Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2007 Chevrolet Impala
We'll connect you with nearby partnered installers who know this exact setup.
RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black
Part Number: RT80323
In Stock
$2,349.99
Retail:$2,499.99
You Save: $150.00
2007 Chevrolet Impala
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (75)
- Q & A (0)
- Photos
Retrax Tonneau Cover - RT80323
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Keeps Gear Secure: 1" thick aluminum panels lock anywhere along the rails for theft protection.
- Full Bed Access Fast: Retracts into a small canister so you can haul large items anytime.
- Stays Dry and Clean: Foam seals and drain tubes route water out to keep cargo protected.
- Smooth One-Hand Use: Pop-up locking handle slides easily on sealed ball-bearing rollers.
- Built to Last: Matte, scratch-resistant aluminum holds up to 500 lbs evenly distributed.
Features to know about
Smooth Cargo Access: Retractable Aluminum Design
Getting into your truck bed shouldn’t be a chore. The RetraxPRO MX moves on sealed ball-bearing rollers, so it glides open and closed without binding or needing grease. You just pop up the handle and slide it with one hand. The 1"-thick aluminum slats retract into a compact canister that sits at the bulkhead, keeping the cover out of the way and leaving your full bed open for larger loads.
Secure Storage: Lockable at Any Point
When you want to protect what’s in your bed, you can lock this cover anywhere along the rails. That means you can close it partway to shield smaller gear while carrying taller cargo near the tailgate. The flush-mounted locking handle hides under a flat lid to keep dirt out and keep thieves guessing. Closed and latched with your tailgate locked, it forms a solid barrier that can’t be pried up or cut through like soft covers.
All-Weather Defense: Sealed Aluminum Construction
Rain, snow, and road grime stay outside where they belong. The RetraxPRO MX uses weather stripping and foam seals around the rails, plus an overlapping top panel at the tailgate, to block moisture and dust. Two drain tubes route any water that gets into the canister back out through factory bed drains. Reviewers describe it as “almost waterproof,” which is high praise for a retractable cover.
Built to Take on Heavy Loads: 500 lb Capacity
These 1" aluminum panels are tough enough for real work—rated for 500 lbs of evenly distributed weight or heavy snow without sagging. The matte black finish resists scratches and fading, keeping its streamlined look year after year. Even the canister is designed smartly with a spiral track system that prevents the panels from rubbing together when rolled up, cutting down on wear over time.
Clean Look, Easy Setup: Low-Profile Rails and No-Drill Install
The rails sit just 1" above the bed for a low profile that blends in instead of standing out. Installation is simple—bolt-on clamps secure the rails with no drilling required, and the preassembled canister drops into place. Once mounted, the cover rolls flush across the bed for a sleek finish that also helps smooth airflow when closed.
Specs
Weight and Capacity
- Weight capacity: 500 lbs evenly distributed
Dimensions
- Canister dimensions: 13-1/2" deep x 12" tall
Warranty
- Limited lifetime warranty
80323 Retrax RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte
This Product Fits The Following Vehicles
- 1999 - 2016 Ford F-250 Super Duty 8 Foot Bed
- 1999 - 2016 Ford F-350 Super Duty 8 Foot Bed
- 2008 - 2016 Ford F-450 Super Duty 8 Foot Bed
Ratings & Reviews
4.6
75 reviews
by:
Timothy
04/06/2024
I got the replacement cover quickly and I installed it soon after. A great asset for my truck.
by:
Jesse
01/13/2026
dodge
Ram Pickup
The instructions were definitely lacking—ended up finding a decent YouTube video. The box itself wouldn’t fit between the rails on the inner sides of the bed (see pics), so I had to use prybars to seat it past the rails.
Functionality: seems very solid once installed and rollers help it slide easily either direction. I’m not convinced it’ll hold much water out, but that’s partly due to the ram box hinges next to the tonneau rails, then not a lot of pressure between the tonneau and the top edge of the tailgate. I also had a $500 tonneau in the past with weather stripping along the front box to scrape debris from the top side of the tonneau as it retracts into the box at the front of the bed. This doesn’t have that, so it seems debris will accumulate inside the box and I’m not sure how easily it will be to clean inside the box.
Time will tell if this is worth the price tag, but it does feel very sturdy once installed.
Functionality: seems very solid once installed and rollers help it slide easily either direction. I’m not convinced it’ll hold much water out, but that’s partly due to the ram box hinges next to the tonneau rails, then not a lot of pressure between the tonneau and the top edge of the tailgate. I also had a $500 tonneau in the past with weather stripping along the front box to scrape debris from the top side of the tonneau as it retracts into the box at the front of the bed. This doesn’t have that, so it seems debris will accumulate inside the box and I’m not sure how easily it will be to clean inside the box.
