bing tracking image
  1. Trailer Lights
  2. TecNiq
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
TecNiq 7 Function Slim Line Tail Light - 6" - Pigtail - Right Side
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TecNiq

TecNiq 7 Function Slim Line Tail Light - 6" - Pigtail - Right Side

Part Number: TN99AR
In Stock
$27.95
Retail:$31.34
You Save: 11%
Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Slim, right-side 7-function tail light that installs with standard bolts and a 12" pigtail. Sealed and submersible for ramps and storms, with bright LEDs and a tough lens to keep you seen mile after mile. Great Prices for the best trailer lights from TecNiq. TecNiq 7 Function Slim Line Tail Light - 6" - Pigtail - Right Side part number TN99AR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Videos (2)
  • Photos

TecNiq Trailer Lights - TN99AR

Highlights

  • One Light, 7 Functions: Stop, turn, tail, side marker, clearance, rear and side reflectors in a single unit.
  • Ready for Any Weather: IP68 dust- and waterproof with hermetic seal keeps moisture out.
  • Built to Last: Potted electronics and impact-resistant lens handle bumps and rough roads.
  • Simple Power Hookup: 12" pigtail with color-coded wires for an easy, clean connection.
  • Quick Mounting: Uses two 1/4"-20 carriage bolts for secure surface mounting.
  • Road Legal: Meets FMVSS 108 requirements for visibility and safety compliance.
Made in USA

Features to know about

Brighter Lighting, Lower Power Draw: High-Efficiency LED Design

Upgrading from older bulbs makes a big difference in visibility. This 6" x 3-9/16" x 2-1/4" right-side tail light uses six LEDs that stay bright and consistent across 9 to 14 volts. The LEDs draw little power yet throw a crisp red light for stop, turn, tail, and marker functions. That means clear signals even in daylight, no filaments to burn out, and a setup that lasts mile after mile.

Confidence in Any Weather: IP68 Dust- and Waterproof Build

Rain, road spray, or a dunk at the boat ramp—this light is built to handle it. Its hermetically sealed body with potted electronics meets IP68 standards for dust and water protection. The sealed design keeps moisture out and prevents corrosion inside the housing, so you can count on it no matter where the road takes you.

Safer Towing Visibility: Seven Functions in One Compact Unit

One sleek housing covers every requirement—stop, turn, tail, side marker, clearance marker, rear reflector, and side reflector. Having all seven functions built into one light makes wiring straightforward and helps ensure your trailer is fully compliant with lighting regulations. You get a cleaner install without extra lights cluttering the back end.

Easy Mounting for Tight Spaces: Simple Surface Installation

Mounting this light is simple and solid. It uses two standard 1/4"-20 carriage bolts (not included) for a surface install and connects through a 12" pigtail harness. Each wire is clearly identified—white for ground, brown for brake lights, green for right turn, yellow for left turn—so setup is quick with minimal tools required.

Built Tough for the Long Haul: Impact-Resistant Lens and Lifetime Warranty

The rugged lens meets FMVSS 108 requirements for durability and safety. It resists cracking and road debris impacts, keeping your light safe through years of use. TecNiq backs it with a lifetime warranty, giving you confidence that this tail light is built to last as long as your trailer does.

Specs

Dimensions

  • Dimensions: 6" x 3-9/16" x 2-1/4"

Electrical

  • LEDs: 6
  • Voltage: 9 to 14 volts

Color

  • Color: Red

Mounting

  • Mounting: Uses (2) 1/4"-20 carriage bolts (not included)
  • Connector: 12" pigtail

Wiring

  • Wire colors: White: ground
  • Wire colors: Brown: brake lights
  • Wire colors: Green: right turn
  • Wire colors: Yellow: left turn

Warranty

  • Warranty: Lifetime warranty

T86-RR2RP-1 7 Function 6" Box Tail Light - Passenger Side - Pig Tail





Video of TecNiq 7 Function Slim Line Tail Light - 6" - Pigtail - Right Side
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of TecNiq Trailer Lights - Tail Lights Right Side - TN99AR

Hi, everyone. Steven here with etrailer.com. Let's take a look at our TecNiq 7-Function Slim Line Taillight for the right hand side. So folks, again, this is TecNiq's 7-Function Slim Line Taillight, and it's able to meet all requirements for your stop, turn, tail side marker, clearance marker, rear reflector and side reflector, in a revolutionary cost effective design. Now again, this is the right hand side. If you need the left hand side or the driver's side, that is the side that would include the license plate light.

As you can see, this one does not have that. So again, that left hand, item number is TN39AR sold separately. Again, we are looking at the right hand side or passenger side today. Now, this is 6 inches long by 3 1/2 inches tall by 2 inches wide. And as you can see, I've got it pre-wired up right now giving us our running lights.

And let's see if we can show the brake lights here. Bear with me. All right. So yeah, whenever you hit your brakes, it would be brighter. And then same thing, your blinker would blink.

Let's go ahead and shut off the overhead lights in the studio and take a look at this in the dark. So, as you can see, very, very effective at getting your attention. And if we zoom out, same thing. So, as you can see, it's pretty bright. It's gonna get the job done.

It's gonna make you visible at all angles while you're driving and keep you safe, and keep other people on the road safe, alerting them of your presence as well. So again folks, we do carry both the driver and passenger side sold separately. And on the backside of this, you have two slots here. You would need two mounting carriage bolts sold separately that would go into your trailer frame and this would literally just pop right down onto those carriage bolts and it would hold snug in place with that plastic housing. So again, a great option. It is dust and waterproof. It's been hermetic-sealed to prevent dust and water from getting inside. And it has a nice durable impact resistant lens. And again, you have your side reflectors and everything, as well as your front reflectors as well. Runs on 12 volts. That that will wrap it up, folks, for our quick look together at this TecNiq 7-Function Slim Line right side assembly. I'm Steven. Reach out to us if you have questions or concerns, or if you're still confused about which side you need. Have a good one.

Ratings & Reviews

No reviews

5 Stars
(0)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
0
0
true

See what our Experts say about this TecNiq Trailer Lights


Info for this part was:

Employee Steven C
Installed by:
Steven C
Employee Kurt W
Installed by:
Kurt W
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Sabrina W
Written by:
Sabrina W
Employee Kara L
Edited by:
Kara L
Employee Evan R
Video by:
Evan R

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924