To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These low-profile, lightweight cable chains are great for driving in light snow. Perfect for those trips where you need chains "just in case." Designed to fit passenger vehicles with tight clearance around the wheels.
Features:
Specs:
Note: To determine whether you can use snow chains on your vehicle, or if they might affect your ABS/EPS functionality, consult your owner's manual.
These chains are great for giving you a little extra traction in the snow. But if you live somewhere where you experience heavy snow often, you'll definitely want something more heavy duty than cables. Because these cable chains are lightweight and don't take up a lot of storage space, they are also perfect for keeping in your trunk if you occasionally travel through areas that require you to have chains on hand.
SAE Class S tire chains are designed for use on passenger vehicles with restricted wheel-well clearance. Most newer cars, vans, and small trucks - especially those with large aftermarket tires - will require Class S chains. If you're unsure about the class of your vehicle, consult your vehicle's user manual.
These chains will fit your tires provided there is both:
If you know your tire size, you may think you won't need to test fit your new chains. But there are a lot of variables that can affect whether chains will fit your specific tires, including your tire type, the amount of air pressure in the tire, the amount of tread wear, and the tire manufacturer. You'll also need to know how much clearance is in your wheel well, which you can determine by measuring from your tire tread to the sidewall of the wheel well.
We recommend that you order chains as early in the season as possible to give yourself plenty of time to test fit the chains and reorder if needed. This way, you won't be stuck out in the cold later with snow chains that don't fit.
You can test fit these chains in your garage or driveway, but you'll want to wait until there's snow on the ground to actually drive with them. Likewise, if you're out in the snow and come across bare pavement, you'll want to pull over and remove the chains. Even low-profile chains can cause damage to the bare pavement, your garage floor, or your vehicle if they break from the wear of riding on a harsh surface.
Installing these chains is simple.
1. Lay out the chains on the ground to make sure there are no twists or kinks.
2. Drape the chain over the tire or lay the chain out and drive onto it.
3. Reach around to the back of the tire and fasten the rear side cable by running the end with the metal stops through the eye of the hook on the opposite end.
4. Run any excess side cable through the metal clip.
5. Repeat this process on the front side of the tire.
6. Drive forward 1 car length, then check the chain and hand tighten it again if needed.
Rubber adjusters (sold separately) are recommended to help ensure a tight fit. Connect these to the front side of the cable in a star pattern. Make sure the hooks face away from your tire so your wheels don't get scratched.
Quick Tips:
How to Choose Snow Chains for Your Vehicle
To choose the right snow chains, you must match your tire size. Those measurements can be found on the side of your tire, as shown below.
185/60-15
These chains fit the following tire sizes:
Do you have a question about this Tire Chain?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.