Time will tell if this is worth the price tag, but it does feel very sturdy once installed.
by:
Mark
06/24/2026
Received my order in a timely manner. It was an easy install. I’m 65 years old and was able to install by myself.
Kate F.
6/25/2026
Well Mark, 65 is the new 30! The new cover looks great, I really appreciate you including the pictures as well =)
by:
Dennis
10/10/2024
2025
GMC
Sierra 3500
I was hesitant to try a canister type roll up bed cover after only having hard covers or a soft roll up above bed cover before. I'm glad I did...
It still gets 5 stars because even though the box for the rails was damaged, no parts were missing and there were no dents or scratches on any of the pieces.
The install was easy, did it by myself in a couple of hours not rushing to get it done but working at a leisurely pace. The only time I needed help was to position it in place after the side rails were attached. The part that took the longest was measuring and adjusting the width between rails from the front to the back to get them within spec so the cover moves smoothly and easily with no binding. The instructions were easy to follow and it is simple to put together and install. Just take your time measuring between the rails and it will glide effortlessly.
I like the size of the canister, it doesn't take up much space at the front of the bed, even though it has 8ft to roll up. It seems as if it will be pretty water repellent with the rubber seals and gaskets. It rolls up easily and doesn't retract fast and slam into the canister. It also rolls out easily all the way to the tailgate. Unlike previous covers I have had, this one doesn't require the tailgate to be closed to work properly. The cover can be extended all the way to the tailgate and you can open and close the cover or tailgate independently of one another. I also chose this particular cover because it had the anywhere lock feature rather than only a few set locking points. The matte aluminum is a nice clean look, and it seems like it will be less prone to sagging in the middle as time goes by. This particular model sits just a little above the bed (the bed cover rails sit on top of the truck bed) but the canister isn't any higher than the rails or the cover itself when its open or closed. It looks seamless and clean.
It's only been a few days since install but as of now, I couldn't be happier having chosen this bed cover. And as always, etrailer makes the ordering process easy and worry free with their vehicle specific fit, fast shipping and fair prices.
It still gets 5 stars because even though the box for the rails was damaged, no parts were missing and there were no dents or scratches on any of the pieces.
The install was easy, did it by myself in a couple of hours not rushing to get it done but working at a leisurely pace. The only time I needed help was to position it in place after the side rails were attached. The part that took the longest was measuring and adjusting the width between rails from the front to the back to get them within spec so the cover moves smoothly and easily with no binding. The instructions were easy to follow and it is simple to put together and install. Just take your time measuring between the rails and it will glide effortlessly.
I like the size of the canister, it doesn't take up much space at the front of the bed, even though it has 8ft to roll up. It seems as if it will be pretty water repellent with the rubber seals and gaskets. It rolls up easily and doesn't retract fast and slam into the canister. It also rolls out easily all the way to the tailgate. Unlike previous covers I have had, this one doesn't require the tailgate to be closed to work properly. The cover can be extended all the way to the tailgate and you can open and close the cover or tailgate independently of one another. I also chose this particular cover because it had the anywhere lock feature rather than only a few set locking points. The matte aluminum is a nice clean look, and it seems like it will be less prone to sagging in the middle as time goes by. This particular model sits just a little above the bed (the bed cover rails sit on top of the truck bed) but the canister isn't any higher than the rails or the cover itself when its open or closed. It looks seamless and clean.
It's only been a few days since install but as of now, I couldn't be happier having chosen this bed cover. And as always, etrailer makes the ordering process easy and worry free with their vehicle specific fit, fast shipping and fair prices.
Dennis
10/12/2025
After about a year owning this cover, I still would buy it again. If you set it up right in the first place, it will work flawlessly. The locking mechanism still works great. The rolling part still works great. Aside from a solid cover, this is the most secure cover I have ever had. It does get some drips of water inside after washing the truck but its not enough to worry about, even if you had a bed full of stuff.
by:
Cathy
08/31/2026
2026
Ford
F-450 Super Duty
This is a very sturdy tonneau cover and looks great on our 2026 Ford F-450. The materials and build quality are top-notch. The installation is straightforward, and I recommend you watch the video(s) prior to performing the installation. The unit is heavy, and you will need a strong helper. This is our first hard tonneau cover, and we are very pleased with our purchase.
by:
Michael
08/06/2026
2026
Ford
F-450 Super Duty
The shipment was supposed to be delivered yesterday, so I stayed home from work to receive it. I live on a busy street in St. Louis city, or a corner lot. The instructions were to deliver it around back to the garage door. It finally arrived after 9pm on the front steps, which are within 8 feet of the sidewalk. Good thing it's so heavy and it didn't "walk off".
by:
Sam
07/15/2026
2026
Toyota
Tundra
Should put actual installation instructions with the product inadition with the on line.Something was catching when attempting to operate. Semes to work ok after it broke free.
by:
Bob
11/02/2025
2024
Ram
3500
Nice product. More difficult to get the rails attached than it should have been. Very glad I had 2 strong guys helping me.
