See what our Experts say about this Erickson Ratchet Straps

• What Ladder Rack and Tonneau Cover do You Recommend for My 2021 GMC Sierra 1500?
  For your 6-1/2 foot bed on your 2021 GMC Sierra 1500, you are correct in saying that the Adarac racks will attach into your truck's stake pockets to allow you to use a tonneau cover with it. Specifically, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack # A4003497. Apart from the 500 pound maximum weight capacity of the rack, another benefit is the fact that the uprights do not taper inward toward the truck's bed. This is really important if you use a folding cover or a roll-up...
  view full answer...
  
• Recommended Trailer Hitch Receiver and Mobility Scooter Carrier for 2006 Chrysler 300
  On your mother-in-law's 2006 Chrysler 300, there is a sticker normally on the driver's door that gives you the Gross Axle Weight Ratings (GAWR) for the front and rear axles not to be exceeded. To determine the maximum loading conditions of the vehicle, locate the statement “The combined weight ofoccupants and cargo should never exceed XXX kg or XXX lbs.” on the Tire and Loading Information placard. The combined weight of occupants, cargo/luggage and trailer tongue weight (mobility scooter...
  view full answer...
• Looking For Tie Down Kit For Wheelchair
  Hello Ron. We do offer tie downs that can be used for a wheelchair. I recommend the Erickson Aluminum O-Track Kit # EM85JV. This comes with two 18" sections of track along with four o-rings. You can use straps like the Erickson Re-Tractable Ratchet Straps w/ Push Button Releases # EM34415 to secure the chair.
  view full answer...
• Recommended Cargo Carrier and Ratchet Straps for a 2015 Mercedes-Benz Sprinter
  Hey Dave yes, the 22-1/2x49 Curt Cargo Carrier # C18113 is perfectly acceptable for your Mercedes-Benz Sprinter and will work great with a 2" class III trailer hitch. I'm not too sure what you plan on hauling, but you'll need to keep it tied down regardless, so I'd also suggest grabbing a set of ratchet straps # EM34415 to keep everything in place. If there is anything else you need help with, feel free to drop a comment and let me know!
  view full answer...
• Does the TracRac SR Fit Simultaneously with the BAK Revolver X4s on My 2022 Ford F-150?
  Based on your recently-searched parts, I am assuming you have a 5-1/2 foot bed on your 2022 Ford F-150. If that is the case, the Thule TracRac SR # TH43002XT-508 and the BAK Revolver X4s # BAK56ZR are definitely compatible. I went ahead and attached a photo of a neighbor using the TracRac SR and the X4s on his Ford F-150. However, while it is not a huge issue, there may be some very slight rubbing against the base of the innermost sliding upright of the TracRac SR since they angle toward...
  view full answer...
  
• Best Solution for Carrying E-Bike on a Travel Trailer Using a Carrier with a Ramp
  I do have a couple of solutions for you but you do have a very unique situation so there isn't a perfect solution that is able to address all of your concerns. The best solution is to install a trailer hitch like the Adjustable Width Trailer Hitch Receiver # C13704 (which fits frames from 22" to 68-1/2" wide) on your travel trailer and then use the Ultra-Fab Dirt Bike Carrier # UF48-979033 to carry your bike. Since this has a ramp (like the EasyFold XT #TH903202) it will help make loading...
  view full answer...
  
• Choosing Correct Hitch Tongue Weight Capacity for Using a 4-Bike Platform Bike Rack on Honda CR-V
  The Curt Class III trailer hitch # C13119 does have a 350-lb tongue weight (TW) rating as you noted, and that capacity must be enough for the weight of the bike rack itself plus that of your loaded bikes. A substantial 4-bike rack like the Hollywood Racks Sport Rider SE # HR1400Z weighs about 80-lbs all by itself. Add the bikes and you are indeed talking about a hefty load on the hitch. In your case I absolutely agree that using a higher-rated hitch like Draw-Tite # 75742 is the way to...
  view full answer...
• Best Versatile Tie-Down Options for a Cargo Trailer
  I am not sure how many of the Erickson E-Track systems you have seen but it really is your best bet when it comes to versatility and functionality. Not only do they have the Horizontal E-Track, like part # E19148, but they also have Vertical E-Track like part # E19146. You could install both types of track on your cargo trailer (if it is enclosed) and then move the attachment points around by either using the Erickson E-Track Strap # EM59136 or using the Tie-Off w/ D-Ring # E59143 along...
  view full answer...
  
