bing tracking image
  1. Chains and Binders
  2. etrailer
  3. Chain Binders
  4. 1/2 Inch Chain
  5. 3/8 Inch Chain
  6. Ratchet Chain Binder
etrailer Quick Binder Ratchet Binders for 3/8" - 1/2" Chains - 12,000 lbs WLL - Qty 2
etrailer

etrailer Quick Binder Ratchet Binders for 3/8" - 1/2" Chains - 12,000 lbs WLL - Qty 2

Part Number: e54GV
In Stock
$93.83
Chains and Binders
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
These etrailer Quick Binder ratchet binders give you a controlled way to tighten 1/2" chains on your flatbed trailer. Their extension, free-spin, and take-up modes let you reach the hooks, pull the slack out, and ratchet the chains tight. 1-800-940-8924 to order etrailer chains and binders part number e54GV or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for etrailer Quick Binder Ratchet Binders for 3/8" - 1/2" Chains - 12,000 lbs WLL - Qty 2. Chains and Binders reviews from real customers.
  • All Info
  • Reviews (7)
  • Q & A (0)
  • Videos (1)
  • Photos

etrailer Chains and Binders - e54GV

  • Chain Binders
  • 1/2 Inch Chain
  • 3/8 Inch Chain
  • Ratchet Chain Binder
  • etrailer
  • Grab Hooks
  • 12000 lbs
  • Excavators & Backhoes
  • Farm Tractors
  • Folding Handle

These etrailer Quick Binder ratchet binders give you a controlled way to tighten 1/2" chains on your flatbed trailer. Their extension, free-spin, and take-up modes let you reach the hooks, pull the slack out, and ratchet the chains tight.


Highlights

  • 12,000 lb Working Load Limit: Sized for farm tractors, backhoes, and comparable loads.
  • Fits 3/8" to 1/2" Chains: Works with common Grade-70 transport chains (not included) used on larger equipment.
  • Quick Slack Removal: Handle spins freely to take up slack by hand before you start ratcheting.
  • Controlled Tensioning: Ratchet mode lets you tighten or loosen the chains in small, controlled increments.
  • Long Service Life: Powder-coated body and zinc-plated hooks resist rust in rain and snow.
  • Ready for Transport Work: Meets DOT and WSTDA T-6 requirements for transport binders.

Features to know about

What Chains Do These Quick Binders Work With?

etrailer etrailer Quick Binder ratchet binders with Chainsetrailer etrailer Quick Binder ratchet binders with Chains

These etrailer Quick Binder ratchet binders are rated at 12,000 lbs and support 3/8" to 1/2" chains (not included). Those sizes cover the Grade-70 transport chains commonly used with compact tractors, skid steers, and similar machines. Pairing the binders with the right chain size makes sure the hooks fit correctly and the working load limits match what you're hauling. There are 10', 16', and 20' chains (e93GV, e33GV, and e53GV - each sold separately) available that are rated to pair with these binders.

What Does the Three-Mode Switch Actually Do?

etrailer etrailer Quick Binder ratchet binder Three Mode Switch

The etrailer Quick Binder ratchet binder's lever lets you quickly move between three modes as you're setting up or undoing your chain.

  • Extension (OUT): When you're setting up, this lets you open the binder and extend the barrel so you can reach the chain hooks.
  • Free-Spin: Lets you turn the barrel by hand to remove slack before you start ratcheting or after the chain is loose.
  • Take-up (IN): Adds tension in small increments so your chain tightens fully on the load.

Note: Do not use Free-Spin to release a chain that's under load.

Specs

Capacity:

  • Working Load Limit: 12,000 lbs
  • Supports Chain Sizes: 3/8" - 1/2"

Construction And Weight:

  • Body: black powder-coated steel
  • Hooks: yellow zinc-plated
  • Weight: 26.5 lbs

Compliance:

  • Meets DOT and WSTDA T-6 requirements

Warranty:

  • 1-year limited


e54GV etrailer Quick Binder Load Binders - 3/8" - 1/2" - 12,000 lbs WLL - QTY 2





Video of etrailer Quick Binder Ratchet Binders for 3/8" - 1/2" Chains - 12,000 lbs WLL - Qty 2
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Quick Binder Ratchet Chain Binders Review

Hi, I'm Matt with etrailer. Today we're gonna talk about the kit of two etrailer quick binders. Now these are gonna be compatible with chains of link sizes from 3/8 to 1/2 inch, and they are gonna be rated for 12,000 pounds. I actually do like this kit because more than likely, if you're getting one chain binder, you're probably gonna need either two or four of 'em. So let's take a closer look at 'em. So I've had my hand on quite a few different chain binders in my day here at etrailer, trying a different couple brands.

And then when I was in the military, I'd use these a lot too. So there's gonna be two main types. You'll see you're gonna see a lever style. A lever style is great because they're actually pretty fast to use if you have everything on the right lengths. The downside to 'em though, they take a lot of force to put down, and it can be a little bit dangerous if you're in the wrong spot.

