Carr Custom-Fit Side Steps - Hoop II - Polished Aluminum - 7" Step - 1 Pair

Part Number: CARR105772

386 Reviews | 8 Questions

In Stock

$199.89

Not Confirmed to Fit

1961 Chrysler Newport

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

carr nerf bars - running boards side steps aluminum

carr nerf bars - running boards side steps aluminum custom-fit hoop ii polished 7 inch step 1 pair

carr nerf bars - running boards aluminum carr105772

carr nerf bars - running boards side steps polished finish carr105772

carr nerf bars - running boards polished finish aluminum carr105772

carr nerf bars - running boards side steps

carr nerf bars - running boards side steps custom-fit hoop ii polished aluminum 7 inch step 1 pair

carr nerf bars - running boards polished finish carr105772

carr nerf bars - running boards polished finish

carr nerf bars - running boards side steps polished finish custom-fit hoop ii aluminum 7 inch step 1 pair

Show All (12) Product Images

Show Fewer Product Images

Customer Photos

Carr Custom-Fit Side Steps - Hoop II - Polished Aluminum - 7" Step - 1 Pair customer photo

Show All (1) Customer Images

Show Fewer Customer Images

Videos

Review of Carr Nerf Bars - Running Boards - Hoop II Custom Fit Aluminum Side Steps - CARR105772

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Get into and out of your vehicle with ease by using these sturdy, durable steps. Multi-mount system ensures a precise, stable fit. Wide, flat, non-slip surfaces provide sure footing, and the polished finish offers a hint of style. Fastest Shipping and Great prices for Carr Custom-Fit Side Steps - Hoop II - Polished Aluminum - 7" Step - 1 Pair. Read our customer reviews of Carr nerf bars - running boards. Call 1-800-940-8924 for expert service or order your nerf bars - running boards part number CARR105772 by Carr online at etrailer.com.

All Info
Reviews (386)
Q & A (0)
Related Parts
Photos

Carr Nerf Bars - Running Boards - CARR105772

Features:

Stylish steps let you get into and out of your vehicle with ease
Large, flat step surfaces have non-slip diamond tread for excellent stability
Hoop style gives a rugged, off-road look
Multi-mount system provides a simple and precise fit for your vehicle
- Mounting heads attach to rocker panels
  - Rotate for a perfect fit
  - Constructed of zinc-plated steel
- Hardware included
Durable, rustproof, cast aluminum alloy construction
XK3 Kromezone "Chrome Like" double powder coat adds a high-end finish that also helps protect against wear and corrosion
Made in the USA

Specs:

Overall length: 10"
Step platform dimensions: 7" long x 3-1/2" wide
Drop: 5"
Weight capacity: 500 lbs
Quantity: 2 steps
Limited lifetime warranty

The heads of the unique multi-mount installation system on Hoop II side steps attach to your rocker panels and allow the steps to pivot for a precise fit.

105772 CARR Hoop 2 Tube Steps - XK3 Kromezone Finish - 1 Pair

Installation Details CARR105772 Installation instructions

This Product Fits The Following Vehicles

Customer Satisfaction Score:

96% were satisfied with this product

4% of customers were not satisfied

Wrong item was ordered

4% of customers were not satisfied

Wrong item was ordered

4.7

386 reviews

5 Stars		(297)
4 Stars		(67)
3 Stars		(8)
2 Stars		(5)
1 Star		(9)

by: Jeff 05/21/2026

Good product

by: Alan 09/23/2021

Good quality, easy install, seem very rugged. Help a great deal to ge into Mercedes sprinter 3500.

Click to Enlarge

by: Leland 06/02/2019

2014 Ram ProMaster 2500

The steps are as advertised. Would have given 5 stars except the installation instructions were poor. They fit my 2014 Promaster but I had to figure out which fasteners to use. There is some drilling and I didn’t like the sheet metal screws that came with it so I replaced them with some self tappers. Overall it was a good buy and my wife can climb into the van.

Leland One Year Later

6/3/2020

I give these little steps a 10. They get lots of use from some heavy people and are holding up great.

by: R D G 05/25/2015

2012 Ram 2500

Good product but I had to engineer the mounting. I had to make a1/4" shims for the back door mounts due to a depression stamped in the panel. I'm pleased with the finished product.

The American flag receiver cover is a bonus.

by: S 07/26/2022

Great quality for the price, straightfoward install.

