Carr Custom-Fit Side Step - Hoop II - Polished Aluminum - 7" Step - Qty 1
This item does not fit your vehicle
2004 Ford F-150
These items fit your vehicle
2004 Ford F-150
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get into and out of your vehicle with ease by using this sturdy, durable step. Multi-mount system ensures a precise, stable fit. Wide, flat, non-slip surface provides sure footing, and the polished finish offers a hint of style.
Features:
Specs:
The heads of the unique multi-mount installation system on Hoop II side steps attach to your rocker panels and allow the steps to pivot for a precise fit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Carr Hoop II custom fit side step. This is gonna provide a five inch drop to make it easier for you to get into an out of your vehicle. It is constructed of a durable rustproof cast aluminum alloy so it is going to hold up really well for you. No worries about rust or corrosion. And it still provides a 500 pound weight capacity so plenty for even large individuals like myself to get in and out of your vehicle.
This does feature a multi mount system that provides a simple and precise fit to the vehicle. This is designed for many 2015 and newer GMC and Chevrolet trucks. I would encourage you to use our vehicle fit guide here at etrailer.com. You'll select your year, make and model and we'll let you know which products will work with your vehicle. So it will help to make sure that this will work with your year and model of truck.
This does have these zinc plated steel mounting heads that will attach to your rocker panel. The hardware and instructions are included here to make sure it's a very simple process for you to get them installed. And then it is gonna provide that large flat surface for you so you can make sure you have excellent area to put your foot on. And it's got this non-slip diamond tread to give you excellent traction as you're getting in and out. So even if your shoes are wet, you'll be able to have some traction there.
The overall dimensions of the platform are about seven inches long by three and a half inches wide. Our overall length from the very front of the step back to the back of our mounting heads is right at nine inches. And this does have an XM3 Extreme polished finish so it's not going to rust, crack or peel. It's made here in the USA and it does come with a limited lifetime warranty. So if you we're to have any issues with it, you're more than welcome to reach out to us here at etrailer.com.
But I think this is going to provide a great step for you to make it easier to get up into your truck. So that concludes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
Great product but I couldn’t use your directions because I mounted it on my Ford 8n tractor. In fact I only used the four bolts that connect mounting brackets to step. I cut two pieces of flat stock welded it on frame and drilled 2 1/4” holes 2 on each mount and viola the job is finished and now my wife can get one and off tractor with ease. Great product and it was the only one I found that fitted my needs for mounting flat on top of stock and stair is adjustable. I recommend this product to anyone looking for a quality piece at a great price. Thank you etrailer for creating this outstanding step.
My husband was able to install these on our 1989 F150 without issue. Thank you!
I bought these Carr steps to dress up my 2019 Ram 2500. I’m going for the ‘utilitarian minimalist chic’ look and these nailed it far better than the factory running boards.
What I liked -
- Heavy duty- steps and hardware feel substantial
- Mounting kit made specifically for my truck
- Straightforward instructions
- Super solid and stable
- Look far better than nerf bar steps
- Brackets came slightly expanded which made fitment easier. They bent in to a tight fit once the bolts were torqued down
What I have mixed opinions on -
- I had a tough time getting just the right fit, as the lip on the truck isn’t that big, perhaps 3/4”. Some holes I drilled using the “hold up the bracket and mark with a sharpie” method were too low, leaving not quite enough material beneath the hole. Other holes that were a little on the high side made for a tough fit of the bracket. So be patient, measure twice, drill once
- There was a whole bunch of extra hardware! Sort it all out on the counter beforehand to see which jives with the instructions and set the others aside
- Had some bad washers in the hardware kit
Well made, did not provide lower step than existing side rail
Easy installation, looks great!
Good quality. Made some adjustments to fit my side rails. Painted brackets and bolts. Drilled holes to fit 3/16" self tapping screws. Bent rear tab flat. Works great so far.
My order arrived in less than a week and it took about a hour or so to install. Instructions were clear and easy for most any fitment. For my Chevy it could not have been any easier. This truck is for my daughter who has spina bifada so it enables her to climb in easier. The steps look great and I'd highly recommend them and etrailer. I've used etrailer a few times now and will continue as they have quality parts at some of the best prices!
Originally ordered these as a replacement for the front. Did not check size before ordering.
Decided to put them under the rear doors instead.
Since I already had them on the front and was able to see how they were mounted, it made the install was a piece of cake.
The instructions were clearly understood for my Silverado and only took me about 15 minutes per side to install.
