3/4" Diameter suspension bolt is use to secure the equalizer to a hanger in tandem- and triple Hayes axle applications.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the Equalizer Suspension Bolt, which is going to be 4-1/2 inches long and 3/4 inches in diameter. This bolt is going to secure your Equalizer to a hanger in your tandem and triple axle haze axle applications. It's going to be a direct replacement from Redline. It's just going to attach to that center hanger. Now, the lock neck for this is sold separately. You can find that right here at etrailer.com to keep that bolt in place.
Again, it's going to be 4-1/2 inches long going from the head of the bolt to the ends of the threads and then 3/4 of an inch in diameter. The threads per inch, there's going to be 16 and this does come as a quantity of one. That's going to do it for our look at the Equalizer Suspension Bolt.
Fair pricing
fast shipping thanks really needed it..
Good Thank
Junk, soft, low grade material. I would not have bought this if I knew it was that soft.
I am replacing the. Hydraulic ram on my 1986 Case 570 LXT tractor that has grease certs, so I needed a way to lubricate the new ram. Your bolts appear to be what I needed and at a reasonable price I will send a picture when done. Not quite a shackle operation.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.