Couple of notes: for an NV3 Sprinter, use the short tubes. The instructions don't say this. Also, have a very good drill and bits to get through the metal - it's pretty thick.

by: Lamberto M 08/08/2014

2013 Dodge Ram Pickup

The product is great. The installation process was pretty simple and my truck looks great with them on. Thanks etrailer

by: Eugene 05/03/2019

Trailer has always come through with flying colors. Prompt delivery and good tracking let's me know where and when to expect delivery
All items seem to be the best quality I have seen
They have my trust.

by: Robert 07/18/2020 One Year Later

My wife had gotten to the point where it was difficult to get into our Van these steps have helped immensely. Still holding up and look as good as the day I bought them

by: Dennis 05/01/2022 One Year Later

Needed a little modification yet work very well and looks sharp!!

by: Clinton 06/24/2024 One Year Later

Easy to install and they work great...

by: Martin 04/07/2021 One Year Later

No Problem. Works as it should.

by: Dewey 12/31/2020

I already had your steps but knocked on off missed it so bad had to order new ones. love them.

by: William 11/12/2025

2024 Mercedes-Benz Sprinter 2500

by: George 09/08/2022

by: Terry 09/20/2022

by: Albert 07/07/2025

by: Rodney 09/18/2026

2025 Ram ProMaster 2500

Solid and simple installation, the right parts nothing missing. They look good and so much easier on my knees.

Click to Enlarge

by: Jeffrey 02/08/2026

2026 Jeep Wrangler

Had to remove the rock slide to install which was no big deal, other then that installation was easy. Steps look great quality is great I really like that they don't stick out to far so I'm not hitting my shins. Will be adding some for rear doors soon.

Click to Enlarge

Kate F.

2/11/2026

They look great Jeffrey! I love the color jeep you went with, my neighbor Tammy has the same color. Do you get out and do any of that crazy cool Jeep stuff? My little brother is out in California (where I am originally from) and has done some really awesome modifications, he sends me all kinds of crazy pictures of him climbing through mountains, looks like a lot of fun!!

by: Nicholas 12/05/2025

I finally installed the side steps that I bought from you guys. Check it out

Click to Enlarge

Mike L.

12/5/2025

Nice job, Nicholas! Thanks for the photos!!

by: Shannon 05/23/2026

They've made it easier for the ladies in my life to enter and exit my vehicle easier

Click to Enlarge

James D.

5/27/2026

Love to hear this Shannon and we appreciate you choosing etrailer!

by: Dana 10/02/2025 One Year Later

2012 Chevrolet Avalanche

This worked excellent to put on an existing running board to create a half step for my wife to get into my 2012 Avalanche much easier. I had to alter it slightly to mount it but am very happy with the result.

Click to Enlarge

by: Kevin 05/17/2025

2024 Jeep Wrangler

Matte black finish and heavy duty construction. Easy install on a 2024 2 door Rubicon and a 2024 Mojave. I would recommend laying out all the parts and organizing them. The shorter bolts are for the rear of the bracket while the longer are for the front toward the step. I would also recommend drilling the pinch weld area, attaching the bracket to the pinch weld area, and then drilling the hole for the sheet metal screw. This is perfect if you need a step but don't want to lose your rock sliders. They can be easily removed by taking off two bolts and two sheet metal screws for each side if you are wheeling. I wouldn't order from anyone other than etrailer. They are the only site with a review and install video. They offer great customer service if you run into a problem and fast shipping. I am very happy with etailer and Carr.

Click to Enlarge

Gwendolyn Y.

5/19/2025

The step looks great on your Jeep, Kevin! Also, thanks for all the install tips. Tips like that will definitely help someone down the road :)

by: Bart 06/18/2026

1996 Ford F-250

The steps themselves are solid, and make getting in and out of our truck easier, esp. for older folks. I have a minor issue with the installation instructions, however. In the instructions, they state:

" 8. *REFER TO DIAGRAM “A” WIRE HARNESS. Remove the plastic cover that is holding the carpet down and move the wire harness out of the way before drilling out the hole for the next step as shown on the diagram. Do
this procedure for both sides of your vehicle, because the wire harness may be on either side."

There's insufficient space to move the wiring out of the way as the hole for the sheet metal screw ends up dead in the center of the channel , so I used a piece of angle iron slipped under the wiring to protect the harness while drilling the hole. Once I installed the screw, I realized that the sharp point of the screw would be rubbing against the harness, and would eventually cause a short. To prevent this, I slipped the extra 1/4" Nyloc nuts provided in the kit over the sharp end of the sheet metal screw as shown in the photo.

I realize that there's not much room to use another type of fastener and working around the harness is awkward, but I think the sheet metal screw should really be replaced with another fastener that doesn't present a hazard to the harness. A 1/4" Torx button head bolt inserted from the top would definitely be an improvement, for example.

by: Gerald 08/30/2025

Good quality. Made some adjustments to fit my side rails. Painted brackets and bolts. Drilled holes to fit 3/16" self tapping screws. Bent rear tab flat. Works great so far.

Click to Enlarge

by: Paul 01/21/2025

I own a 1997 F250 crew cab truck. I got tired of wearing the driver seat down getting in and out without some type of step. I've always liked the "stirrup" style steps and was happy to stumble across your website. After seeing the actual product AND HARDWARE in the kit, I ordered immediately. The steps arrived several days later and I installed them that night. Very happy with the steps, shipping, and quality of the boxes they arrived in. Took me several minutes to get to the product as the boxes were secured so well. The hardware provided was perfect. I will order 2 more for my rear doors in the near future. Thank you!

