Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re running heavy-duty axles, you need suspension parts that can keep up. This kit includes left- and right-hand equalizers that are each 14-1/4" long and designed for tandem setups rated from 10,000 lbs to 15,000 lbs. The equalizers balance the load between axles, keeping the trailer steady and level so it tracks straight and smooth even under full weight.
Suspension movement puts a lot of stress on pivot points. This kit uses 6" long x 1-1/8" diameter equalizer bolts with matching locknuts for a secure, long-lasting connection. The large bolt size and precision-fit holes help the equalizers pivot freely without slop, cutting down on play and wear over time.
Your suspension is only as steady as the hangers that hold it. The included 4-1/8" tall center hangers with 1-1/8" bolt holes provide a stout mounting point between the axles. They keep the equalizers aligned and help maintain proper geometry for a consistent ride height and predictable handling.
Getting axle spacing right is key for tire clearance and smooth suspension travel. Each equalizer in this kit is designed to set up 38" between axles, matching Dexter’s heavy-duty tandem layout. It ensures the springs and hangers work together in balance, reducing strain and helping both axles share the load evenly.
Everything to hang your equalizers comes in the box—spring keeper bolts, spring-eye bolts, equalizer bolts, and matching locknuts. With the right sizes and lengths already matched, the setup goes together cleanly and tightens down solid for dependable performance mile after mile.
| Axle Capacity | A - Distance Between Front and Center Hangers | B - Distance Between U-Bolts | C - Distance Between Center and Rear Hangers | D - Distance Between Center of Axle and Trailer Frame |
|---|---|---|---|---|
| 10,000 lbs - 15,000 lbs | 33" | 38" | 32-2/5" | 5-1/2" |

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com and today we're gonna take a look at this Dexter tandem axle trailer equalizer kit. Now this kit includes the equalizers, bolts and center hangers for attaching four three inch slipper leaf springs to your trailer frame with 10,000 pound to 15,000 pound heavy duty Dexter axles. Now you can use this with the kit number that you see there on your screen and that kit includes the front and rear hangers and the mounting hardware necessary for a complete tandem axle kit. So if you are in need of that I am including our item number for that kit as well on your screen. But this kit includes everything that you see here on the table before me. You're going to get two four and one eighth inch tall center hangers with one and one eighth inch bolt holes.
And just to show you how we measure the height of these hangar, in case you are unaware you're just going to measure from the center of the bolt hole to the top of our hangar and that as you can see, gives us our measurement of four and one eighth inch tall on those center hangers. So you're gonna get two of those center hangers and then you're going to get two, one left hand and one right hand, 14 and a quarter inch long equalizers that will allow for 38 inches between your axles. So just to confirm that length with you on these equalizers that you can see, we are sitting at 14 and a quarter inches in length on those equalizers. And then you are going to get two four and a half inch long by half inch in diameter spring keeper bolts with the half inch in diameter lock nuts that I have attached to the bolts. And then two five and a half inch long by one inch in diameter spring eye bolts with two one inch in diameter lock nuts that I have attached there.
And then finally two six inch long by one and one eighth inch in diameter equalizer bolts with two of the one and one eighth inch diameter lock nuts that I have there attached. So this does not include the components for amounting axles to springs. Instructions are included and that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews

Annette
4/29/2021
This is still working great. Its been nice to know this was fixed with a good part and is something we dont have to worry about.

Nick S.
11/17/2025
That is great to hear! I am glad you are liking it and the installation wasn't too bad. What kind of trailer did you replace this on?



Damon
4/5/2026
Year later and still very happy. Brought a well used, 30 year old trailer back to life.


Greg
9/4/2025
Great!

Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Daniel
7/12/2022
Still very satisfied after a year. customer service is 1010. thank you!