• Hitch Cargo Carrier Strap Recommendations
  For the etrailer Cargo Carrier part # e98874 that you referenced you have a couple options. You can use a stretchable cargo net like the part # H9500100 and/or you can use a ratchet type strap like the # EM34415. I attached a review video for you to check out that shows how ratchet straps are typically used. For the ultimate in cargo control I would recommend using both, but just the straps would work fine as well for larger items.
  view full answer...
• How to Reduce Excessive Trailer Noise Banging/Rattling
  It sounds to me like the hinge pin on your trailer's tailgate is worn and is causing excessive movement which will result in a noisy ride. In order to secure the tailgate to the trailer while driving down the road I recommend using a set of ratchet straps like the Erickson Re-Tractable Ratchet Straps part # EM34415. In order to reduce movement and rattling from the ball mount inside the receiver tube you will want to use an anti-rattle hitch pin such as the Anti-Rattle Trailer Hitch Receiver...
  view full answer...
• Best Light Weight Hitch Mounted Cargo Carrier for Lawn Mower
  I have a great solution for you to carry your lawn mower. The Flint Hill Goods 29" x 49" Carrier w/ 60" Ramp - 2" Hitch - 500 lbs # FHG69ZR is the lightest weight carrier we offer that is still wide enough to carry your 26" wide lawnmower and weighs in at 77-lbs. The aluminum construction will provide protection from the elements as well as providing a lighter weight than a steel frame. This cargo carrier also comes with a fold up ramp that measures 60" long to help with loading and unloading...
  view full answer...
• What Determines Cargo Weight Limit for Hitch Carrier Installed on RV Bumper Hitch
  The amount of actual cargo weight you can safely transport on a hitch cargo carrier installed in a bumper-mounted hitch is determined by the lowest-rated component. Those components consist of the RV's bumper, the hitch such as # UF35-946401 that is mounted on it, and the cargo carrier itself. The lowest-rated of the three items will determine overall capacity. If you have a 500-lb-rated cargo carrier like Curt # C18151 and install this in the 200-lb-rated Ultra-Fab RV Hitch # UF35-946401...
  view full answer...
• Recommended Method to Carry Kayaks on 2015 Toyota Highlander XLE with Factory Roof Rack
  There are several ways you can go to rig your 2015 Toyota Highlander with fixed factory roof crossbars for transporting kayaks. Adding a secondary roof rack is not an option, however, since aftermarket racks would have to use the same mounting points as your OEM bars. I confirmed this with my contacts at both Rhino-Rack and Thule. But there are also other ways you can carry kayaks that might give you additional cargo-carrying capabilities and/or possibly save you some money as compared...
  view full answer...
  
• Hitch Carrier for Yamaha Zuma 125 Scooter Compatible with Class C Motorhome
  Any accessory carrier made for use on a motorhome or trailer does need to be constructed for that specific application. The reason is that the distance from a motorhome's rear axle to the hitch is typically much greater than that on a passenger car or SUV. That longer distance translates to more motion and stress applied to the hitch and to whatever device is installed in it, such as a scooter or dirt bike carrier. The issue with scooters as compared to a typical dirt bike is that the...
  view full answer...
• Recommended Tie Down Straps for BoxLink System on 2015 Ford F-150
  With the BoxLink system on your 2015 Ford F-150, you have multiple options when it comes to tie down straps. You can attach directly to the BoxLink cleats or hook directly to the interface plate with a bungee cord, S-hook, or E-track fitting. I have attached a link to multiple options for tie downs. A couple popular options are the Erickson E-Track Strap with Ratchet, # EM59136, and Erickson Re-Tractable Ratchet Straps, # EM34415.
  view full answer...
• Attaching Ratchet Straps to a Thule AeroBar Roof Rack on a 2017 Honda Pilot
  I went to our warehouse and measured the webbing loop of the Erickson Re-Tractable Ratchet Straps, part # EM34415 . In this case, you won't be able to get them around the bar. they measure only 2-3/4 inches in length and won't make it around the 3-1/4 inch diameter aeroblades. Your best bet is something like a Ratchet Grab Tie-Down, part # RRSRG that mounts into the C-Channel of your crossbars and allows you to connect to the bar itself or to an installable Eye-bolt, part # S604. I test...
  view full answer...
• Can a Push Lawnmower Be Transported on Pro Series Hitch Cargo Carrier # PS1040100
  The Pro Series Hitch Cargo Carrier, part # PS1040100, will fit on a 2-inch hitch receiver and has a weight capacity of 400 lbs. It has usable platform dimensions of 47-3/4 inches long x 31-3/4 inches wide x 2-3/4 inches deep. A standard push lawnmower should be within those guidelines. I would recommend to measure your lawnmower to make sure. As long as your vehicle has a 2-inch hitch receiver, and the lawnmower is within the dimensions mentioned above you should be able to use the # PS1040100...
  view full answer...
• Solution for Carrying Mobility Scooter with Trailer Hitch Carrier on 2015 Chevrolet Equinox
  I have a solution for you, but unfortunately, we do not have a hitch cargo carrier that will work well to transport a mobility scooter with your 1-1/4 inch, Class II trailer hitch. All of the Class II compatible cargo carriers we offer are either enclosed carriers or flat carriers that do not have a ramp to easily load a scooter. The best solution to be able to carry the mobility scooter is to replace the Class II trailer hitch on your 2015 Chevrolet Equinox with a Class III hitch that...
  view full answer...
• Hitch Mounted Cargo Carrier With Ramp To Carry A Lawnmower And Trimmers
  I do have a couple of options that will work great for you. The first option that I recommend, is going with the: -Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp # FHG77ZR. This is a hitch mounted cargo carrier that will slide into your 2" trailer hitch, and provide you will a 38" x 50" cargo space with a ramp so you can load your lawn mower and your trimmers. This cargo carrier has a maximum carrying capacity of 500lbs, and includes 6 built in eye hooks for tie down points. For...
  view full answer...
  
