When you’re running a 10,000-lb heavy-duty axle, you need hardware that can take the load. This U-bolt plate is built from solid 1/4" thick steel to handle the stress without flexing. It provides a strong connection point between your round, 5" diameter axle and 3" wide leaf springs, keeping everything tight and aligned under weight.
A loose or shifting suspension setup can throw off your ride and wear out parts faster. This plate works with two 5/8" diameter round U-bolts (sold separately) to clamp the axle firmly to the springs. The fit is dialed in for round, 5" diameter trailer axles and 3" wide leaf springs, giving you a precise and reliable hold where it matters most.
Good alignment starts with accurate spacing. This plate measures 6" long by 9" wide with bolt holes spaced 5" apart side-to-side and 3" apart front-to-back (inside to inside). The layout distributes clamping force evenly across the spring pack so the axle stays centered and secure mile after mile.
Made to pair with 10,000-lb heavy-duty Dexter axles, this U-bolt plate stands up to demanding use on loaded trailers. Its sturdy construction resists bending and keeps your suspension tight whether you’re hauling equipment or heading down rough roads.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at a U-bolt plate for 5 inch diameter round trailer axles with 3 inch wide springs. This is used with U-bolts to secure an axle to leaf springs which are mounted to the trailer frame. It's made from a durable steel construction. It attaches with two 5/8 inch diameter round U-bolts which are sold separately and available at E-trailer.com. This unit measures edge to edge going this direction about 9 inches and then going this direction, edge to edge, it measures about 6 inches.It fits round trailer axles with a 5 inch diameter. We can tell that by taking a measurement from this hole to this hole, closest edge to closest edge, and you can see that that measures 5 inches and it's designed for 3 inch wide leaf springs.
We can tell that by going edge to edge of the hole right here, and we can see that we got space in there for a 3 inch wide spring. It is designed for use with 10,000 pound heavy duty Dexter axles. That's gonna do it for today's look at the U-bolt plate for 5 inch diameter round trailer axles with 3 inch wide springs.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.