If it pops up and hits you, you can really hurt yourself. The other thing to 'em is if you don't get it on the right length the first time, you are gonna have to redo it all again, and that's gonna take even more time. Now, with this style, this is gonna be a ratcheting style, and what I like about it is it's very easy to move around. Now, a lot of pressure behind here, so it's gonna be safer. And the other thing is it's gonna give you more wiggle room.

So if you get this on a link and you notice it's not perfect, if you just ratchet that down a little bit more, it should get you the tightness that you're looking for. But enough of me talking about it, let's actually use it. So when it comes to usher using this, I recommend loosen it up some (metal clacking) so we have some excess. (metal clacking continues) And to tighten and loosen it, this will give you a direction to let you know where you need to put that paw at. So right now it's on the out.

If I press this trigger here, just like that, then it'll tighten in. I do like this 'cause if you get this in an awkward orientation, you can kind of forget. You can reference back to this. And this trigger here feels a little bit more comfortable than actually trying to press that paw itself. You can still do that, but I find it actually easier just to use this. So once we have that done, I'll come over to my chain, make sure everything's hooked up properly. And this is how I was gonna kinda lay down on these 3/8 links. So you'll notice, just move around a little bit. But once we tighten that down, we won't get any movement at all. Bring it over here to this side. And what's nice about this is if you're ever using this and you forget what size links this is gonna be compatible with, we are gonna have a logo here that's gonna tell us 3/8 to 1/2 inch. So that's good to remember. When it comes to using it, I'll just make sure it's in the right orientation, just like that. We always gonna have a free-spin mode too. Now just spin either way. Good if you want to kind of set this in orientation that's a little more comfortable for you. And then we're just tightening it down. You'll just grab onto this section here. I do like that we are gonna have this kind of coated piece, so it's easier to grip, especially when it's cold outside. I do recommend having some gloves to make this process easier, and just so you don't pinch yourself. (ratchet cranking) And this really won't take too long at all. (ratchet cranking continues) I'll typically just grab onto this bar here, turn it with my hand, and pull on the lever. You can do which either one is more comfortable for you. (ratchet cranking continues) And at this point, we are getting a little more resistance. That's what we want. (ratchet cranking continues) There we go. That screws fairly tight. Then I have the option. That's what's unique about this one specifically is this handle folds down, so I don't have to worry about that sticking out. We can even do still is turn it into that free-spin mode and put it like this, 'cause I still like to have mine facing the inside. Of course, come back through, make sure everything feels nice and tight, like it is now. And that's pretty much it. So let's talk about the specs some. So this is going to have a working load limit and a brake limit. Just make sure you're always going with the working load limit, 'cause that's what it's actually rated to actually haul something. So we are gonna have a weight limit of 12,000 pounds for the binder. But just check what your chains, your hooks, and any type of tie-up points are rated for as well, just so you don't damage anything. It's also important to make sure you have the appropriate amount of chains and binders for your equipment. And also just follow the regulations in your state so you can stay legal and safe. Now, another thing about these chains is, like I said earlier, right now we have the 3/8 inch links going right through here, and this is working just fine. That's not going anywhere. There's no wiggle room there. I do have a larger chain with me. This is gonna be the 1/2 inch one, and this is what it's gonna feel like to actually go through there. This is a really snug fit. Still goes in there, really clean. I actually do like that. Just make sure with the welds on these, I do like to have these facing away 'cause I feel like it fits in here better. I did wanna talk about the coating on here a bit. So this coating's gonna help prevent this from rusting over time, especially since this is gonna be sitting out in the elements. Now, when you're not using this, I would recommend storing it somewhere dry, just because right here where this paw is or where the paw makes contact with on that gear, it's gonna rub off some of that coating. Especially if you're using this quite a bit, it will happen. It's gonna be the same case with any other type of chain binder out there that uses the mechanism like this. Now, another thing too is we don't have any coating on these threads. I like that. The reason why I like that is if we did have some type of coating here, that probably cause us to bind up a lot more. And with us putting this much pressure and strain here, we don't want that extra coating getting in our way. So overall, I do think this is gonna be a solid kit. If you need a couple chain binders and if you only need one of them, we are gonna have a kit of one as well. And if you need a kit that comes with some chains, we've always still got you covered for that too. Now, if you're looking for something that's a little bit different for more some specialty type loads, then I would recommend Dura-Belt. They're gonna work very similar to this, but they're gonna have different types of attachment for different equipment. So it really just depends on what you're hauling. But for most cases, I think these are gonna do just great for you. And if you guys have any other questions or you wanna inquire more about our kits, let us know here at etrailer. And again, I'm Matt, and thanks for watching.

Ratings & Reviews

5.0

7 reviews
5 Stars
(7)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
Quality and excellent tracking information
by:
Quality Binders
by:
Everything looks good, I haven’t used it yet but I will be using them this week. They store a lot easier than the old style ratchet style that I had.
by:
Great price and works perfectly, ratchet moves smoothly without binding. It's obvious that these will last a very long time. Will be purchasing more!
by:
by:
by:
7
7
true

See what our Experts say about this etrailer Chains and Binders


Info for this part was:

Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Daron K
Updated by:
Daron K
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Sabrina W
Written by:
Sabrina W
Employee Matthew B
Installed by:
Matthew B
Employee Evan R
Video by:
Evan R

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924