• Recommended Load Stops for Square Crossbars
  If your Leer Camper has a Thule SquareBar like item # TH712400 you will be able to use the Thule Load Stops for Square Load Bars item # TH503. These load stops fit square crossbars that are 1-1/4" wide x 7/8" tall. It doesn't matter how long they are. If you have a different brand of crossbars I would just need to know the dimensions of them and try to find something that will fit. Square bars don't have a lot of options for accessories so you may need to go with a set of the Erickson...
  view full answer...
• How To Carry Ladder On 2018 Toyota Tacoma With Factory Tonneau Cover
  I do have an option for you but since the 2018 Toyota Tacoma does not have stake pockets there is not a ladder rack that fits with the tonneau cover installed because they would share the same mounting locations. I recommend the Erickson Big Bed Load Extender part # EM07600-07601 that fits into a 2" hitch and a single cross bar on the cab of the truck to carry the ladder with tie downs like part # EM34415. To install the single load bar I recommend part # DK174H for the fit kit, part...
  view full answer...
• Best Cargo Carrier for a Razor 24-Volt Electric Dirt Quad Ride On
  I have the perfect carrier for your Razor 24-Volt Electric Dirt Quad Ride On. For this, I recommend the Flint Hill Goods 30x50 Cargo Carrier part # FHG77ZR. According to my research, the Dirt Quad measures to be 40" long x 22.5" wide and the internal dimensions of the above basket are 50" long x 30" wide. Therefore, this carrier will work well for you. It also has a 48" long ramp for easy loading and built-in reflectors to add visibility for increased safety. In order to secure the Dirt...
  view full answer...
• Recommended Hitch Mounted Carrier With Ramp For Mower And Rototiller On 2011 Toyota Tacoma
  We do have just what you are looking for. I recommend the Flint Hill Goods Carrier With Ramp, part # FHG77ZR. This carrier fits receiver openings and has a weight capacity of 500 lbs. The carrier measures 50 long x 30 wide x 6-1/2 tall. This carrier has a ramp as you mentioned. The ramp measures 28 inches wide and is 48 inches long. When folded down the distance form the center of the hitch pin hole to the closest edge of the carrier is 14 inches. This carrier comes with an anti-rattle...
  view full answer...
• Tie Down Anchor and Ratchet Strap Recommendation for Adarac Aluminum Series Ladder Rack
  Adarac recommends the Aluminum Tie-Downs for Adarac Aluminum and Aluminum Pro Series Ladder Rack Utility Rails # A4000882 in the channels of their ladder racks. Then for ratchet straps to fit the anchors we have the Retractable Ratchet Straps # EM34415 which are 6 feet long and have a 500 lb capacity.
  view full answer...

Do you have a question about this Ratchet Strap?