Love the results.
Love the results.
Nick S.
11/10/2025
It looks great on your truck! I am glad you were able to get it installed with a little help.
by:
Michael
11/30/2025
Ram
3500
This was a really easy installation. 2026 GMC 3500 DRW. I did it the install myself pretty quickly (except for lifting the combined rail/cover into the truck). One person on each side to guide and lift while my daughter lifted the weight in the middle of the bed worked well. The few connection screws required fit easily. Seals at the front of the truck and on the tailgate are smooth and complete. I didn't make both sides parallel when first installed. I loosened the middle and tailgate ends of the rails, adjusted the spacing distances, and it's perfectly in align now. One person can very easily expand and contract the top. The two drain hoses won't fit the holes in the truck bed. I'll pickup something from Home Depot or Lowes to append a reducing method. I really like this bed cover!
Nick S.
12/1/2025
That is great to hear! I am glad you were able to get this installed easily with a little bit of help. I am sure you will like this cover over time. Are you using that new truck to tow anything?
Nick S.
12/2/2025
@Michael That is awesome! You'll have to let me know how those work as well.
by:
Scott
04/24/2026
2026
Ram
3500
Quality product. Bought to protect and hide fifth wheel hitch. Does a great job!
by:
Laura970
09/07/2024
The tonneau works well. I wanted something that would be pretty secure (aluminum and locking) and easy to open/close. It is all those things! One handed open/close. Few pieces that are below the cover level so it doesn't interfere too much with what you have in the bed. Install was ok - definitely two people are easier than one.
Two downsides. The roll up area does take bed space - more than I'd like. Also, it is not watertight. Not terrible in the rain, but a good downpour or car wash gets water in the bed.
Two downsides. The roll up area does take bed space - more than I'd like. Also, it is not watertight. Not terrible in the rain, but a good downpour or car wash gets water in the bed.
Laura970
9/8/2025
So on the plus side, love how it opens all the way up. When were loading the bed for travel, I need it fully open. Downside is the amount of room the canister takes up and the water as previously mentioned. Still quite easy to use!
Nick S.
9/9/2025
@Laura970 I am glad it is working well for you on some aspects. I am wondering if the weather stripping or seal is bad. Have you noticed certain areas where the water leaks in more than others or is it pretty difficult to tell when it rains?
by:
Robin N
07/02/2016
2001
Dodge
Ram Pickup
On my previous truck, we had installed a soft snap-on tonneau cover. While it looked great, its performance over time decreased significantly, particularly in cold weather! So this time around, I decided to splurge and purchase a high-quality roll-top hard cover. I am SO HAPPY that I did! As importantly as its ease of installation and use, it is lockable so I will no longer have sleepless nights while traveling, worrying about the items in the truck bed. eTrailer was a great help in expediting the delivery of this item, as my HOA requires pickup trucks to have their beds covered... Thank You!
by:
Ronald E
08/29/2026
2022
Ford
F-350 Super Duty
It’s seems high quality but this review is too soon to tell . I would rather give reviews after a few years of use but for now the product seem exceptional. It was just I stalled today.
by:
Michael
08/24/2026
Easy enough to install and looks good. Works as I’d hoped and just need to see how it holds up in the Midwest winters ??
by:
Jeffrey
04/13/2026
Item came on time and was very easy to install, but you need somebody to help you lift and put in the back of the truck as instructed. Its not that heavy, but just too awkward for one person to lift and place.
by:
Jay
03/18/2026
Great quality very happy with this. Would recommend to anyone looking for a nice retractable cover.
by:
Adam
03/17/2026
2025
GMC
Sierra 2500
I like the old latch system better.
The wire loom for drains is not going to last long.
The wire loom for drains is not going to last long.
by:
Jeff
03/29/2026
2026
Ram
3500
This cover looks amazing and rolls so smooth. No heavy trifold flipping. I have the 8’ bed and it works great.
by:
Ginger
07/01/2026
Vert good quality. No failures despite repeated use.
by:
Steve
07/02/2026
2020
Ford
F-250 Super Duty
Very well built and easy to use, great product.
by:
Todd
05/22/2024
I had some damage. It was a dent in the main box. I went ahead and used it anyway. I didn’t call or ask for return because I needed the cover right away and I messed the box up which would make the return hard to do. This was not etrailers fault. It was a packing issue from Retrax.
by:
Lou
07/18/2025
The RetraxPRO MX Hard Tonneau Cover was very easy to assemble and install. Item was packaged very well for shipping. I would recommend this tonneau cover.
by:
Michael
03/29/2026
2020
Ford
F-250 Super Duty
Only had this cover for a few weeks but it so far.
by:
James
08/28/2025
Easy installation. No problems after a year on my truck. Very satisfied with the purchase.
by:
Ray
02/18/2026
My third Retrax. The fit and finish is on point. Nice job... Again!
