gonna have your hard tonneau covers and your soft tonneau covers. Your hard tonneau cover is gonna be more for security. So if you have anything really important in the back, this would keep those items secured so no one can access them. While the soft tonneau cover like we have today, is just gonna keep things more out of sight and outta mind.
So, I'd recommend keeping things less valuable back here, but it's also gonna be a lot easier to work with, being able to roll it up completely, save a little bit of extra space, and it's still gonna give you a lot of the same benefits giving you a clean finish on top of your truck, and we're gonna help you with that fuel economy too. This is a roll-up style, (tailgate thudding) so, how that's gonna work is you're just pulling these levers, (cover thudding) and release this. And since this is soft too, (fasteners scratching) it really binds into itself really nice. (fasteners scratching) You really start to notice it at the very end when I have it right here next to our truck, or the cab of our truck. And how that's gonna operate is when you have any boxes, maybe you wanna push all the way back here, this is gonna have the ability to really push into itself.
So if you are a little crammed for space, you should should still be able to maneuver this a little bit. And you're gonna secure this down. You have a couple buckles that you'll just wrap it around and secure to the other side. And this is how it's gonna be when you're in the open position, (buckle clicking) and you can tell this gives you a really good fit. I only have one one on right now, but I'm not worried about securing this at all.
(buckle clicking) And if you need to tighten it down a little bit more, if you've noticed things have shifted a bit, you can just adjust these buckles and give this a tight fit. If you are looking at soft tonneau covers, you're gonna have two choices. You're gonna have those fold-up options and you're gonna have those roll-up options. Both of them are gonna give you that protection on the back of your bed from any elements from outside, like rain, and they both are gonna give you more of a clean finish on the back of your vehicle too. Now, one of the major drawbacks to a fold-up tonneau cover is you're only gonna have two thirds of your bed that you can really use or access.
The roll up tonneau cover really solves that issue because it's gonna be able to roll up into itself, giving you a lot more bed access. And it's really my choice of a roll-up tonneau cover, because like I just said, it's gonna give you more room. We can take a deeper look at how this is all gonna work. So we're gonna have these clamps that are gonna attach your rails, to your bed rails. And what I really like about these clamps is they don't require any tools. It's just a knob on here (knob clicking) that you tighten up. And so if you ever needed to remove your entire tonneau cover, you wouldn't need any tools to do that. And how those rails are gonna sit on top of your bed rails, if you notice at the very back, we're gonna obstruct our stake pockets just a bit, so if you are wanting to use these, this might be an issue for you, so definitely reassess what accessories you have. And right next to that, we're gonna have this tensioner. I'm a big fan of this tensioner because with a vinyl tonneau cover, it's eventually is gonna start to stretch, that's with any soft type of tonneau cover. So what this does is you can adjust this really easily to help keep that tension on your cover. And you can really see what I'm talking about when I start to unroll this, (cover flopping) because right now it looks pretty loose, you can see a lot of wrinkles in the tonneau cover itself, but once I get to the very end, the way this is gonna really seat into (tensioner clicking) that tensioner, it's gonna tighten itself up. Removing all those wrinkles. Giving you that more smooth look on top. And afterwards, just come back through the sides and apply pressure to the hook and loop system we have on our bed rails, so we can really secure our tonneau cover to the rails. I know I talked about this being weather resistant, so let me show you what I'm talking about. So we're gonna have this rubber seal at the very end of the tonneau cover that'll press up against your tailgate. And next to that we're gonna have these foam gaskets on our corners, along with some additional padding going down the sides. And one of the things I really like about it is we're gonna have these aluminum rods that go all the way across, and kind of makes this bow up a little bit, and that's gonna help with water runoff so you don't have it pooling on top of the cover. Now no cover is completely waterproof. You're always gonna get a little bit of water getting into your tonneau covers, but I think for this one being a soft tonneau cover, it's gonna do a really good job with it. This is actually one of our coworkers, Dan's truck, and he's been driving around with this tonneau cover for a bit. He really likes it, especially with the amount of water it is keeping out. And it is flapping around in the wind just a little bit, but that's gonna be something you face with any soft tonneau cover, 'cause as you can see, just that material is just gonna wanna really move to any high winds you drive through. But that's pretty common with any soft tonneau cover. And honestly, I think the soft roll-up tonneau covers are gonna do most people just fine, because if you are just looking for that basic weather protection, this is gonna get the job done. Well that's just a look at the line of etrailer soft roll-up tonneau covers. Thanks for watching.
Ratings & Reviews

Kate F.
7/13/2026
New cover looks great Randy!

Nick S.
1/19/2026
I am glad you are liking the cover overall. Good catch on the latch by the cab, Velcro has been my go to solution as well. It looks great fully installed as well.

Heather A.
5/26/2026
Wow that looks great John! What are you using the cover for?

Lazer S.
10/12/2026
Glad to hear it wasn't too difficult to install, Andrew! Out of curiosity, what was the old cover you wanted to use the rails from?




Randy N.
9/20/2025
After a year of use and traveling, this tonneau cover still looks and fits like brand new. I will purchase this cover for my next truck rather than one from the dealership.

Ryan
5/6/2026
I have had the roll up cover on for about 2 years now, and it is still holding up great. I am still very satisfied with the price and quality.

Brooke M.
4/8/2025
Looks OEM! Thanks for sharing a photo, Shane - do you have any install tips or tricks you learned along the way?

Larryw -.
12/27/2025
Generally speaking the cover had been very good, I will go with 4* however the cable that pulls the latch, in order to rollback the top cover had broken, And I contacted etrailer to see what could be done and they were clueless. So I had to take it upon myself to get my own cable and a cable crimp and fixed it myself. There was no compensation for warranty unless I sent the whole thing back, and to be honest thats 100 percent BS.

Bill
9/20/2025
After a year the cover is working just fine. I like how it rolls up to the cab allowing full visibility through the rear window. And I can use the full truck bed when required.

William
5/5/2025
One year in, and this cover is holding up well. Ive only adjusted the tension once. No rot, sun fade or tears I park outside 247. It rolls up out of the way so I can have full use of the bed. No complaints.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Mike L.
5/11/2026
Good job Troy, the tonneau cover looks great on your truck!