Click to Enlarge

Victoria H.

1/22/2025

Hi Paul, it makes me so happy we had exactly what you were looking for and that these side steps fit your needs perfectly! Whenever you are ready for your next set, we will be here!

386

true

Show More Reviews

See what our Experts say about this Carr Nerf Bars - Running Boards

Do you have a question about this Nerf Bars - Running Board?

Best Side Steps for Clearance and Stepping Area on a 2019 Mercedes-Benz Sprinter 2500
I actually have two varieties of the Carr Custom-Fit Side Steps to recommend for your 2019 Mercedes-Benz Sprinter 2500. The first are the Hoop II variety. They have a 5" drop and a stepping area of 7" long x 3-1/2" wide. If you prefer a polished aluminum look, then you can use part # CARR105772. If you prefer a silver powder look, use part # CARR105774. If you like the black powder coat, you can use part # CARR105771. I've linked to a video review of these for you to look at. As for...
view full answer...
Recommended 7 Inch Steps for a 2023 Ram Promaster 2500
We currently do not have an option for a 17" step on the 2023 Promaster 2500's so your guess would be as good as mine. We do have a 7" step that has been recently reviewed by a customer. It is the Carr Custom-Fit Side Steps item # CARR105771. These custom fit steps attach to your ProMaster with included hardware. They are made in the USA of cast aluminum that has been powder coated for durability and rust resistance. I have linked an installation video below along with a screenshot...
view full answer...
Running Board or Steps Recommendation for 2015 Ram ProMaster 3500 Van
It looks like you are correct in your assessment; I also contacted the manufacturer they did confirm that mounting the Aries RidgeStep Running Boards # AA2055539 does use the hole that is used for jack placement on the 2015 Ram ProMaster 3500. You may want to consider using steps like the Carr Custom-Fit Side Steps - Hoop II # CARR105772 which mount to the frame of the vehicle, instead of using the jack holes. These steps do require some drilling, but that will be the case for any steps...
view full answer...
Differenced Between Carr CARR105772 and CARR109772 Hoop Steps
The difference between the # CARR109772 and the # CARR105772 is the mounting brackets that are vehicle specific. The # CARR105772 won't fit your truck. For your 2019 Ram 2500, you'll want to go with the # CARR109772 which are compatible with all cab styles. The steps are sold in pairs. I've linked to a product demonstration video for a similar step.
view full answer...
Carr Custom-Fit Side Steps For A 2022 Ram ProMaster 2500
Carr does offer some of their steps individually like the Carr Custom-Fit Side Step # CARR103992-1, however for your 2021 Ram ProMaster 2500, they only offer their step as a pair # CARR105772. These steps measure 10" long, has a 5" drop and a maximum weight capacity of 500-lbs. I have also included a review video for you to check out as well.
view full answer...
Availability of Running Boards for 2014 Ram 2500 Crew Cab
We sure do! If you click the provided link, you can see all the various step options we offer for your 2014 Ram crew cab. We offer everything from the old-school Carr Steps, part # CARR105772 (sold in quantities of 2) to Nerf Bars like Westin's Stainless Pro Traxx # 21-23560 to actual running boards like Westin's # 27-6155-1905 Sure -Grip Running Boards. The # 25-0855 bars you referenced are for a 1992-2000 Chevy/GMC C/K Series truck, and wouldn't fit your truck.
view full answer...
Steps for 2013 Ram 2500 That Mount to Chassis Not Body Sheet Metal
Some running boards and steps do mount to the vehicle's frame members and not to its sheet metal. For example, the Carr Tube Steps # CARR105772, attach to the rocker panels. I have linked for you our main page for all step products that fit the 2013 Ram 2500. At the top of the page is a "Select Vehicle Style" drop-down menu that will let you select your cab style to then see all compatible products for your particular truck. Do please note that some products may have fit exclusions, such...
view full answer...
Do the Carr Custom Fit Steps Use Existing Mounting Locations or is Drilling Necessary to Install
I have confirmed with my contacts at Carr, and the installation of th Carr Custom Fit Hoop II # CARR105772 will require drilling the correct installation holes on your truck. You will not be using existing mounting locations. I also confirmed with my contact, and the # CARR105772 is confirmed as a fit for a 2014 Dodge Ram gas pick up. If your Ram is a diesel you will want to use the # CARR107442. According to Carr, this #CARR107442 is confirmed to work with both gas or diesel trucks....
view full answer...

Do you have a question about this Nerf Bars - Running Board?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Rachael H

Written by:

Lindsey S

Video by:

Dustin K

Updated by:

Amy B

Updated by:

Wilson B

Updated by:

Anna W

Updated by:

Jessie B

Video Edited:

Chris R

Installed by:

David F

Installed by:

Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.