25
75
true
Show More Reviews
See what our Experts say about this Retrax Tonneau Cover
- Tonneau Cover Recommendation for 2002 Ford F-250 for Keeping Truck Bed of 2002 Ford F-250 DryThe RetraxPRO MX Hard Tonneau Cover # RT80323 is designed to direct all water and rain through it's drain system so that the truck bed is kept as dry as possible and is a fit for your 2002 Ford F-250 long bed. Would it keep the truck bed totally dry if left out in a very hard rain though? Realistically not. If the rain is light the truck bed contents will remain dry but if the rain is hard there will be some moisture let in. A lot of the reviews online for this cover state that they would...
view full answer... - RetraxPRO Tonneau Cover Cannister Dimensions for 2005 Ford F-350 Long BedThe RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte # RT80323 will have a measurement of 11-5/8 deep by 13-3/4 inches long by 63 inches wide. I reached out to the manufacturer to confirm these dimensions and created a photo to assist.
view full answer...
- Retractable Tonneau Cover Recommendation for a 2008 Ford F-450 Super Duty Long BedI'd be happy to help! We have 1 retractable tonneau cover that fits the 8' bed on your 2008 Ford F-450 and it comes with 2 different styles of rails that sit on top of your bed side; your options are the RetraxPRO MX # RT80323, which is the standard rail version, and the RetraxPRO XR # RTT-80323 which has t-slotted rails for mounting crossbars or a ladder rack as well. These are manual covers and it doesn't look like Retrax offers an electric so you'll be using a manual unfortunately. I...
view full answer... - Recommended RetraxPRO MX Hard Tonneau Cover for a 2020 Ford F-350 No it won't. You'll need to upgrade to the RetraxPRO MX Hard Tonneau Cover item # RT80384 for your 2020 Ford F-350. The 8' beds on the newer F-350s are actually 8' 2" long. The RetraxPRO MX Hard Tonneau Cover item # RT80384 is the same type of tonneau cover you currently have on your 1999 F-350 item # RT80323.
view full answer... - Tonneau Cover Recommendation to Use with Fifth-Wheel Hitch on a 2012 Ford F-350 DuallyFor an absolutely amazing cover for your dually 2012 Ford F-350, I recommend the RetraxPRO MX Hard Tonneau Cover # RT80362 (6-3/4" beds) or the # RT80323 (for 8 foot beds). Not only does this cover allow you to open the it at any point of the rails to have it partially open for your fifth-wheel hitch, it comes with a keyed locking handle that has much better security than covers that simply lock with the tailgate. It comes with a drill-free installation and installs simply into your truck's...
view full answer... - Does Pace Edwards JackRabbit Tonneau Cover Stake PocketsThe Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover # 311-FMF1507 does partially cover the top of the stake pockets. All of the retractable tonneau covers partially cover the top of the stake pockets but the one that fits your 2004 Ford F-250 long that covers them the least is the RetraxPRO MX part # RT80323.
view full answer... - Retractable Tonneau and Crossbars or Ladder Rack for 2015 Ford F-250For your 2015 Ford F-250, the RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte # RT80323 for 8 foot bed or for 6-3/4 foot bed # RT80362 (or Lexan # RT60362) are confirmed to fit. The Lexan you referenced is a hard polycarbonate and is great for snow and extreme weather. The TracRac TracONE # TH27000XT will not work with that Tonneau. You can add track mounted roof rack like feet # RRRLT600 and crossbars like # RRVA180B-2. For a similar tonneau and ladder rack I recommend...
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Dustin K
Updated by:
Tyler C
Updated by:
Wilson B
Updated by:
Mark S
Expert Research:
Jameson C
Installed by:
Hayden R
Written by:
Ronnie R
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
1/14/2026
Install looks great Jesse! We couldn’t agree more about the instructions. Honestly, unclear instructions are exactly why we started making our own install videos many moons ago, because seeing it done can make all the difference. It’s good to hear the cover feels solid and slides smoothly once installed. Your notes on water sealing and debris are fair, especially with RamBox-equipped beds and tailgate fitment. We appreciate you sharing your experience, and we hope it continues to serve you well over time.