What Are The Dimensions and Bolt Hole Spacing For U-Bolt Plate Part # 12-53
Published 10/13/2010
Question:
I need the exact dimensions of this product. Distances between all the bolt holes, and overall sizes of the plate itself length, width. Thank You!
asked by: Mark T
Expert Reply:
I measured U-Bolt Plate, part # 12-53, and the bolt hole spacing is 5 inches inside hole to inside hole and 3 inches inside hole to inside hole. The overall dimensions of part #12-53 are 6 inches by 9 inches and 1/4 inch thick.
I contacted our representative at Redline and he informed me that part # 12-53 can be used with 10K heavy duty, 5 inch round axles with 3 inch wide springs.
I have linked a picture that I took of part # 12-53 that shows the dimensions and bolt hole spacing.
Product Page this Question was Asked From
U-Bolt Plate for 5" Diameter, Round Trailer Axles with 3" Wide Springs
- Trailer Suspension Parts
- U-Bolt Plates
- Camper
- Car Hauler
- Utility Trailer
- 10000 lbs
- Round Axle - 5 Inch
- 5/8 Inch Diameter
- Redline
more information >
Continue Researching
- Q&A: What Is The Span Or Usable Length Of RV Designer Hitch Pin - 1/2" # RD83GR
- Q&A: Replacement Actuator for a TDE Model LP7000
- Q&A: Replacement Brake Actuator for Tie Down Engineering LP7000
- Q&A: Replacement Surge Brake Actuator For Tie Down Engineering LP 7000 Actuator
- Q&A: Replacement Surge Brake Actuator for 2017 Trailstar Trailer
- Q&A: Recommended Flush Door Latch for Wells Cargo Trailer
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Article: Trailer Lighting Requirements
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Double-Eye Trailer Suspension System Review