I have since ordered the larger pair for the front and will use the same brackets to replace.
Only gripe is the finish on the ones that were originally on the truck (8 years old) has chipped off due to mag chloride on the road and frozen ice being knocked off.
Since I was not the original purchaser, I cannot claim warranty issues as they are guaranteed for life.
Hopefully with the new ones Carr perfected their coating, we will find out in another 8 years!
Just what I needed. High quality and easy installation. Note that on my 2010 Silverado there is a sheet metal brace under there that determines where they can be mounted (four inches forward of the seat front edge).
Reasonably easy install. I installed on an AWD Sprinter and the height is just about right. I may add a few more screws to the top later if it loosens up.
My husband added a step to our 68 Chevy Pickup
I purchased "Carr" steps for our "new" 1989 Ford F150. The hardware supplied with the steps was excellent compared to some imported products. There were good instructions and everything fit. This will help by spouse get in and out safely and with a bit more dignity.
This worked excellent to put on an existing running board to create a half step for my wife to get into my 2012 Avalanche much easier. I had to alter it slightly to mount it but am very happy with the result.
Did quite work well for promaster. Product was good quality, just bad angle when mocked up.
The steps were back ordered. Nick from etrailer notified me and kept me updated on expected shipping date. They arrived ahead of projected date. As far as the steps, they are installed and look great. They are sturdy and very well made.
These were very easy to install and they are wonderful! Makes it so much easier to get in and out of my cab on my 2019 Ford E350 motorhome. Very sturdy and they look really sharp. Excellent price.
They've made it easier for the ladies in my life to enter and exit my vehicle easier
I finally installed the side steps that I bought from you guys. Check it out
Exactly what I was looking for. As we get older the simple things like stepping up on a mower can become precarious. My wife needed a step for her zero turn and this really fit the bill. It took just a little ingenuity, but this isn’t really what it was designed for. Cheers
I own a 1997 F250 crew cab truck. I got tired of wearing the driver seat down getting in and out without some type of step. I've always liked the "stirrup" style steps and was happy to stumble across your website. After seeing the actual product AND HARDWARE in the kit, I ordered immediately. The steps arrived several days later and I installed them that night. Very happy with the steps, shipping, and quality of the boxes they arrived in. Took me several minutes to get to the product as the boxes were secured so well. The hardware provided was perfect. I will order 2 more for my rear doors in the near future. Thank you!
Had to remove the rock slide to install which was no big deal, other then that installation was easy. Steps look great quality is great I really like that they don't stick out to far so I'm not hitting my shins. Will be adding some for rear doors soon.
The steps themselves are solid, and make getting in and out of our truck easier, esp. for older folks. I have a minor issue with the installation instructions, however. In the instructions, they state:
" 8. *REFER TO DIAGRAM “A” WIRE HARNESS. Remove the plastic cover that is holding the carpet down and move the wire harness out of the way before drilling out the hole for the next step as shown on the diagram. Do
this procedure for both sides of your vehicle, because the wire harness may be on either side."
There's insufficient space to move the wiring out of the way as the hole for the sheet metal screw ends up dead in the center of the channel , so I used a piece of angle iron slipped under the wiring to protect the harness while drilling the hole. Once I installed the screw, I realized that the sharp point of the screw would be rubbing against the harness, and would eventually cause a short. To prevent this, I slipped the extra 1/4" Nyloc nuts provided in the kit over the sharp end of the sheet metal screw as shown in the photo.
I realize that there's not much room to use another type of fastener and working around the harness is awkward, but I think the sheet metal screw should really be replaced with another fastener that doesn't present a hazard to the harness. A 1/4" Torx button head bolt inserted from the top would definitely be an improvement, for example.
Matte black finish and heavy duty construction. Easy install on a 2024 2 door Rubicon and a 2024 Mojave. I would recommend laying out all the parts and organizing them. The shorter bolts are for the rear of the bracket while the longer are for the front toward the step. I would also recommend drilling the pinch weld area, attaching the bracket to the pinch weld area, and then drilling the hole for the sheet metal screw. This is perfect if you need a step but don't want to lose your rock sliders. They can be easily removed by taking off two bolts and two sheet metal screws for each side if you are wheeling. I wouldn't order from anyone other than etrailer. They are the only site with a review and install video. They offer great customer service if you run into a problem and fast shipping. I am very happy with etailer and Carr.
Great product
The step has worked perfectly. However, I installed it myself, I was enable to
drill one of the attachment, even with a 90 degree drill and the proper bit and oil in my 2023 Sierra.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.